Properties of mineral filled poly(lactic acid)/poly(methyl methacrylate) blend

This study examines the influence of three different minerals, that is, clay, calcium carbonate, and quartz on the physical, thermal, and mechanical properties of poly(lactic acid) (PLA)/poly(methyl methacrylate) blend. Rheological behavior and phase structure were initially studied by small-amplitude oscillatory shear rheology. Clay- and quartz-filled materials presented an increase in viscosity at low frequency associated with the presence of a yield stress. However, this behavior was not observed for calcium carbonate filled materials due to a matrix degradation effect. To elucidate this aspect, thermal stability and thermal properties were examined by thermogravimetric analysis and differential scanning calorimetry, showing that calcium carbonate promotes degradation of the PLA phase. No nucleating effect was observed in the presence of the minerals. Dynamical mechanical analysis and mechanical characterization revealed an increase of the overall softening temperature and, a reinforcing effect for clay- and quartz-based composites. © 2018 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2019 , 136, 46927.     

Coating carbon nanotubes with a polystyrene-based polymer protects against pulmonary toxicity

Background  

carbon nanotubes (CNT) can have adverse effects on health. Therefore, minimizing the risk associated with CNT exposure is of crucial importance. The aim of this work was to evaluate if coating multi-walled CNT (MWCNT) with polymers could modify their toxicity, thus representing a useful strategy to decrease adverse health effects of CNT. We used industrially-produced MWCNT uncoated (NT1) or coated (50/50 wt%) with acid-based (NT2) or polystyrene-based (NT3) polymer, and exposed murine macrophages (RAW 264.7 cell line) or Balb/c mice by intratracheal administration. Biological experiments were performed both in vitro and in vivo, examining time- and dose-dependent effects of CNT, in terms of cytotoxicity, expression of genes and proteins related to oxidative stress, inflammation and tissue remodeling, cell and lung tissue morphology (optical and transmission electron microscopy), and bronchoalveolar lavage fluid content analysis.     

Towards continuous sustainable processes for enzymatic synthesis of biodiesel in hydrophobic ionic liquids/supercritical carbon dioxide biphasic systems

The excellent suitability of immobilized Candida antarctica lipase B (Novozym 435) catalyst to carry out the synthesis of methyl oleate (biodiesel) by methanolysis of triolein in ILs based on imidazolium cations with large alkyl side chain (from C₁₂ to C₁₈) has been demonstrated at 60 and 85 °C. The phase behaviour of IL/triolein/methanol and IL/methyl oleate mixtures were studied at different concentrations and temperatures, the best results (up to 98.6% biodiesel yield after 6 h) being obtained for ILs able to provide monophasic reaction systems, i.e. 1-methyl-3-octadecylimidazolium bis(trifluoromethylsulfonyl)imide). A continuous enzymatic reactor, based on biocatalysts particles coated with hydrophobic ILs, for biodiesel synthesis in supercritical carbon dioxide was studied at 60 °C and 180 bar. The operational stability of the immobilized lipase was improved by its coating with ILs, i.e. 1-methyl-3-octadecylimidazolium hexafluorophosphate, leading to a two-phase systems with respect to the biodiesel product, which showed an excellent catalytic behaviour in continuous operation under supercritical conditions (up to 82% biodiesel yield after 12 cycles of 4 h).     

Micro and nano cellular amorphous polymers (PMMA, PS) in supercritical CO2 assisted by nanostructured CO2-philic block copolymers - One step foaming process

Microcellular foaming of commodity amorphous polymers, poly(methyl methacrylate) (PMMA), and poly(styrene) (PS) was studied in supercritical CO₂ via a batch one-step process in the presence of block copolymers able to change their foaming behaviour and therefore the porous structures. Triblock (styrene-co-butadiene-co-methylmethacrylate SBM, methylmethacrylate-co-butylacrylate-co-methylmethacrylate MAM) terpolymers were blended to PS or PMMA by extrusion. They showed advantages compared to classical PS-PMMA polymer blends in terms of cell size control and reduction of cell size. Foaming is carried out on bulk injection molded samples which were saturated under high pressures of CO₂ (300 bars) at different temperatures (25° C to 80 °C) and different depressurization rates (pressure drop rates from 150 bar/min to 12 bar/min). Very distinct cellular structures and densities were controlled by varying either the copolymer type or the foaming conditions (T,P). Cell sizes ranged from 0.2 μm to 200 μm, and densities from 0.30 g/cm³ to 1 g/cm³ in the polymers considered. Particularly, when triblock copolymers were able to self organize (nanostructuring) in a polymer matrix, they became phase separated at a nanometer level, presenting nanostructured polymers matrixes. To conclude the study, a possible nanostructuring mechanism is suggested based on the interplay between rubbery and highly CO₂-philic blocks/rigid and less CO₂-philic blocks. It is demonstrated that block copolymer additives are a good pathway towards micro and ultra microcellular supercritical CO₂ foaming of amorphous polymers.     

