Microcavity distributed-feedback laser using dye-doped polymeric thin films

An organic microcavity laser, in which all the stacked polymer layers are doped with pyrromethene-567 dye, is presented. Singlemode laser oscillation at 568 nm was obtained that was located in the middle of the stopband. The lasing threshold was found to be 260 nJ/pulse, which corresponded to 300 muJ/cm² in the pulse energy density     

A 50-Gbit/s 450-mW Full-Rate 4:1 Multiplexer With Multiphase Clock Architecture in 0.13- μm InP HEMT Technology

A full-rate multiplexer (MUX) with a multiphase clock architecture for over 40 Gbit/s optical communication systems is presented. The 4:1 MUX is comprised of a re-timer based on a D-type flip-flop (DFF) and a clock tree system that uses EXOR-type delay buffers to match its skews well to those of the data. The supply voltage is reduced to -1.5 V by analyzing the voltage allocation. Fabricated in a 0.13-mum InP HEMT technology, a DFF test circuit achieved 75-Gbit/s operation and exhibited performance sufficient to re-time 50-Gbit/s serialized data. The 4:1 MUX measurement results demonstrate successful 50-Gbit/s operation at room temperature, and 40-Gbit/s operation, which has 10^-11 error free for 2³¹ - 1 pseudorandom bit stream (PRBS) data, up to an ambient temperature of 90 degrees or down to - 1.24 V of supply voltage. The circuit consumes 450 mW at a - 1.5-V supply and exhibits an output jitter of 283 fs rms at 50-Gbit/s operation. We also propose a multiphase clock generator for a MUX that has a serialization of more than four channels     

GPC Profile Change of Potato Starch with Extrusion Processing

Native potato starch (moisture content 15%) was treated by twin screw extruder under four operating conditions with varying barrel temperatures (110°C–230°C). These modified starch samples were compared to native and drum-dried starch. Starch sample solution for gel chromatography was prepared by the three methods (acidic, alkaline, and neutral methods). They were subjected to gel chromatography on Toyopearl HW-75, and some difference was found among the three gel chromatographic patterns obtained from the same starch solution. This discrepancy among GPC patterns suggests formation of some types of anhydro-bonds between chains of amylopectin and or amylose in the extrusion process. Elevating barrel temperature increases degree of depolymerization. The size of fragments formed with the treatment is bigger than that of oligosaccharides but smaller than that of amylose.     

Improved ADPCM voice signal transmission employing click-noisedetection scheme for TDMA-TDD personal communication systems

In personal communication systems, better voice quality and lower terminal price are essential requirements, and adaptive differential pulse-code modulation (ADPCM) codecs are one of the voice codec candidates that have good voice quality and reasonable cost. However, in slow fading environments, burst errors induce click noise in ADPCM voice signal transmission. This paper proposes a novel error-concealment scheme to improve the ADPCM voice signal transmission quality of time division multiple access time division duplex (TDMA-TDD) personal communication systems in slow fading environments. The proposed scheme employs an improved error-detection technique with PCM differential detection and overflow detection coupled with a cyclic redundancy check (CRC) code. To compensate for residual click noise, an expanded CRC error-detection signal is used. Erroneous PCM signals are adaptively suppressed according to the click-noise detection information. Hardware simulation results show that these techniques significantly improve ADPCM voice signal transmission quality by 0.5 points and 1.0 compared to that of the conventional ADPCM muting scheme and no processing, respectively, with the mean opinion scoring (MOS) test in the slow fading environments typical of personal communication systems     

Ultra-wideband optical amplification with 3 dB bandwidth of 65 nmusing a gain-equalised two-stage erbium-doped fibre amplifier and Ramanamplification

A 3 dB gain-reduction bandwidth up to 65 nm (1549-1614 nm) is achieved using a two-stage erbium-doped fibre amplifier, together with an intermediate equaliser and Raman amplification in the transmission fibre     

Development of a MAGLEV superconducting magnet for the Yamanashitest line in Japan: vibration characteristics and analysis for design

A high-performance and high-reliability magnetically levitated (MAGLEV) superconducting magnet (SCM) was developed. Its heat generation per unit time by the electromagnetic forces due to the spatially fifth ripple magnetic fields from levitation coils is under 2 W at the frequency range in which vehicles are levitated. The vibration mode of inner vessels that makes the largest contribution to heat generation in SCMs is clarified, the torsion mode. A modeling method to analyze SCM vibration, which considers the effect of the bogie frames of a vehicle, is examined, and heat generation in SCMs is calculated from the vibration of the inner vessel. Using the numerical analysis method, new SCMs combined with new bogie frames for the Yamanashi Test Line are designed. Good performance in vibration and heat generation of these SCMs is predicted by numerical analysis     

High-Speed TDM–WDM Techniques for Long-Haul Submarine Optical Amplifier Systems

Optical amplifier techniques have led to the installation of large-capacity submarine systems and further capacity increases seem likely. This paper reviews the FSA submarine system, which flexibly operates at both 2.5 and 10 Gb/s and offers maximum transmission capacity of 60 Gb/s for commercial use. The system configuration as well as its characteristics and upgradability will be introduced, including measurement results on time-division-multiplexing/wavelength-division-multiplexing (TDM–WDM) transmission at bit rates of 10 and 20 Gb/s using non-return-to-zero or soliton pulses. To further increase transmission capacity, TDM–WDM techniques that permit more than 10 Gb/s signal transmission in each data channel should be developed. Thus, pulse formats, which include non-return-to-zero, return-to-zero, or soliton pulses, and dispersion allocation in transmission fibers are significant issues. We introduce and discuss our recent results from high-speed (10 to 40 Gb/s) TDM–WDM signal transmission experiments with regard to the above aspects.     

An optically clocked transistor array with dual serial-to-parallel and parallel-to-serial conversion capability for optical label swapping

We propose an optically clocked transistor array optoelectronic integrated circuit (OEIC) for both serial-to-parallel and parallel-to-serial conversion (demux/mux), enabling an interface between high-speed asynchronous burst optical labels and CMOS circuitry for optical label swapping. Dual functionality of the OEIC reduces size, power, and cost of the optical label swapper. The capability for greater than 20-Gb/s conversion operation is demonstrated.     

10 Gbit/s, 1200 km error-free soliton data transmission using erbium-doped fibre amplifiers

Soliton data signals at 10 Gbit/s have been successfully transmitted for the first time through a 1200 km dispersion-shifted fibre by using 24 erbium-doped fibre amplifiers. A bit error rate below 10/sup -13/ was obtained with 2/sup 20/-1 pseudorandom patterns.<>     

A monolithic three-channel LD-PD array with vertically staggeredfacets for autofocusing reflectivity sensors

A monolithic three-channel LD-PD array with vertically staggered facets is proposed for an autofocusing reflectivity sensor which uses light feedback. The focus-sensing characteristics are investigated using an array with a radiation facet displacement of 12 μm and an interchannel distance of 130 μm, fabricated on an 830-nm AlGaAs/GaAs multiple-quantum-well laser substrate with buried-heterostructure stripe geometry waveguides. High focus-sensing accuracy is achieved. A potential application of the array to optical heads for phase change media is discussed