Two-channel switched reluctance starter/generator results

Measured data and simulation results for a two-channel experimental switched-reluctance-motor (SRM)-based aircraft engine starter/generator system are presented. The two channels of the system provide power to two separate and independent loads. The results presented document the performance capability of this system with both channels operating simultaneously. Both measured and predicted system performance are presented and compared. In addition, operating characteristics that are unique to this SRM-based system are described. Of particular interest are the interactions between the two separate channels when one channel experiences a load transient and the other channel does not. The source of channel interactions is described, and measured data is provided. The issue of clearing load faults is also addressed. Design results for adding this capability to the experimental system are described     

Analytic investigation of frequency sensitivity in microwave oscillators: Application to the computation of phase noise in a dielectric resonator oscillator

The conversion of low frequency noise into phase noise in microwave oscillators is studied through an analytical calculation of the pushing factor. This calculation is based on a simplified equivalent circuit for two types of active devices : field effect transistors (Fet) and heterojunction bipolar transistors (hbt). The preeminence in the conversion process of the gate- source capacitance in theFet and the base- emitter junction in thehbt is pointed out. Practical methods are proposed to reduce the phase noise in these circuits.     

Blocage par injection de modes sous- harmoniques d’un oscillateur utilisant une ligne à retard à ondes de surface

A nonlinear regeneration pulsed oscillator driven by a monochromatic source has been built. Subharmonics of the resonance carrier/modulation are measured with an accuracy of 10^-10 thanks to the use of a double beats measurement set-up. The multiscale analysis of frequency readings reveals a rich fine structure which is in agreement with the nonlinear topological approach of synchronized states.     

Synchronization,topology and oscillators

The synchronization of oscillators is defined step by step from the exemple of an electronic phase-locked loop. Besides, an injection-locked pulsed delay oscillator is built in which the signal is synchronized both in its frequency and its duration : the local behaviour (the carrier) is thus resonating with the global behaviour (the envelope). A model of the electronic wave function in terms of the fundamental groups of punctured Riemann surfaces is attempted. The structure of synchronization zones goes in favour of that hypothesis.     

Boundary scan test,test methodology,and fault modeling

The test technique called boundary scan test (BST) offers new opportunities in testing but confronts users with new problems too. The implementation of BST in a chip has become an IEEE standard and users on board level are the next group to begin thinking about using the new possibilities. This article addresses some of the questions about changes in board-level testing and fault diagnosis. The fault model itself is also affected by using BST. Trivial items are extended with more sophisticated details in order to complete the fault model. Finally, BST appears to be a test technique that offers a high degree of detectability on board level, but for diagnosis, some additional effort has to be made.     

Rate of adsorption to and desorption from a langmuir surface: The case of zero activation barrier to adsorption without dissociation

Many rate constants of elementary steps on single crystals have been measured. Their pre-exponential factors can now be compared to those calculated by transition state theory. Such a calculation is presented in this Letter with due attention to microscopic reversibility, standard states, and configurational entropy.     

Fundamental Limit of OFDM Range Estimation in a Separable Multipath Environment

In this paper, orthogonal frequency division multiplexing (OFDM) for time-based range estimation (TBRE) in a separable multipath channel is investigated and analyzed with respect to its accuracy. First, the Cramer–Rao lower bound (CRLB) in a separable multipath channel is theoretically derived, and indicates a similar expression to that for a single path channel. The CRLB for non-data-bearing (NDB) OFDM transmission is compared to that for pseudo-noise (PN) transmission, demonstrating a large performance gap in favor of the NDB OFDM. Furthermore, the maximum likelihood estimator (MLE) for TBRE in a separable multipath channel is theoretically derived, also demonstrating a similar expression to that in a single path channel, except that several peaks instead of one peak are expected in a separable multipath channel corresponding to all arrival paths. The MLE for TBRE is then compared to the commonly used MLE for channel estimation, showing an equal performance in terms of mean square error when using an NDB OFDM transmission. Simulation results demonstrate a good agreement with our proposed theory.     

Modeling Feedback Bridging Faults with Non-Zero Resistance

We study the behavior of feedback bridging faults with non-zero bridge resistance in both combinational and sequential circuits. We demonstrate that a test vector may detect the fault, not detect the fault or lead to oscillation, depending on bridge resistance. Moreover, the resistance intervals in which a particular behavior is observed are not necessarily contiguous. We demonstrate non-trivial behavior for situations in which a detection seems impossible, namely disabled loops going through a gate with controlling values on its side inputs.We outline the multiple strengths problem which arises due to the fact that a critical bridge resistance depends on the strengths of the signals driving the bridge, which in turn are functions of the number of the on-transistors, these again depending on the bridge resistance, making such a fault very hard to resolve. For sequential circuits, we describe additional difficulties caused by the need to account for implications on bridge behavior, which have originated in the previous time frames. We conclude that the complexity of resistive feedback bridging fault simulation accurate enough to resolve such situations will probably be prohibitively high and propose possible simplifying assumptions. We present simulation results for ISCAS benchmarks using these assumptions with and without taking oscillation into account.This revised version was published online in March 2005 with corrections to the cover date.     

Carrier Transport Enhancement Mechanism in Highly Efficient Antimony Selenide Thin-Film Solar Cell

Exhibiting outstanding optoelectronic properties, antimony selenide (Sb₂Se₃) has attracted considerable interest and has been developed as a light absorber layer for thin-film solar cells over the decade. However, current state-of-the-art Sb₂Se₃ devices suffer from unsatisfactory “cliff-like” band alignment and severe interface recombination loss, which deteriorates device performance. In this study, the heterojunction interface of an Sb₂Se₃ solar cell is improved by introducing effective aluminum (Al³⁺) cation into the CdS buffer layer. Then, the energy band alignment of Sb₂Se₃/CdS:Al heterojunction is modified from a “cliff-like” structure to a “spike-like” structure. Finally, heterojunction interface engineering suppresses recombination losses and strengthens carrier transport, resulting in a high efficiency of 8.41% for the substrate-structured Sb₂Se₃ solar cell. This study proposes a facile strategy for interfacial treatment and elucidates the related carrier transport enhancement mechanism, paving a bright avenue to overcome the efficiency bottleneck of Sb₂Se₃ thin-film solar cells.