CMOS harmonic upconverter with power management of $$2{\bf nd}$$ harmonic for wideband short-range communications

The design and simulation of a 2nd harmonic based upconverter is introduced. With the proposed upconverter, it is possible to reach a good noise figure with power and area reduction. The design of the circuit was made with the UMC \(0.18\,\upmu \hbox {m}\) Mixed Mode/RF CMOS technology. However, the design methodology can be extended to a different CMOS process. According to the performance exhibited by the purposed mixer, it may be useful in wideband short-range communication technologies, such as certified wireless USB.     

Near-lossless and lossy compression of imaging spectrometer data: comparison of information extraction performance

We investigate the ability to derive meaningful information from decompressed imaging spectrometer data. Hyperspectral images are compressed with near-lossless and lossy coding methods. Linear prediction between the bands is used in both cases. Each band is predicted by a previously transmitted band. The residual is formed by subtracting the prediction from the original data and then is compressed either with a near-lossless bit-plane coder or with the lossy JPEG2000 algorithm. We study the effects of these two types of compression on hyperspectral image processing such as mineral and vegetation content classification using whole- and mixed pixel analysis techniques. The results presented in this paper indicate that an efficient lossy coder outperforms near-lossless method in terms of its impact on final hyperspectral data applications.     

Modern development methods and tools for embedded reconfigurable systems: A survey

Heterogeneous reconfigurable systems provide drastically higher performance and lower power consumption than traditional CPU-centric systems. Moreover, they do it at much lower costs and shorter times to market than non-reconfigurable hardware solutions. They also provide the flexibility that is often required for the engineering of modern robust and adaptive systems. Due to their heterogeneity, flexibility and potential for highly optimized application-specific instantiation, reconfigurable systems are adequate for a very broad class of applications across different industry sectors. What prevents the reconfigurable system paradigm from a broad proliferation is the lack of adequate development methodologies and electronics design tools for this kind of systems. The ideal would be a seamless compilation of a high-level computation process specification into an optimized mixture of machine code executed on traditional CPU-centric processors and on the application-specific decentralized parallel data-flow-dominated reconfigurable processors and hardware accelerators. Although much research and development in this direction was recently performed, the adequate methodologies and tools necessary to implement this compilation process as an effective and efficient hardware/software co-synthesis flow are unfortunately not yet in place. This paper focuses on the recent developments and development trends in the design methods and synthesis tools for reconfigurable systems. Reconfigurable system synthesis performs two basic tasks: system structure construction and application process mapping on the structure. It is thus more complex than standard (multi-)processor-based system synthesis for software-programmable systems that only involves application mapping. The system structure construction may involve the macro-architecture synthesis, the micro-architecture synthesis, and the actual hardware synthesis. Also, the application process mapping can be more complicated and dynamic in reconfigurable systems. This paper reviews the recent methods and tools for the macro- and micro-architecture synthesis, and for the application mapping of reconfigurable systems. It puts much attention to the relevant and currently hot topic of (re-)configurable application-specific instruction set processors (ASIP) synthesis, and specifically, ASIP instruction set extension. It also discusses the methods and tools for reconfigurable systems involving CPU-centric processors collaborating with reconfigurable hardware sub-systems, for which the main problem is to decide which computation processes should be implemented in software and which in hardware, but the hardware/software partitioning has to account for the hardware sharing by different computation processes and for the reconfiguration processes. The reconfigurable system area is a very promising, but quite a new field, with many open research and development topics. The paper reviews some of the future trends in the reconfigurable system development methods and tools. Finally, the discussion of the paper is summarized and concluded.     

The muscle activation method: an approach to impedance control of brain-machine interfaces through a musculoskeletal model of the arm

Current demonstrations of brain-machine interfaces (BMIs) have shown the potential for controlling neuroprostheses under pure motion control. For interaction with objects, however, pure motion control lacks the information required for versatile manipulation. This paper investigates the idea of applying impedance control in a BMI system. An extraction algorithm incorporating a musculoskeletal arm model was developed for this purpose. The new algorithm, called the muscle activation method (MAM), was tested on cortical recordings from a behaving monkey. The MAM was found to predict motion parameters with as much accuracy as a linear filter. Furthermore, it successfully predicted limb interactions with novel force fields, which is a new and significant capability lacking in other algorithms.     

A novel CMOS exponential transconductor operating in weak inversion

A novel CMOS exponential transconductor which employs only three NMOS transistors operating in weak inversion, is presented. The main advantage of the proposed circuit is its wide range of exponential behaviour, which reaches up to five decades of current range, and above 10 μA to an input voltage range of 800 mV. The physical realisation is achieved in two forms: in the first one, the circuit is implemented with discrete MOS transistor arrays by CD4007 series; in the second one, the circuit is fully integrated in a 0.5 μm CMOS standard process. Simulated and experimental results of the proposed exponential transconductor are also presented.     

