Atomic layer deposition of calcium oxide and calcium hafnium oxide films using calcium cyclopentadienyl precursor

Calcium oxide and calcium hafnium oxide thin films were grown by atomic layer deposition on borosilicate glass and silicon substrates in the temperature range of 205–300 °C. The calcium oxide films were grown from novel calcium cyclopentadienyl precursor and water. Calcium oxide films possessed refractive index 1.75–1.80. Calcium oxide films grown without Al₂O₃ capping layer occurred hygroscopic and converted to Ca(OH)₂ after exposure to air. As-deposited CaO films were (200)-oriented. CaO covered with Al₂O₃ capping layers contained relatively low amounts of hydrogen and re-oriented into (111) direction upon annealing at 900 °C. In order to examine the application of CaO in high-permittivity dielectric layers, mixtures of Ca and Hf oxides were grown by alternate CaO and HfO₂ growth cycles at 230 and 300 °C. HfCl₄ was used as a hafnium precursor. When grown at 230 °C, the films were amorphous with equal amounts of Ca and Hf constituents (15 at.%). These films crystallized upon annealing at 750 °C, showing X-ray diffraction peaks characteristic of hafnium-rich phases such as Ca₂Hf₇O₁₆ or Ca₆Hf₁₉O₄₄. At 300 °C, the relative Ca content remained below 8 at.%. The crystallized phase well matched with rhombohedral Ca₂Hf₇O₁₆. The dielectric films grown on Si(100) substrates possessed effective permittivity values in the range of 12.8–14.2.     

Hardware Cost Measurement of Lightweight Security Protocols

The feasibility of security solution for RFID tags relies heavily on its hardware cost and performance. In the literature the term lightweight solution is used liberally and causes problems when selecting a solution for e.g. RFID environment. Evaluating the actually feasibility of the solution requires electrical engineering skills that many security developers and decision makers may lack. In this paper we describe simple guidelines for approximating the feasibility of the security solution in terms of gates and clock cycles. These guidelines make it easier to evaluate the cryptographic solutions feasibility for targeted hardware and provide a basis for categorisation of lightweight security solutions.     

Influence of thickness and growth temperature on the properties of zirconium oxide films grown by atomic layer deposition on silicon

ZrO₂ films of thicknesses varied in the range of 3–30 nm were atomic layer deposited from ZrI₄ and H₂O–H₂O₂ on p-Si(100) substrates. The effects of film thickness and deposition temperature on the structure and dielectric properties of ZrO₂ were investigated. At 272 and 325 °C, the growth of ZrO₂ started with the formation of the cubic polymorph and continued with the formation of the tetragonal polymorph. The ratio between the lattice parameters increased with the film thickness and growth temperature. The effective permittivity, determined from the accumulation capacitance of Hg/ZrO₂/Si capacitors, increased with the film thickness, reaching 15–17 in 25-nm-thick films. The permittivity decreased with the increasing growth temperature. The hysteresis of the capacitance–voltage curves was the narrowest for the films deposited at 325 °C, and increased towards both lower and higher deposition temperatures.     

Inhomogeneous compression of PEMFC gas diffusion layer: Part I. Experimental

This paper presents a study on the effect of inhomogeneous compression of gas diffusion layer (GDL) caused by the channel/rib structure of flow-field plate. The experimentally evaluated properties are GDL intrusion into the channel, gas permeability, in-plane and through-plane bulk electric conductivities, and contact resistances at interfaces as a function of compressed thickness of GDL. It was found that the GDL is compressed very little under the channel whereas GDL under the rib is compressed to gasket thickness. The compression of GDL reduces gas permeability and contact resistance, and improves bulk conductivity. Hence, the inhomogeneous compression of GDL may lead into significant local variation of mass and charge transport properties in the GDL. These effects have been ignored in most of the published modeling studies. This contribution, part I, covers the experimental setup and measurement results, and a model which takes the inhomogeneous compression of GDL into account is presented in part II.     

