Thermal mixing between subchannels: measurement method and applications

A new thermal tracing technique is presented for the measurement of enthalpy interchange between connected subchannels in one-phase axial flow. The method is simple and versatile, being capable of implementation on compact and non-homogeneous bundles using water as fluid. To present the technique, measurements of turbulent mixing were performed on a triangular array bundle with a relation of pitch to diameter of 1.33, at Reynolds numbers between 10⁴ and 6.8×10⁴. For this simple arrangement the precision of the method is discussed showing that accuracies better than 10% can be readily achieved. Measurements are also performed in presence of a mixing vane showing another field were the method can be advantageously applied.     

Energy Partitions and Image Segmentation

We address the issue of low-level segmentation for real-valued images. The proposed approach relies on the formulation of the problem in terms of an energy partition of the image domain. In this framework, an energy is defined by measuring a pseudo-metric distance to a source point. Thus, the choice of an energy and a set of sources determines a tessellation of the domain. Each energy acts on the image at a different level of analysis; through the study of two types of energies, two stages of the segmentation process are addressed. The first energy considered, the path variation, belongs to the class of energies determined by minimal paths. Its application as a pre-segmentation method is proposed. In the second part, where the energy is induced by a ultrametric, the construction of hierarchical representations of the image is discussed.     

Application of Kernel-Based Feature Space Transformations and Learning Methods to Phoneme Classification

This paper examines the applicability of some learning techniques to the classification of phonemes. The methods tested were artificial neural nets (ANN), support vector machines (SVM) and Gaussian mixture modeling (GMM). We compare these methods with a traditional hidden Markov phoneme model (HMM), working with the linear prediction-based cepstral coefficient features (LPCC). We also tried to combine the learners with linear/nonlinear and unsupervised/supervised feature space transformation methods such as principal component analysis (PCA), independent component analysis (ICA), linear discriminant analysis (LDA), springy discriminant analysis (SDA) and their nonlinear kernel-based counterparts. We found that the discriminative learners can attain the efficiency of HMM, and that after the transformations they can retain the same performance in spite of the severe dimension reduction. The kernel-based transformations brought only marginal improvements compared to their linear counterparts.     

Utilization Bounds for EDF Scheduling on Real-Time Multiprocessor Systems

The utilization bound for earliest deadline first (EDF) scheduling is extended from uniprocessors to homogeneous multiprocessor systems with partitioning strategies. First results are provided for a basic task model, which includes periodic and independent tasks with deadlines equal to periods. Since the multiprocessor utilization bounds depend on the allocation algorithm, different allocation algorithms have been considered, ranging from simple heuristics to optimal allocation algorithms. As multiprocessor utilization bounds for EDF scheduling depend strongly on task sizes, all these bounds have been obtained as a function of a parameter which takes task sizes into account. Theoretically, the utilization bounds for multiprocessor EDF scheduling can be considered a partial solution to the bin-packing problem, which is known to be NP-complete. The basic task model is extended to include resource sharing, release jitter, deadlines less than periods, aperiodic tasks, non-preemptive sections, context switches, and mode changes.     

Pattern codification strategies in structured light systems

Coded structured light is considered one of the most reliable techniques for recovering the surface of objects. This technique is based on projecting a light pattern and viewing the illuminated scene from one or more points of view. Since the pattern is coded, correspondences between image points and points of the projected pattern can be easily found. The decoded points can be triangulated and 3D information is obtained. We present an overview of the existing techniques, as well as a new and definitive classification of patterns for structured light sensors. We have implemented a set of representative techniques in this field and present some comparative results. The advantages and constraints of the different patterns are also discussed.     

Method for the evaluation of optical encoders performance under vibration

Optical encoders are the preferred choice for position measurement, both linear and angular, when high accuracy is required. Their performance is widely affected by deformation, temperature and vibration. This last aspect is analysed, showing the limitations found in conventional methods of performance evaluation. The determining parameters, such as sweep type, sampling rate, trigger etc. are examined and a final diagram of measuring accuracy versus frequency is presented, where aspects as resonance effects and measuring uncertainty are identified and discussed. Experimental analyses have been made in a commercial linear optical encoder and show that its measuring error is three times its precision, and wide areas of large measuring uncertainty are present in the frequency span. The information obtained through this method can be used to improve encoder design and mounting conditions in the machine, reducing the total error.     

