Isolation and application of a styrene-degrading strain of Pseudomonas putida to biofiltration

A bacterial strain ST201 capable of degrading styrene was isolated from soil and identified as Pseudomonas putida. This strain had high tolerance to styrene and could degrade it completely in 48 h at concentrations up to 600 mg/l. P. putida ST201 was also demonstrated to degrade a mixture of benzene, toluene, ethylbenzene and p-xylene. A packed tower biofilter inoculated with P. putida ST201 was constructed which removed styrene vapor with a styrene elimination capacity of 90 g/m3.h.     

Newly Developed Thyristor Chopper Equipment for Electric Railcars

In the chopper control system for electric railcars, it is effective to adopt high operational frequency of the chopper for achievement of the following: 1) decrease of higher harmonic current induced in the trolley wire, 2) reduction of weight for reactors and capacitors in the traction circuit, and 3) improvement of control response. Through development of reverse-conducting thyristors with very short turn-off time and a repulsion type two-phase chopper, we finally realized production of a new standard high-frequency chopper equipment with regenerative braking for 1500-V dc railcars. Technical achievements mentioned previously were completely realized as a result of adoption of high frequency, 660 Hz, in the equipment. The newly developed standard high-frequency chopper equipment for 30 cars were delivered to the Chiyoda Line of Teito Rapid Transit Authority in Tokyo, and they have been operated satisfactorily in revenue service since March 1971. This paper also describes: 1) the chopper circuit using fast-switching reverse-conducting thyristors and series saturable reactors, 2) analysis of commutation circuit and methods of suppressing reapplied forward voltage increasing rate (dv/dt) and shortening commutation period, 3) the composition of the traction circuit including the protection system, such as protection for overvoltage at the regenerative braking, and 4) test results on the Chiyoda Line of Teito Rapid Transit Authority.     

Low-loss optical glass fibre with Al2O3-SiO2 core

Optical glass fibres, consisting of an Al2O3-SiO2 core and SiO2 cladding, were produced by using a glass growth technique of vapour deposition in a flame. The core measured from 4 to 10 ? in diameter, and the difference in refractive index between the core and the cladding was 0.003. The lowest loss of this fibre was 10 dB/km at 0.66 ?m.     

Reactive extraction of diols with phenyl boronic acid and trioctylmethylammonium chloride as coextractants and quantitative structure–property relationship of their extraction behaviors

BACKGROUND: Diols that can be produced biologically have attracted much attention because of the increased cost of producing them chemically. The cost of separating the diols from the broth forms a major part of the total cost of microbial production. Reactive extraction using organoboronate is one promising method for recovering diols from the dilute aqueous solution. RESULTS: A basic investigation of solvent extraction of diols was conducted at 303 K employing phenylboronic acid and trioctylmethylammonium chloride as coextractants in the mixed solvent. Both the tetrahedral boronate anion complex and trigonal boronate neutral complex were extracted. 1,3‐diols and vicinal diols were extracted, but 1,4‐diol was not extracted. Extraction equilibrium constants were correlated with the enthalpies of formation of the complexes, which were calculated by molecular modeling with semi‐empirical molecular orbital calculations considering the solvent effect. CONCLUSION: The complex extraction behaviour of diols with phenylboronic acid and quaternary ammonium salt can be predicted by using the quantitative structure–property relationship (QSPR). Copyright © 2009 Society of Chemical Industry     

A straight-bladed vertical axis wind turbine with a directed guide vane row — Effect of guide vane geometry on the performance —

The objective of this study is to show the effect of guide vane geometry on the performance. In order to overcome the disadvantages of vertical axis wind turbine, a straight-bladed vertical axis wind turbine (S-VAWT) with a directed guide vane row has been proposed and tested by the authors. According to previous studies, it was clarified that the performance of the turbine can be improved by means of the directed guide vane row. However, the guide vane geometry of S-VAWT has not been optimized so far. In order to clarify the effect of guide vane geometry, the effects of setting angle and gap between rotor blade and guide vane on power coefficient and starting characteristic were investigated in the experiments. The experimental study of the proposed wind turbine was carried out by a wind tunnel. The wind tunnel with a diameter of 1.8m is open jet type. The wind velocity is 8 m/s in the experiments. The rotor has three straight blades with a profile of NACA0018 and a chord length of 100 mm, a diameter of 0.6 m and a blade height of 0.7 m. The guide vane row consists of 3 arc plates.     

Superconducting Gap Structure of YNi2B2C Determined by Thermal Conductivity

In order to determine the superconducting gap structure of the borocarbide superconductor YNi₂B₂C, we have measured the angular variation of the c-axis thermal conductivity _zz in magnetic field rotated within the ab-planes. A clear fourfold symmetry with narrow cusps was observed in the angular variation of _zz . These results provide a strong evidence that the gap function has point nodes which are located along the a- and b-axes of the crystal.     

First plasma experiment on spherical tokamak device UTST

The UTST (University of Tokyo Spherical Tokamak) device was constructed for the purpose of exploring the formation of ultrahigh‐beta ST (spherical tokamak) plasma using the double null plasma merging method. When two plasmas merge together to form a single plasma, magnetic field lines reconnect, and magnetic field energy is converted to plasma kinetic energy, increasing the plasma beta. Merging start‐up has been demonstrated in the TS‐3/4, START, and MAST devices using coils inside the vacuum vessel, and the TS‐3 plasma obtained a 50% beta. In order to demonstrate start‐up in a more reactor‐relevant situation, UTST has all poloidal field (PF) coils outside the vacuum vessel. The first plasma experiment on the UTST was begun in December 2007. In the results, the plasma obtained 10 kA by using only the outer PF coils and a single ST was generated in the lower area (z = –0.3 to –1.0 m) close to a washer gun. This result suggests that another washer gun on the top of the UTST can allow the generation of ST in the upper area and merging start‐up by using outer PF coils. © 2012 Wiley Periodicals, Inc. Electr Eng Jpn, 179(2): 20–26, 2012; Published online in Wiley Online Library ( wileyonlinelibrary.com ). DOI 10.1002/eej.21216     

Transflective IPS‐LCD with improved reflective contrast ratio

Abstract— In order to improve the reflective contrast ratio of transflective IPS‐LCDs, a novel pixel design for a normally white reflective IPS has been proposed. In this design, the large‐inter‐electrode‐spacing layout using a novel driving method and a double‐layered electrode have effectively reduced the light leakage. By applying these two technologies, a transflective IPS‐LCD has been successfully demonstrated with a high contrast ratio (15:1) in the reflective mode and a wide‐viewing‐angle characteristic in the transmissive mode.     

Alkylation of pyrazoles with alcohols over zeolites

HY zeolite is a highly active catalyst for the vapor-phase N-alkylation of pyrazoles with alcohols. For example, the reactions of pyrazole and 4-methylpyrazole with methanol over HY afford N-methylpyrazole and 1,4-dimethylpyrazole, respectively, in a 100% yield at 573 K. This revised version was published online in July 2006 with corrections to the Cover Date.