Desktop X-ray microscopy and microtomography

Recent developments in X-ray microtomography have made it possible to miniaturize a CT scanner into a versatile and cost-effective desktop system that fits into any laboratory environment. The possibilities of the technique are demonstrated for a range of applications. It is also shown how an existing scanning electron microscope with an X-ray detector can, with a specially developed attachment, be transformed into an X-ray microscope and microtomograph.     

A mechanical comparison of high-flexion and conventional total knee arthroplasty

The question addressed in this study was whether high-flexion total knee arthroplasty (TKA) designs improve the mechanical behaviour of TKAs in high flexion and whether they maintain the mechanical performance of conventional TKAs at normal flexion angles. A finite element study was performed in which the mechanical behaviour of the conventional Sigma RP and the new high-flexion Sigma RP-F were compared, during a dynamic simulation of a high-flexion squatting activity. Forces, stresses, and contact positions were calculated during different stages of the simulations. In general, higher stresses were found with larger flexion angles for both designs. Mechanical parameters were similar in normal flexion. In high flexion, lower stress and deformation values were found for the high-flexion Sigma RP-F, except for the contact stress at the post of the insert. This study confirms that a high-flexion design can improve mechanical behaviour at high-flexion without changing the performance in normal flexion. Hence, although a high-flexion TKA may show a similar or better performance in comparison with a conventional TKA, high-flexion activities still cause an increase in the implant stress levels. Therefore, the patient's demand for large flexion angles may reduce the longevity of TKA implants.     

Cryo-X-ray analysis-A novel tool to better understand the physicochemical reactions at the bioglass/biological fluid interface

The present study deals with the short-term physicochemical reactions at the interface between bioactive glass particles [55SiO(2)-20CaO-9P(2)O(5)-12Na(2)O-4MgO. mol%] and biological fluid (Dulbecco Modified Eagle's Medium (DMEM)). The physicochemical reactions within the interface are characterized by scanning transmission electron microscopy (TEM) (STEM) associated with Energy-dispersive X-ray spectroscopy (EDXS). Microanalysis of diffusible ions such as sodium, potassium, or oxygen requires a special care. In the present investigation the cryo-technique was adopted as a suitable tool for the specimen preparation and characterization. Cryosectioning is essential for preserving the native distribution of ions so that meaningful information about the local concentrations can be obtained by elemental microanalysis. The bioglass particles immersed in biological fluid for 24 h revealed five reaction stages: (i) dealkalization of the surface by cationic exchange (Na(+), Ca(2+) with H(+) or H(3)O(+)); (ii) loss of soluble silica in the form of Si(OH)(4) to the solution resulting from the breakdown of Si--O--Si bonds (iii); repolymerization of Si(OH)(4) leading to condensation of SiO(2)); (iv) migration of Ca(2+) and PO(4) (3-) to the surface through the SiO(2)-rich layer to form CaO-P(2)O(5) film; (v) crystallization of the amorphous CaO-P(2)O(5) by incorporating OH-- or CO(3) (2-) anions with the formation of three different surface layers on the bioactive glass periphery. The thickness of each layer is approximately 300 nm and from the inner part to the periphery they consist of Si--OH, which permits the diffusion of Ca(2+) and PO(4) (3-) ions and the formation of the middle Ca--P layer, and finally the outer layer composed of Na--O, which acts as an ion exchange layer between Na(+) ions and H(+) or H(3)O(+) from the solution.     

Digital titration: Automated image acquisition and analysis of load and growth of Chlamydophila psittaci

Traditionally, the amount of infective chlamydiae in a given sample is determined by inoculating dilution series into cell cultures and physically counting chlamydial inclusions. This approach is time consuming, tedious, and error prone, mainly when dealing with high titers. Therefore, this paper describes a largely automated technique that was developed to standardize the determination of chlamydial load in vitro. Cells are fixed at 36 h post-inoculation and bacteria visualized using standard immunological detection methods. Consequently, for 81 microscopic fields, an image is recorded at the interpolated focal plane. These images are then automatically processed using an ImageJ plugin and the obtained results are imported into Excel to determine the number of inclusion forming units per mL in the sample. The main advantage of this technique is that no or minimal sample dilution is required, thus minimizing dilution errors. In addition, this technique was employed during the early, middle and late growth stages of the chlamydial developmental cycle and results correlated well (P < 0.01) with 16S rRNA values from previous experiments, thereby proving its suitability to follow chlamydial growth in vitro. The method described is highly suitable for high throughput titration of cell culture inoculated samples and assessment of possible antichlamydial effects of novel compounds throughout the chlamydial growth cycle. Microsc. Res. Tech., 2009. © 2009 Wiley-Liss, Inc.     