Nanotip electron gun for the scanning electron microscope

Experimental nanotips have shown significant improvement in the resolution performance of a cold field emission scanning electron microscope (SEM). Nanotip electron sources are very sharp electron emitter tips used as a replacement for the conventional tungsten field emission (FE) electron sources. Nanotips offer higher brightness and smaller electron source size. An electron microscope equipped with a nanotip electron gun can provide images with higher spatial resolution and with better signal-to-noise ratio. This could present a considerable advantage over the current SEM electron gun technology if the tips are sufficiently long-lasting and stable for practical use. In this study, an older field-emission critical dimension (CD) SEM was used as an experimental test platform. Substitution of tungsten nanotips for the regular cathodes required modification of the electron gun circuitry and preparation of nanotips that properly fit the electron gun assembly. In addition, this work contains the results of the modeling and theoretical calculation of the electron gun performance for regular and nanotips, the preparation of the SEM including the design and assembly of a measuring system for essential instrument parameters, design and modification of the electron gun control electronics, development of a procedure for tip exchange, and tests of regular emitter, sharp emitter and nanotips. Nanotip fabrication and characterization procedures were also developed. Using a "sharp" tip as an intermediate to the nanotip clearly demonstrated an improvement in the performance of the test SEM. This and the results of the theoretical assessment gave support for the installation of the nanotips as the next step and pointed to potentially even better performance. Images taken with experimental nanotips showed a minimum two-fold improvement in resolution performance than the specification of the test SEM. The stability of the nanotip electron gun was excellent; the tip stayed useful for high-resolution imaging for several hours during many days of tests. The tip lifetime was found to be several months in light use. This paper summarizes the current state of the work and points to future possibilities that will open when electron guns can be designed to take full advantage of the nanotip electron emitters.     

Energy Efficient Cloud Service Provisioning: Keeping Data Center Granularity in Perspective

The cost of power and its associated delivery are becoming significant factors in the total expenditure of large-scale data centers. Numerous techniques have been proposed to address the energy efficiency issue in cloud systems. Recently, some efforts have been made to decentralize the cloud via distributing data centers in diverse geographical positions, at different scales. In this paper, we elaborate on the energy effectiveness of service provisioning on different cloud architectures, from a mega-data center to a nano data center, which provides the extreme decentralization in terms of cloud architecture, as well as P2P-clouds or community network clouds. We study the energy consumption through an analytical and simulation framework for video streaming and MapReduce applications.     

Sustainability assessment of dwellings – a comparison of methodologies

Building sustainability assessment tools (BSATs) aim to promote and rank the sustainability of building stock. This paper makes a deep comparative analysis on how dwellings are evaluated by five BSAT and one performance-based design tool. The comparison is based on: (i) the purpose of assessment; (ii) sustainability dimensions considered; (iii) indicators addressed; (iv) life cycle phases considered by the indicators; (v) type of indicators; (vi) measurements; (vii) aggregation processes; and (vii) life cycle phases during which the assessment was carried out. The evaluation showed that the scope of BSAT varies significantly as well as the life cycle phases addressed in the assessment. Financial issues are often excluded from the assessment. None of the schemes is totally quantitative or qualitative in their measurement system; all have different types of indicators and different ways to assess them. This research provides researchers and stakeholders with important inside knowledge on the tools that allow the development and construction of more sustainable buildings.     

Reduction of the Nitrate Content in Baby Spinach Leaves by Vacuum Impregnation with Sucrose

Vacuum impregnation (VI) has been widely utilized as a pre-treatment method prior to, e.g., the minimal processing, freezing, or drying of foods. In many cases, VI has been used to focus on the enrichment of fruits and vegetables with probiotics or micronutrients, texture enhancement, the modification of the sensory attributes, and extension of shelf life by pH reduction. However, little attention has been paid to the exploration of the metabolic consequences of VI that could lead to changes in the quality characteristics of plant tissues. Since nitrate has long been discussed as a compound that is harmful to human health, the aim of this investigation was to reduce the nitrate content in spinach leaves by feeding sucrose into the tissue using VI. The leaves, either non-treated or treated with VI, were stored under saturated humidity conditions and in darkness at 8 °C, for up to 72 h. VI-treated leaves showed a remarkable reduction in nitrate content as compared to the non-treated samples. Upon storage, sucrose was reduced, indicating that this sugar had been respired and had induced metabolization of the stored nitrate. The nitrite content of the treated leaves was unaffected, proving that this toxic compound was not accumulated in the baby spinach leaves upon external sucrose feeding.