Properties and Printability of Inkjet and Screen-Printed Silver Patterns for RFID Antennas

We report the modeling, and geometrical and electrical characterization, of inkjet and screen-printed patterns on different polymeric substrates for use as antennas in radio-frequency identification (RFID) applications. We compared the physical and electrical characteristics of two silver nanoparticle-based commercial inkjet-printable inks and one screen-printable silver paste, when deposited on polyimide (PI), polyethylene terephthalate (PET), and polyetherimide (PEI) substrates. First, the thickness of the inkjet-printed patterns was predicted by use of an analytical model based on printing conditions and ink composition. The predicted thickness was confirmed experimentally, and geometrical characterization of the lines was completed by measuring the root-mean-square roughness of the patterns. Second, direct-current electrical characterization was performed to identify the printing conditions yielding the lowest resistivity and sheet resistance. The minimum resistivity for the inkjet-printing method was 8.6 ± 0.8 μΩ cm, obtained by printing four stacked layers of one of the commercial inks on PEI, whereas minimum resistivity of 44 ± 7 μΩ cm and 39 ± 4 μΩ cm were obtained for a single layer of screen-printed ink on polyimide (PI) with 140 threads/cm mesh and 90 threads/cm mesh, respectively. In every case, these minimum values of resistivity were obtained for the largest tested thickness. Coplanar waveguide transmission lines were then designed and characterized to analyze the radio-frequency (RF) performance of the printed patterns; minimum transmission losses of 0.0022 ± 0.0012 dB/mm and 0.0016 ± 0.0012 dB/mm measured at 13.56 MHz, in the high-frequency (HF) band, were achieved by inkjet printing on PEI and screen printing on PI, respectively. At 868 MHz, in the ultra-high-frequency band, the minimum values of transmission loss were 0.0130 ± 0.0014 dB/mm for inkjet printing on PEI and 0.0100 ± 0.0014 dB/mm for screen printing on PI. Although the resistivity achieved is lower for inkjet printing than for screen printing, RF losses for inkjetted patterns were larger than for screen-printed patterns, because thicker layers were obtained by screen printing. Finally, several coil inductors for the HF band were also fabricated by use of both printing techniques, and were used as antennas for semi-passive smart RFID tags on plastic foil capable of measuring temperature and humidity.     

Effects of JPEG2000 data compression on an automated system for detecting clustered microcalcifications in digital mammograms.

The functionalities of the JPEG2000 standard have led to its incorporation into digital imaging and communications in medicine (DICOM), which makes this compression method available for medical systems. In this study, we evaluated the compression of mammographic images with JPEG2000 (16 : 1, 20 : 1, 40 : 1, 60.4 : 1, 80: 1, and 106 : 1) for applications with a computer-aided detection (CAD) system for clusters of microcalcifications. Jackknife free-response receiver operating characteristic (JAFROC) analysis indicated that differences in the detection of clusters of microcalcifications were not statistically significant for uncompressed versus 16: 1 (T = -0.7780; p = 0.4370), 20 : 1 (T = 1.0361; p = 0.3007), and 40 : 1 (T = 1.6966; p = 0.0904); and statistically significant for uncompressed versus 60.4 : 1 (T = 5.8883; p < 0.008), 80 : 1 (T = 7.8414; p < 0.008), and 106 : 1 (T = 17.5034; p = < 0.008). Although there is a small difference in peak signal-to-noise ratio (PSNR) between compression ratios, the true-positive (TP) and false-positive (FP) rates, and the free-response receiver operating characteristic (FROC), figure of merit values considerably decreased from a 60 : 1 compression ratio. The performance of the CAD system is significantly reduced when using images compressed at ratios greater than 40 : 1 with JPEG2000 compared to uncompressed images. Mammographic images compressed up to 20 : 1 provide a percentage of correct detections by our CAD system similar to uncompressed images, regardless of the characteristics of the cluster. Further investigation is required to determine how JPEG2000 affects the detectability of clusters of microcalcifications as a function of their characteristics.     

A practical approach to electrode-skin impedance unbalance measurement

Unbalance between electrode-skin impedances is a major problem in biopotential recordings, leading to increased power-line interference. This paper proposes a simple, direct method to measure that unbalance at power-line frequency (50-60 Hz), thus allowing the determination of actual recording conditions for biopotential amplifiers. The method is useful in research, amplifier testing, electrode design and teaching purposes. It has been experimentally validated by using both phantom impedances and real electrode-skin impedances.