Laboratory techniques for evaluating solid oxide fuel cells

The construction of a small solid oxide fuel cell laboratory is described in terms of required materials, measuring techniques and equipment design. Details of various electrode deposition techniques and ways of making contacts to the electrodes are also outlined.     

Characterization of Grain Boundaries in Superplastically Deformed Y-TZP Ceramics

The effects of compressive deformation on the grain boundary characteristics of fine-grained Y-TZP have been investigated using surface spectroscopy, impedance analysis, and transmission electron microscopy. After sintering at low temperature (1150°C), the grain boundaries are covered by an ultrathin (1nm) yttrium-rich amorphous film. After deformation at 1200°–1300°C under low stress, some grain boundaries are no longer covered by the amorphous film. Yttrium segregation seems to occur only at wetted grain boundaries. Evidence has been found that the extent of dewetting increases with increasing applied stress.     

Evaluation of top, angle, and side cleaned FIB samples for TEM analysis

TEM specimens of a LaAlO(3)/SrTiO(3) multilayer are prepared by FIB with internal lift out. Using a Ga(+1) beam of 5 kV, a final cleaning step yielding top, top-angle, side, and bottom-angle cleaning is performed. Different cleaning procedures, which can be easily implemented in a dual beam FIB system, are described and compared; all cleaning types produce thin lamellae, useful for HRTEM and HAADF-STEM work up to atomic resolution. However, the top cleaned lamellae are strongly affected by the curtain effect. Top-angle cleaned specimens show an amorphous layer of around 5 nm at the specimen surfaces, due to damage and redeposition. Furthermore, it is observed that the LaAlO(3) layers are preferentially destroyed and transformed into amorphous material, during the thinning process.     

Validation of a 3D numerical model of shape memory alloys pseudoelasticity through tensile and bulging tests on CuAlBe sheets

In order to validate a 3D numerical model of the pseudoelastic behaviour of shape memory alloys (SMA) allowing a finite-strain analysis, a set of experimental tests is proposed. First consisting in determining the representative elementary volume (REV) model parameters, tensile tests are performed within a small perturbations context. Therefore, two kinds of structure tests representing different stress states are performed: tensile tests on CuAlBe perforated strips on the one hand and bulging tests on CuAlBe sheets on the other hand. With the update of the material parameters for a finite-strain analysis, it is then possible to compare the experimental and the numerical results obtained from tests on structures submitted to general states of stresses. Besides, pictures correlation and infrared thermography analysis have been used and combined to pinpoint the thermomechanical couplings of SMA behaviour.     

Laser scanning thermoreflectance imaging system using galvanometric mirrors for temperature measurements of microelectronic devices

We present a thermoreflectance imaging system using a focused laser sweeping the device under test with a scanner made of galvanometric mirrors. We first show that the spatial resolution of this setup is submicrometric, which makes it adapted to microelectronic thermal measurements. Then, we studied qualitative temperature variations on two dissipative structures constituted of thin (0.35 microm) dissipative resistors, the distance between two resistors being equal to 0.8 or 10 microm. This technique combines sensitivity and speed: it is faster than a point classical thermoreflectance technique and, in addition, more sensitive than a charge-coupled device thermoreflectance imaging technique.     

THD analysis of compliant journal bearings considering liner deformation

A numerical THD model is developed to investigate the effect of lining compliance on the bearing characteristics. The analysis shows increased load carrying capacity, significantly reduced peak pressures and thicker oil film in the loaded zone compared to a white metal bearing. Slightly thinner oil films are predicted at the bearing edges. Temperature and power loss are found to be similar for some load-speed combinations but higher for other operating conditions. It is also shown that load carrying capacity is more sensitive to thermal expansion while pressure and oil film thickness profiles are more sensitive to elastic deformation.