Synthesis and Surface-Active Properties of Uronic Amide Derivatives,Surfactants from Renewable Organic Raw Materials

Short chemical syntheses were developed to produce a new set of surfactants from uronic acids derived from widely available raw materials. Three different strategies were used to synthesize uronic amide derivatives, the structures of which were totally characterized by spectrometric methods (IR, MS, ¹H-RMN and ¹³C-RMN). The best one, using an acid chloride as the synthetic intermediate, furnished the expected amides as a mixture of anomers in 46–58% global yield. Surface-active properties (CMC, γ_cmc, Γ_max, A _min) of homologous series of uronic acid N-alkylamides from C8 to C18 were also assessed. In general, these sugar-based surfactants exhibited good surface-activities, and appeared as valuable nonionic surfactants compared to octylphenol 9–10 ethylene oxide condensate, the most well-known nonionic surfactant. Increasing the alkyl chain length influenced the CMC values for both glucuronic and galacturonic N-alkylamide derivatives. The galacturonic N-alkylamides decreased γ_cmc at slower values than their counterpart’s glucuronic N-alkylamides.     

Effect of pressure on the structure and electrical conductivity of cardanol–furfural–polyaniline blends

Pressure‐sensitive polymers that simultaneously present reasonable electrical conducting properties, useful thermosetting behavior, and softness are hard to develop. To combine these properties into a single material, a cardanol‐based phenolic resin was prepared and blended in situ with polyaniline (PAni). The final polymer blend was composed of a soft solid material that could not be dissolved in ordinary solvents. Samples were characterized through X‐ray scattering, Fourier transform infrared (FTIR) spectroscopy, and electrical conductivity and pressure sensitivity measurements. FTIR results indicate that the insertion of PAni into the blends did not change the chemical nature of the resin. According to wide‐angle X‐ray scattering results, PAni was dispersed homogeneously in the final polymer samples; this improved the sensitivity of the electrical conductivity to pressure variations, as confirmed through electromechanical tests. Pressure sensitivity and electromechanical analyses indicated that the produced blends could be used as pressure‐sensing materials. Among the tested materials, the blends containing 5 wt % PAni·H₂SO₄ presented the largest compression sensitivity values. Finally, it was shown for the first time through XRD analyses under pressure that PAni chains were considerably disturbed by compressive stresses. © 2010 Wiley Periodicals, Inc. J Appl Polym Sci, 2011     

Effect of processing procedures and conditions on structural,morphological, and rheological properties of polyethylene/polyamide/nanoclay blends

The article deals with the effect of processing procedures and conditions on structural, morphological, and rheological properties of ternary blends composed of polyethylene (PE), polyamide (PA)‐12, and organically modified montmorillonite nanoclay with selective affinity. Samples were prepared from PE/PA and PA/PE blends, either by simultaneous mixing or from a polymer/clay masterbatch, using two processing conditions. The results have shown the existence of a weight fraction threshold, above which no significant processing effect was observed. Below this weight fraction threshold, the results tend to underline the significant role of two parameters that depend on processing procedures and/or conditions: the contact time between PE and PA phases and the contact time between clay and PA. Clay structure, blend morphology, and rheological properties were all shown to depend on these two parameters, and also on the nature of the matrix (PE or PA), because of the selective affinity of clay toward polymer phases. POLYM. ENG. SCI., 2011. © 2011 Society of Plastics Engineers     

Plant Chemical Defense Induced by a Seed-Eating Pollinator Mutualist

Plant-seed parasite pollination mutualisms involve a specific pollinator whose larvae develop by consuming a fraction of the host plant seeds. These mutualisms are stable only if the plant can control seed destruction by the larvae. Here, we studied the chemical response of the European globeflower Trollius europaeus to infestation by an increasing number of Chiastocheta fly larvae. We used liquid chromatographic analysis to compare the content of phenolic compounds in unparasitized and parasitized fruits collected in two natural populations of the French Alps, and mass spectrometry and nuclear magnetic resonance to elucidate the structure of adonivernith, a C-glycosyl-flavone. This compound is present in many of the organs of T. europaeus, but not found in other Trollius species. Furthermore, it is overproduced in the carpel walls of parasitized fruits, and this induced response to infestation by fly larvae is density-dependent (increases with larval number), and site-dependent (more pronounced in the high-altitude site). Mechanical damage did not induce adonivernith production. This tissue-specific and density-dependent response of T. europaeus to infestation by Chiastocheta larvae might be an efficient regulation mechanism of seed-predator mutualist population growth if it decreases survival or growth of the larvae.