Safety of intrauterine contraceptive devices during MR imaging

OBJECTIVE: We report a case of candidiasis of the upper urinary tract that presented as acute renal failure associated with septic syndrome. The patient initially required hemodialysis. Right hydronephrosis and perirenal collection were observed on ultrasound examination. METHODS: A percutaneous nephrostomy was performed. Nephrostomy urine cytology and cultures were positive for Candida tropicalis. An anterograde pyelography showed a 'fungus ball' in the urinary tract. RESULTS: Therapy with oral fluconazole and percutaneous amphotericin B achieved excellent results. CONCLUSIONS: Candidiasic urinary infection of the upper urinary tract often produces obstructive uropathy requiring percutaneous nephrostomy, which can also be used to instill amphotericin B. Combination therapy with amphotericin B and fluconazole can achieve excellent results.     

Controlled oxygen incorporation in indium gallium arsenide and indium phosphide grown by metalorganic vapor phase epitaxy

The defect engineering in metalorganic vapor phase epitaxy In_xGa_1-xAs and InP by controlled oxygen doping using diethyl aluminum ethoxide (DEALO) was developed in this study. DEALO doping has led to the incorporation of Al and O, and the compensation of shallow Si donors in In_xGa_1−xAs: Si with 0 ≤ x ≤ 0.25. With the same DEALO mole fraction during growth, the incorporation of Al and O was found to be independent of x, but the compensation of Si donors decreases with increasing In content. Deep level transient spectroscopy analysis on a series of In_xGa_1-xAs: Si. samples with 0 ≤ x ≤ 0.18 revealed that oxygen incorporation led to a set of deep levels, similar to those found in DEALO doped GaAs. As the In composition was increased, one or more of these deep levels became resonant with the conduction band and led to a high electron concentration in oxygen doped In_0.53Ga_0.47As. Low temperature photoluminescence emission measurements at 12K on the same set of samples revealed the quenching of the near-band edge peak, and the appearance of new oxygen-induced emission features. DEALO doping in InP has also led to the incorporation of Al and O, and the compensation of Si donors due to oxygen-induced multiple deep levels.     

Distributed channel assignment strategies using coexistenceetiquettes for land based radio environment

The performance of two distributed channel assignment algorithms which use coexistence etiquettes for point to point links are considered by the authors. It has been found that selecting channels prior to transmission at the transmitter as opposed to the receiver, supports greater offered traffic with the additional advantage of a less complex protocol     

Evidence for a non-thermal microwave effect in the sintering of partially stabilized zirconia

A hybrid furnace, which allows the simultaneous application of microwave and radiant energy, has been used to investigate the sintering of partially stabilized zirconia (doped with 3 mol % yttria). Microwave-enhanced sintering is clearly demonstrated with densification occurring at a lower temperature when a high-frequency electric field is applied. By considering the variation of electric field strength with furnace temperature, this enhancement is shown to be non-thermal in nature, being dependent on the electric field strength and not the power density (heating) of the microwaves. This dependence on electric field is consistent with an additional driving force term in the equation which describes the diffusion of vacancies through the material during sintering.     

Accelerated vibratory fatigue test by ultrasonic frequency at cryogenic temperature

The fatigue test is a time-consuming experiment. The accelerated fatigue testing technique is a dream for all researchers. In our laboratory, a vibratory fatigue testing machine was built, which works at 20 kHz for R = −1 and permits to carry out tests at cryogenic temperature. This is an automatic machine controlled by a PC computer. By using this apparatus, it is easy to save time by 400 to 500 times and a lot of liquid air (nitrogen or helium).

A titanium alloy, Ti6A14V (TA6V PQ french mark), was tested in liquid nitrogen (77 K) with this machine for S---N curve. At the same time, other fatigue tests were performed in SEP (Société Européenne de Propulsion) in conventional fatigue for the same material and the same conditions except the frequency. The comparison shows that the results are coherent.     

A broadband power meter calibration system in the frequency rangefrom 10 MHz to 40 GHz using a coaxial calorimeter

A broadband power meter calibration system based on a newly constructed coaxial calorimeter has been developed in the frequency region 10 MHz-40 GHz. The RF power is measured as the difference of DC power supplied to the calorimeter built-in heater in the RF load, when RF is turned off and on, holding an isothermal control between the RF load and a temperature reference. To minimize the error due to the adiabatic coaxial waveguide, we devised a new method utilizing its output port as a test port. The evaluations showed a calibration uncertainty of (0.28-2.2)% expressed by one standard deviation at the 1 mW level in the full band     

International collaboration: Will it be keeping alive East European research?

International scientific collaboration is very sensitive to political and economic changes in a country or a geopolitical region. Collaboration in research is reflected by the corresponding coauthorship of the published results which can be analysed with the help of bibliometric methods. Based on data from theScience Citation Index (SCI), the change of annual international coauthorship patterns ofBulgaria, Czechoslovakia, Hungary, Poland andRomania have been analysed for the periods 1981–1985 and 1984–1993, respectively. It is shown that international collaboration was not developing similarly in the countries under study. Whilst scientific communities of Hungary and Poland have already been opening in the early 80s, the international collaboration of the other East-European countries was still dominated by COMECON relations till 1989. As expected, since 1990 an increasing scientific collaboration with highly developed countries can be observed in all five countries. At the same time, scientific collaboration with the former communist countries shows a clear decline. The great share of international co-authorship links is some countries reflect various tendencies part of which are interpreted with the help of a cardiologic model.     

Studies of photoconductivity in β-Apo-8′ carotenal

The photoconductive properties of a carotenoid polyene,β-Apo-8′ carotenal in polycrystalline form has been studied. The growth of the photocurrent shows an overshoot in the growth-time curve before steady state value is attained. This behaviour of photocurrent is proposed to be due to higher value of recombination coefficient than trapping coefficient. From the temperature dependence study it is observed that the steady state photocurrent, at first increases with increase of temperature, attains a maximum at a particular temperatureT _max and then decreases with temperature. TheT _max value agrees with the temperature above and below which steady state photocurrent is attained differently. Monomolecular and bimolecular recombination processes at two temperature regimes are proposed to account for the observed behaviour. The dependence of photocurrent with excitation light intensity and wavelength study provide information on the carrier generation processes. The fast decay of photocurrent have been observed at different temperatures and from this study the decay constant is calculated and it is found to be temperature independent.     

ERD facility for analysis of hydrogen and deuterium in solids

Hydrogen is the lightest element in nature, and so, its detection and quantitative analysis is difficult by the conventional methods utilized for other elements. In the recent years the technique of elastic recoil detection analysis (ERD) using 1–2 MeV He⁺ beam has been developed to quantitatively and simultaneously analyze hydrogen and its isotopes in solids. Such a facility has been set up using the 2 MeV Van-de-Graaff accelerator at IIT Kanpur. It facilitates H and D analysis in a material up to a depth of ∼ 1μm with a detection sensitivity of 0·1 at.% and depth resolution of about 300 ?. The application potential of this setup is illustrated by presenting the results of measurements performed on Al:H:D systems prepared by plasma source ion implantation and highT _c YBCO pellets exposed to humid atmosphere.