Advances in Digital Front-End and Software RF Processing:Part I

One of the biggest technology trends in wirelessbroadband, radar, sonar, and broadcasting systems issoftware radio frequency processing and digitalfront-end. This trend encompasses a broad range oftopics, from circuit design and signal processing to systemintegration. It includes digital up-conversion (DUC) and     

High-precision diode-laser-based temperature measurement for air refractive index compensation

We present a laser-based system to measure the refractive index of air over a long path length. In optical distance measurements, it is essential to know the refractive index of air with high accuracy. Commonly, the refractive index of air is calculated from the properties of the ambient air using either Ciddor or Edlén equations, where the dominant uncertainty component is in most cases the air temperature. The method developed in this work utilizes direct absorption spectroscopy of oxygen to measure the average temperature of air and of water vapor to measure relative humidity. The method allows measurement of temperature and humidity over the same beam path as in optical distance measurement, providing spatially well-matching data. Indoor and outdoor measurements demonstrate the effectiveness of the method. In particular, we demonstrate an effective compensation of the refractive index of air in an interferometric length measurement at a time-variant and spatially nonhomogeneous temperature over a long time period. Further, we were able to demonstrate 7 mK RMS noise over a 67 m path length using a 120 s sample time. To our knowledge, this is the best temperature precision reported for a spectroscopic temperature measurement.     

Mixed preconditioners for harmonic balance Jacobians

Preconditioning is crucial for the convergence of GMRES iteration in the Harmonic Balance analysis of RF and microwave circuits. In this article, mixed frequency/time‐domain preconditioners for harmonic balance Jacobians are presented. The efficiency of mixed preconditioners is demonstrated with realistic simulation examples. © 2008 Wiley Periodicals, Inc. Int J RF and Microwave CAE, 2009.     

Dynamical modelling of peak-current-mode-controlled converter in continuous conduction mode

Peak-current-mode (PCM) control has been a popular control method of switched-mode converters since its publication in late 1970s due to the inherent features it provides especially in buck derived converters such as high input-noise attenuation, first-order control dynamics as well as cycle-by-cycle current limiting. Its main disadvantages are considered to be the limited duty ratio, increased output impedance, and noise sensitivity due to the fast feedback-current loop. The observed peculiar dynamical behaviour associate to the PCM control has attracted the researchers for tens of years yielding multitude of dynamical modelling approaches. Application of sampling effect as the basis for the modelling has been considered to producing most accurate dynamical models as well as explanations for the observed phenomena. A consistent and easy-to-apply modelling approach is presented in this paper, which explains the observed dynamical phenomena, provides accurate dynamical power-stage models as well as comply with the other methods proposing the existence of an infinite small-signal duty-ratio gain leading to the observed behaviour. Experimental evidence is provided based on second and fourth-order buck converters.     

Momentum and recoil-flux anisotropies in collision-cascades: Influence on sputtered particle angular distributions

The anisotropy in the spatial distributions of recoil-flux and recoil-momentum have been studied by Monte Carlo simulation for the specific case of amorphous germanium bombarded with Ar⁺ ions. For all the energies investigated, (1.25 to 320 keV) both the recoil-flux and momentum-flux distributions are strongly backwards directed at the surface, becoming forwards directed at greater depths. Further the angular distributions are (relatively) insensitive to the choice of interatomic potential. The calculations show that the backwards-directedness of sputtered particle angular distributions may be completely explained by the anisotropy in the recoil flux. It is also demonstrated that the adoption of more realistic surface models, than the usual infinite target approximation does not lead to significant changes in the angular distribution of recoil-, momentum- and sputtered particle-fluxes.     

Red clover (Trifolium pratense L.) isoflavones: determination of concentrations by plant stage,flower colour,plant part and cultivar

BACKGROUND: Red clover (Trifolium pratense L.), a widely used fodder, has recently received considerable interest as a valuable source of isoflavones for many health‐related applications. The aim of this study was to analyse the concentrations of four isoflavones, daidzein, genistein, formononetin and biochanin A, in extracts of leaves, stems, roots and different coloured flowers from red clover by high‐performance liquid chromatography and to determine the antifungal activities of the extracts. RESULTS: Among greenhouse‐grown samples the highest amounts of daidzein and genistein were found in petioles (0.11–0.28 and 0.30–0.54 mg g^?1 respectively), while leaves were rich in formononetin and biochanin A (5.57–9.05 and 10.94–14.59 mg g^?1 respectively). High formononetin concentrations were found in roots, but very little biochanin A. Among field‐grown samples the highest concentrations of daidzein and genistein were detected in stems collected in August (0.24 and 0.55 mg g^?1 respectively), while the highest amounts of formononetin and biochanin A were found in young leaves collected in June (7.47 and 9.69 mg g^?1 respectively). Most of the extracts inhibited the growth of Drechslera teres, while the root extract showed the strongest effect against Microdochium nivale. CONCLUSION: High levels of bioactive compounds found not only in inflorescences but also in roots, leaves and stems suggest that red clover may be an inexpensive and valuable resource for many applications. Copyright © 2007 Society of Chemical Industry