Analysis of multiple cracks in thin coating on orthotropic substrate under mechanical and residual stresses

The analysis addresses a typical failure development pattern in thin films consisting of a system of multiple surface cracks leading to and branching along or near the interface between the film and the base material. The process is driven by thermal residual stresses and/or mechanical loading. Due to the high temperature gradients during the fabrication process, usually a net of surface cracks develops, which gives the appearance of a granular structure of the surface. A periodic array of parallel surface cracks is assumed. A “unit cell” or single cracked segment attached to the substrate is analyzed instead by assuming the channel cracks are spaced more or less uniformly and perfectly aligned in parallel in the transverse direction of the coating. The analysis is specialized to orthotropic and transversally isotropic materials. The problem is solved using FEM combined with the reciprocal theorem. Matched asymptotic procedure [Leguillon D, Sanchez-Palencia E. Computation of singular solutions in elliptic problems and elasticity. Paris: Masson; 1987; Vu-Quoc L, Tran VX. Singularity analysis and fracture energy-release rate for composites: piecewise homogenous-anisotropic materials. Comput Methods Appl Mech Engng 2006;195:5162-97] is used to derive the change of potential energy. Higher-order terms in the asymptotics are considered. The competition between penetration and debond for periodically distributed edge cracks especially near the critical value of the ratio of fracture spacing to the layer thickness is examined.     

Use of Polyaminocarboxylic Acids as Hydrophilic Masking Agents for Fission Products in Actinide Partitioning Processes

During the partitioning of trivalent actinides from High Active Raffinate (HAR) solutions, most processes have to cope with an undesirable co-extraction of some of the fission products. Four hydrophilic complexing agents of the group of polyaminocarboxylic acids, namely EDTA, HEDTA, DTPA, and CTDA were tested and compared for their ability to complex fission products in a simulated PUREX raffinate solution, thereby preventing their extraction into an organic solvent. Several solvents, based on TODGA and the DIAMEX reference molecule DMDOHEMA, that are commonly known to show quite high Zr and Pd co-extraction, were studied. Our investigations ultimately resulted in a substitution of oxalic acid and HEDTA by cyclohexanediaminetetraacetic acid (CDTA). A small addition of this hydrophilic complexing agent to the feed decreased the distribution ratios of Zr from 100 to <0.01. The suppression of Pd was also very effective, resulting in >90% of the metal retained in the feed solution. The extraction of trivalent actinides and lanthanides was not negatively affected by the presence of CDTA. Furthermore, experiments with high concentrations of Zr proved the applicability of this new masking agent. The suppression of Zr and Pd extraction was also verified at a high Pu loading which makes CDTA as a masking agent attractive for grouped actinide extraction processes (GANEX) as well as DIAMEX-SANEX type separations.     

Interface Modifications of InAs Quantum‐Dots Solids and their Effects on FET Performance

InAs nanocrystals field‐effect transistors with an ON/OFF ratio of 10⁵ are reported. By tailoring the interface regions in the active layer step‐by‐step, the evolution of the ON/OFF ratio can be followed from approximately 5 all the way to around 10⁵. The formation of a semiconducting solid from colloidal nanocrystals is achieved through targeted design of the nanocrystal–nanocrystal interaction. The manipulation characteristics of the nanocrystal interfaces include the matrix surrounding the inorganic core, the interparticle distance, and the order of nanocrystals in the 3D array. Through careful analysis of device characteristics following each treatment, the effect of each on the physical properties of the films are able to be verified. The enhanced performance is related to interparticle spacing, reduction in sub‐gap states, and better electronic order (lower σ parameter). Films with enhanced charge transport qualities retain their quantum‐confined characteristics throughout the procedure, thus making them useful for optoelectronic applications.     

Improvement of the catalytic isomerization performance for sulfated zirconias by use of templating techniques

New sulfated zirconias covering a wide range of pore diameters from micropores to macropores have been prepared by a combined use of two different structure-directing templates. The catalytic performance of these sulfated zirconias for the n-butane isomerization could be improved significantly compared to a standard displaying a maximum rate of isomerization of 1490 μmol/g h at 423 K. The materials remained their high activity even at 348 K. Moreover, deactivated materials could be reactivated to the original activity in an air-flow at 673 K several times. The newly designed materials were fully characterized by XRD, XPS, TPD of ammonia, IR spectroscopy and N₂ adsorption to describe the formation of active surface centres and their morphology. The formation of active pyrosulfates with sulfate bands above 1400 cm^?1 was followed by DRIFTS. An increased ratio of Brønsted-to-Lewis centres could be detected which can be accounted for the unexpected high activity.     

