A Systematic Study of Restorative Crown-Materials Combinations for Dental Implants: Characterization of Mechanical Properties under Dynamic Loads

This study aimed to find the optimum mechanical characteristics of the restorative materials for the manufacture of implant crowns subjected to impact loading when different combinations of materials are used for the inner and outer crown. Several combinations of external–internal crown restorative materials were analyzed. The dynamic stresses at eight different zones of a dental implant subjected to an impact load and the influence of several mechanical properties, such as the Young’s modulus, Poisson’s ratio, density, and initial velocity, were analyzed and compared. A detailed 3D model was created, including the crown, the retention screw, the implant, and a mandible section. The model was then built by importing the 3D geometries from CAD software. The whole 3D model was carefully created in order to guarantee a finite element mesh that produced results adjusted to physical reality. Then, we conducted a numerical simulation using the finite element method (FEM). The results of the FEM analysis allowed for evaluating the effect that different combinations of restorative materials and mechanical properties had on the stress distribution in various regions of the implant. The choice of restorative material is a factor to be considered in order to preserve the integrity of osseointegration. Restorative materials transfer more or less stress to the dental implant and surrounding bone, depending on their stiffness. Therefore, an inadequate Young’s modulus of the rehabilitation material can affect the survival of the implant over time. Eight interactive graphics were provided on a web-based surface platform to help clinical dentists, researchers, and manufacturers to select the best restorative materials combination for the crown.     

Improving the Management of Endometrial Cancer Patients through the Use of Liquid Biopsy Analyses: A Case Report

Endometrial cancer (EC) is the 4th most common neoplasm of the female genital tract, with 15–20% of patients being of high risk of recurrence which leads to a significant decrease in patient survival. Current therapeutic options for patients with EC are poor, being the combined therapy of carboplatin and paclitaxel the standard of care, with limited efficacy. Therefore, new therapeutic options and better monitoring tools are needed to improve the management of the disease. In the current case report, we showcase the value of liquid biopsy analyses in a microsatellite instability EC patient with initially good prognosis that however underwent rapid progression disease within 6 months post-surgery; through the study of plasma cfDNA/ctDNA dynamics to assess the tumour evolution during treatment, as well as the study of the uterine aspirate as a valuable sample that captures the intra-tumour heterogeneity that allows a comprehensive genomic profiling of the disease to identify potential therapeutic options. Furthermore, preclinical models were generated at the time of tumour progression to assess the efficacy of the identified targeted therapies.     

Industrial application integration using the unification approach to agent-enabled semantic SOA

Within the enterprise, information infrastructure as the mean to bring together different software applications is the key component to enable cooperation and information and knowledge exchange in an open-distributed environment. The paper addresses the issues of industrial application integration in business processes using agent-enabled service-oriented architectures (SOA). In this paper, we show that agent-enabled SOA can play an important role for service integration. Our framework combines Web services (WS) and intelligent agent technologies orchestrated by a business process management system. This framework looks for unification of agent and WS service models, is grounded in a semantic SOA of an agent platform and is supported by the Component Agent Platform Over .NET Framework agent platform tools. We describe the architecture and illustrate the approach by an industrial application scenario from petroleum wells’ drilling.     

Random 3-SAT: The Plot Thickens

This paper presents an experimental investigation of the following questions: how does the average-case complexity of random 3-SAT, understood as a function of the order (number of variables) for fixed density (ratio of number of clauses to order) instances, depend on the density? Is there a phase transition in which the complexity shifts from polynomial to exponential in the order? Is the transition dependent or independent of the solver? Our experiment design uses three complete SAT solvers embodying different algorithms: GRASP, CPLEX, and CUDD. We observe new phase transitions for all three solvers, where the median running time shifts from polynomial in the order to exponential. The location of the phase transition appears to be solver-dependent. GRASP shifts from polynomial to exponential complexity near the density of 3.8, CPLEX shifts near density 3, while CUDD exhibits this transition between densities of 0.1 and 0.5. This experimental result underscores the dependence between the solver and the complexity phase transition, and challenges the widely held belief that random 3-SAT exhibits a phase transition in computational complexity very close to the crossover point.     

Matisse: A System-on-Chip Design Methodology Emphasizing Dynamic Memory Management

MATISSE is a design environment intended for developing systems characterized by a tight interaction between control and data-flow behavior, intensive data storage and transfer, and stringent real-time requirements. Matisse bridges the gap from a system specification, using a concurrent object-oriented language, to an optimized embedded single-chip hardware/software implementation. Matisse supports stepwise exploration and refinement of dynamic memory management, memory architecture exploration, and gradual incorporation of timing constraints before going to traditional tools for hardware synthesis, software compilation, and inter-processor communication synthesis. With this approach, specifications of embedded systems can be written in a high-level programming language using data abstraction. Application of MATISSE on telecom protocol processing systems in the ATM area shows significant improvements in area usage and power consumption.     

Turn-on jitter of external-cavity semiconductor lasers

Analytical expressions, validated by numerical simulations, are obtained for the turn-on delay jitter of semiconductor lasers subjected to weak optical feedback in short external cavities. The results show explicitly that displacement of the external reflector on optical wavelength scales causes significant changes in the switch-on dynamics of the laser. It is found that more than a 400% increase of jitter can occur under certain circumstances. The demonstrated sensitivity of laser switch-on dynamics to reflector location is considered to be particularly relevant to the performance of packaged laser diodes     

Comparison of Biological Features of Wild European Rabbit Mesenchymal Stem Cells Derived from Different Tissues

Although the European rabbit is an “endangered” species and a notorious biological model, the analysis and comparative characterization of new tissue sources of rabbit mesenchymal stem cells (rMSCs) have not been well addressed. Here, we report for the first time the isolation and characterization of rMSCs derived from an animal belonging to a natural rabbit population within the native region of the species. New rMSC lines were isolated from different tissues: oral mucosa (rOM-MSC), dermal skin (rDS-MSC), subcutaneous adipose tissue (rSCA-MSC), ovarian adipose tissue (rOA-MSC), oviduct (rO-MSC), and mammary gland (rMG-MSC). The six rMSC lines showed plastic adhesion with fibroblast-like morphology and were all shown to be positive for CD44 and CD29 expression (characteristic markers of MSCs), and negative for CD34 or CD45 expression. In terms of pluripotency features, all rMSC lines expressed NANOG, OCT4, and SOX2. Furthermore, all rMSC lines cultured under osteogenic, chondrogenic, and adipogenic conditions showed differentiation capacity. In conclusion, this study describes the isolation and characterization of new rabbit cell lines from different tissue origins, with a clear mesenchymal pattern. We show that rMSC do not exhibit differences in terms of morphological features, expression of the cell surface, and intracellular markers of pluripotency and in vitro differentiation capacities, attributable to their tissue of origin.