Mechanical and thermal characterization of compression moulded polylactic acid natural fiber composites reinforced with hemp and lyocell fibers

This research evaluates the effects of PLA/PP blend ratio and Lyocell/hemp mixture ratio on the morphology, water absorption, mechanical and thermal properties of PLA‐based composites. The composites were fabricated with 30 mass % hemp using compression moulding. As a reference composites made from PP were also studied. Combining of hemp and Lyocell in PLA composite leads to the reduction of moisture absorption and can improve the impact, tensile, flexural properties when compared with PLA/hemp. Composite based on the PLA/PP blend‐matrix could not improve the tensile and flexural properties compared with PLA/hemp, however; the lighter composite with better impact properties was obtained. The crystallization temperature of the PLA‐PP/hemp increased compared with pure PLA. This result was also confirmed by the SEM micrographs. The moisture absorption of PLA‐PP/hemp was higher than PLA/hemp. Based on theoretical analysis of DMTA data, there was favorable adhesion in all composites. © 2014 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2014 , 131, 40534.     

CFD study of non-premixed swirling burners: Effect of turbulence models

This research investigates a numerical simulation of swirling turbulent non-premixed combustion. The effects on the combustion characteristics are examined with three turbulence models: namely as the Reynolds stress model, spectral turbulence analysis and Re-Normalization Group. In addition, the P-1 and discrete ordinate (DO) models are used to simulate the radiative heat transfer in this model. The governing equations associated with the required boundary conditions are solved using the numerical model. The accuracy of this model is validated with the published experimental data and the comparison elucidates that there is a reasonable agreement between the obtained values from this model and the corresponding experimental quantities. Among different models proposed in this research, the Reynolds stress model with the Probability Density Function (PDF) approach is more accurate (nearly up to 50%) than other turbulent models for a swirling flow field. Regarding the effect of radiative heat transfer model, it is observed that the discrete ordinate model is more precise than the P-1 model in anticipating the experimental behavior. This model is able to simulate the subcritical nature of the isothermal flow as well as the size and shape of the internal recirculation induced by the swirl due to combustion.     

Effects of a titanate coupling agent on the mechanical and thermo‐physical properties of talc‐reinforced polyethylene compounds

An experimental study was carried out to investigate the effects of a titanate coupling agent on the mechanical properties, moisture absorption, and thermal conductivity of talc‐filled high‐density polyethylene (HDPE). Talc (0–35 wt %) was used as reinforcement particulate filler in an HDPE matrix and samples were prepared in a micro‐compounder and an injection molding machine. Isopropyl tri(dioctyl)phosphate titanate (0.5 wt %) was used as coupling agent. Composites with and without coupling agent were evaluated for changes in mechanical and thermo‐physical properties, morphology, and void content. Addition of the titanate coupling agent most often resulted in an increase in stiffness and tensile strength. Furthermore, both the void content and the elongation at break of composites were reduced. Results also showed that the coupling agent had no effects on the thermal conductivity, thermal diffusivity, and specific heat capacity of the composites. In addition, it was observed that the coupling agent was more effective at low concentrations of filler. © 2014 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2014 , 131, 40449.     

Erosion—corrosion characteristics of a 2.25 Cr-1 Mo steel exposed at low particle velocities

The erosion-corrosion characteristics of a 2.25 Cr-1 Mo steel at low particle velocities and elevated temperatures were determined using a nozzle type laboratory erosion tester. The tests were performed with 180–360 μm angular alumina particles at 60° angle of impingement at low particle velocities of 2.6–8.2 m/s and in the temperature interval 20–600°C. The steel was tested both in the as-received condition as well as in two preoxidized conditions. The erosion-corrosion rate of the steel, both in the as-received and in the preoxidized conditions, was found to increase with increasing particle velocity. In contrast, the wastage rates were relatively independent of temperature in the temperature range investigated, the only exception being specimens exposed to the lowest particle velocity (2.6 m/s) at the very highest temperature, i.e. 600°C, which displayed a drastic increase in wastage. Specimens preoxidized at 700°C exhibited a somewhat higher erosion rate compared with non-preoxidized specimens and specimens preoxidized at 500°C. Microscopy revealed four different major wastage mechanisms, i.e. (i) plastic deformation, cracking and micro chipping of surface material of a size corresponding to the area impinged by eroding particles, (ii) chipping of somewhat larger oxide fragments (up to 10–15 μm in diameter), (iii) chipping or spalling of relatively large oxide fragments (up to 30–50 μm in diameter), and (iv) spalling along the steel-oxide interface or within an oxide layer due to cohesive failure, of larger (up to 500 μm in diameter) oxide layer fragments. In the present study extensive spalling was only observed for non-preoxidized specimens exposed to the lowest particle velocity (2.6 m/s) and the two highest specimen temperatures (550°C and 600°C).     