The Rengen Grassland Experiment: soil contamination by trace elements after 65 years of Ca,N, P and K fertiliser application

The Rengen Grassland Experiment (RGE) was established in the Eifel Mts. (Germany) on a low productive Nardetum in 1941. Since then, the following fertiliser treatments have been applied along with a two cut system: unfertilised control, Ca, CaN, CaNP, CaNP–KCl and CaNP–K₂SO₄ with basic slag (syn. Thomas phosphate) as the only P fertiliser. The effect of long-term fertilisation on plant-available (extracted with 0.01 mol l⁻¹ CaCl₂), easily-mobilisable (extracted with 0.05 mol l⁻¹ EDTA), potentially-mobilisable (extracted with 2 mol l⁻¹ HNO₃) and total concentrations of trace elements (As, Cd, Cr, Cu, Fe, Mn, Ni, Pb and Zn) in the top 0–10 and 10–20 cm of soil were investigated in 2006. According to redundancy analysis (RDA), the effect of treatment on the concentrations of risk elements was significant and explained 82.3 and 90.6% of the variability in the data in the 0–10 and 10–20 cm soil layers, respectively. Basic slag supplied the soil with considerable amounts of As, Cr, Cu, Fe, Mn and Zn. Following 65 years of fertiliser application the concentrations of risk elements in the soil profile had increased substantially, especially with basic slag. However, threshold limits for total trace element concentration in soil permitted by Czech national legislation were exceeded only in the case of As. The increase in plant-available As concentrations was most critical as it increased the potential uptake of As by plants in plots fertilised with P. Although P treatments received more than 300 g of Cr ha⁻¹ annually, no effect on plant-available Cr soil content was detected. This contrasted with the accumulation of total Cr in the 0–10 and 10–20 cm soil layers. Furthermore, plant availability of Cd, Fe, Mn and Zn was affected by soil pH and generally decreased with the application of quick lime. Plant availability of these elements was not correlated with amounts supplied by fertilisers.     

Therapies Targeted at Non-Coding RNAs in Prevention and Limitation of Myocardial Infarction and Subsequent Cardiac Remodeling—Current Experience and Perspectives

Myocardial infarction is one of the major causes of mortality worldwide and is a main cause of heart failure. This disease appears as a final point of atherosclerotic plaque progression, destabilization, and rupture. As a consequence of cardiomyocytes death during the infarction, the heart undergoes unfavorable cardiac remodeling, which results in its failure. Therefore, therapies aimed to limit the processes of atherosclerotic plaque progression, cardiac damage during the infarction, and subsequent remodeling are urgently warranted. A hopeful therapeutic option for the future medicine is targeting and regulating non-coding RNA (ncRNA), like microRNA, circular RNA (circRNA), or long non-coding RNA (lncRNA). In this review, the approaches targeted at ncRNAs participating in the aforementioned pathophysiological processes involved in myocardial infarction and their outcomes in preclinical studies have been concisely presented.     

Design of flexible assembly line to minimize equipment cost

In this paper we develop an optimal and a heuristic algorithm for the problem of designing a flexible assembly line when several equipment alternatives are available. The design problem addresses the questions of selecting the equipment and assigning tasks to workstations, when precedence constraints exist among tasks. The objective is to minimize total equipment costs, given a predetermined cycle time (derived from the required production rate). We develop an exact branch and bound algorithm which is capable of solving practical problems of moderate size. The algorithm's efficiency is enhanced due to the development of good lower bounds, as well as the use of some dominance rules to reduce the size of the branch and bound tree. We also suggest the use of a branch-and-bound-based heuristic procedure for large problems, and analyze the design and performance of this heuristic.     

RNA amplification chip with parallel microchannels and droplet positioning using capillary valves

We present results from the MicroActive project which develops an instrument for molecular diagnostics. The instrument is first tested for patient screening for a group of viruses causing cervical cancer. Two disposable polymer chips with reagents stored on-chip are developed and will be inserted into the instrument for each patient sample analysis. The first chip will perform nucleic acid extraction from patient epithelial cervical cells, while mRNA amplification and fluorescent detection takes place in the second chip. This paper reports results on the amplification chip. Purified sample is inserted into the chip and split into ten smaller droplets for simultaneous amplification and detection of ten viruses. The droplets move in parallel channels, each with two chamber extensions containing dried reagents. Experimental results on parallel droplet movement using one external pump combined with hydrophobic restrictions show that the parallel droplet positions can be controlled. There are four valves with increasing burst pressures between 800 and 4,500 Pa in each parallel channel, positioning the droplets in metering zones and reaction chambers. The re-hydration times for the dried reagents in micro chambers have been monitored. After sample insertion, uniform concentration of the reagents in the droplet was reached after respectively 60 s and 10 min. These times are acceptable for successful amplification. Finally we show positive amplification of HPV type 16 viruses in a micro chamber.