离散时间线性时变系统的传感器故障估计滤波器设计

针对一类离散时间线性时变系统提出了一种传感器故障诊断方法.本文首先通过状态增广的方式将被研究的系统转化为描述系统的形式,并且基于该描述系统模型,采用方差最小化原则设计了一种能够同时估计系统状态和传感器故障的故障估计滤波器,然后利用一组故障估计滤波器提出了一种故障诊断方法.本文的主要贡献在于针对离散线性时变系统提出了一种不需要对故障动态进行假设的传感器故障诊断方法.所提出方法的另一个优点是该方法能够在存在过程和测量噪声的情况下实现故障检测、分离与估计.仿真结果说明了所提出方法的有效性.     

Transparent Thin Films of Multiwalled Carbon Nanotubes Self‐Assembled on Polyamide 11 Nanofibers

Electrospun polyamide 11 (PA11) nanofiber films are used as a guide for the deposition of two‐dimensional networks of multi‐walled carbon nanotubes (MWNTs). This method allows for the manufacturing of transparent and electrically conductive thin films. It is demonstrated that the sheet resistance (Rs) and transmittance (T) decrease, as the films become thicker due to longer electrospinning times or larger fibers. The transmittance could be improved by fusing (melting) the fibers at moderate temperatures or impregnating the film with a resin, showing that light scattering rather than absorption by the MWNTs or the polymer was responsible for a low transmittance. As the number of MWNT deposition cycles increases, the Rs decreases with a constant transmittance. A fused 100 nm film obtained after 10 min of electrospinning of the 2 wt % PA11 solution shows Rs = 154 kΩ sq^?1 and T = 83% after ten MWNT deposition cycles. A 95% transmittance was achieved after removing the polymer fibers by heating the glass plate in air (Rs = 440 kΩ sq^?1 after five MWNT deposition cycles).     

Fractional-order Fourier analysis for ultrashort pulse characterization

We report what we believe to be the first experimental demonstration of ultrashort pulse characterization using fractional-order Fourier analysis. The analysis is applied to the interpretation of spectral interferometry resolved in time (SPIRIT) traces [which are spectral phase interferometry for direct electric field reconstruction (SPIDER)-like interferograms]. First, the fractional-order Fourier transformation is shown to naturally allow the determination of the cubic spectral phase coefficient of pulses to be analyzed. A simultaneous determination of both cubic and quadratic spectral phase coefficients of the pulses using the fractional-order Fourier series expansion is further demonstrated. This latter technique consists of localizing relative maxima in a 2D cartography representing decomposition coefficients. It is further used to reconstruct or filter SPIRIT traces.     

On the effects of reflected waves in transient shear wave elastography

In recent years, novel quantitative techniques have been developed to provide noninvasive and quantitative stiffness images based on shear wave propagation. Using radiation force and ultrafast ultrasound imaging, the supersonic shear imaging technique allows one to remotely generate and follow a transient plane shear wave propagating in vivo in real time. The tissue shear modulus, i.e., its stiffness, can then be estimated from the shear wave local velocity. However, because the local shear wave velocity is estimated using a time-of- flight approach, reflected shear waves can cause artifacts in the estimated shear velocity because the incident and reflected waves propagate in opposite directions. Such effects have been reported in the literature as a potential drawback of elastography techniques based on shear wave speed, particularly in the case of high stiffness contrasts, such as in atherosclerotic plaque or stiff lesions. In this letter, we present our implementation of a simple directional filter, previously used for magnetic resonance elastography, which separates the forward- and backward-propagating waves to solve this problem. Such a directional filter could be applied to many elastography techniques based on the local estimation of shear wave speed propagation, such as acoustic radiation force imaging (ARFI), shearwave dispersion ultrasound vibrometry (SDUV), needle-based elastography, harmonic motion imaging, or crawling waves when the local propagation direction is known and high-resolution spatial and temporal data are acquired.