CAD standardisation in the construction industry — A process view

There has been a demand for uniform CAD standards in the construction industry ever since the large-scale introduction of computer aided design systems in the late 1980s. While some standards have been widely adopted without much formal effort, other standards have failed to gain support even though considerable resources have been allocated for the purpose. Establishing a standard concerning building information modeling has been one particularly active area of industry development and scientific interest within recent years. In this paper, four different standards are discussed as cases: the IGES and DXF/DWG standards for representing the graphics in 2D drawings, the ISO 13567 standard for the structuring of building information on layers, and the IFC standard for building product models. Based on a literature study combined with two qualitative interview studies with domain experts, a process model is proposed to describe and interpret the contrasting histories of past CAD standardisation processes.     

CAVE for collaborative patient room design: analysis with end-user opinion contrasting method

Several studies indicate that virtual reality (VR) systems are useful for end-user participation in an environmental design process. However, these systems can be costly and thus support for the decision whether to invest in a VR of some type is useful. This study presents a novel method for analysing the usefulness of a VR system for the purpose of end-user participation. We collected qualitative end-user opinion data in the real environment and then contrasted this data with the capabilities of a VR system. Additionally, to better understand the capabilities of the VR used, we examined how the end-users perceive the used virtual environment, which in this case was CAVE, an immersive VR system where projectors are directed to the walls of a room-sized cube. In this way, we analysed whether the same functions and elements identified by end-users on the actual wards could also be evaluated in the CAVE. Eleven nurses and 11 patients participated in the study by evaluating a bathroom and/or four patient rooms modelled by the CAVE and the actual hospital wards. The CAVE was convenient for evaluating most issues identified by the study participants in the actual hospital wards, i.e. aesthetics; correct location of equipment, supplies and materials; distraction by or the good companion of other patients as well as window position and size and living/workspace. However, it was not possible to evaluate with full certainty the possibilities for bracing against grab bars or other objects in the VR, and this was found to be relevant to the independent functioning of patients with limited mobility. Also, due to the relatively low luminance levels of projectors, evaluations regarding lighting were considered unreliable. Moreover, end-users were not always certain about the sizes and sufficiency of space in the CAVE. Solutions to overcome these limitations were proposed.     

Derivation of the conditional moment closure equations for spray combustion

In this work we derive the fundamental equations for conditional moment closure (CMC) modelling of individual phases set in a two-phase flow. The derivation is based on the instantaneous transport equations for the single phase that involve a level set/indicator function technique for accounting for interfaces. Special emphasis is put on spray combustion with the CMC equations formulated for the gas phase. The CMC equations are to be viewed as an adjunct to existing methods for the modelling of the dynamics of sprays: they provide a refinement of the modelling of chemical reactions in the gas phase. The resulting CMC equations differ significantly from those already in use in the literature. They contain, of course, unclosed terms that need to be modelled. Investigation of the unclosed terms associated with evaporation at the droplet surface is well beyond the capabilities of laboratory measurement or direct numerical simulation. It is proposed that modelling of these terms be based on the well-established ‘laws’ of similarity between heat and mass transfer: an example is detailed for one example of the general modelling of the spray dynamics. Other unclosed terms are important throughout the gas phase. Models used for these terms in single-phase flows are reviewed and it is proposed that any modifications needed for these models be investigated by DNS of suitable model problems having good resolution of the flow and mixing in the inter-droplet space. It is proposed that a spray analogue of the scalar mixing layer that has been widely studied in single-phase flows be used as the model problem for such DNS studies and also for LES and RANS modelling.     

Does sodium fluoride in bone cement affect implant fixation? Part I: Bone tissue response, implant fixation and histology in nine rabbits

The addition of sodium fluoride to poly (methyl-methacrylate) (PMMA) bone cement may theoretically improve the fixation of joint replacement. This hypothesis was tested in an animal model using nine mature healthy lop-eared rabbits. A femoral prosthesis was inserted in both knees to resurface the patellofemoral articulation. The same acrylic cement, with and without sodium fluoride, was randomised between the two sides for prosthetic fixation. Two screw shaped implants machined from cured rods of either cement were also inserted bilaterally into the proximal tibia. Qualitative and quantitative histomorphometry of the bone tissue response surrounding the cement in the femur and the intact tibial implants revealed similar results regardless of sodium fluoride addition. Six weeks after surgery removal, torque did not significantly differ between the two sides. Our findings indicate that addition of sodium fluoride to PMMA has little effect on implant stability and bone remodeling in rabbits in the short-term.