Structural,optical and electrical properties of silicon nanocrystals embedded in SixC1−x/SiC multilayer systems for photovoltaic applications

In this work we present a structural, optical and electrical characterization of Si_xC_1?x/SiC multilayer systems with different silicon content. After the deposition process, an annealing treatment was carried out in order to induce the silicon nanocrystals formation. By means of energy-filtered transmission electron microscopy (EFTEM) we observed the structural morphology of the multilayers and the presence of crystallized silicon nanoprecipitates for samples annealed up to 1100 °C. We discuss the suitability of optical techniques such as Raman scattering and reflectance and transmittance (R&T) for the evaluation of the crystalline fraction of our samples at different silicon excess ranges. In addition, the combination of R&T measurements with simulation has proved to be a useful instrument to confirm the structural properties observed by EFTEM. Finally, we explore the origin of the extremely high current density revealed by electrical measurements, probably due to the presence of an undesired defective SiC_yO_z ternary compound layer, already supported by the structural and optical results. Nevertheless, the variation of the electrical measurements with the silicon amount indicates a small but significant contribution from the multilayers.     

Iron Ore Sintering: Process

Sintering is a thermal agglomeration process that is applied to a mixture of iron ore fines, recycled ironmaking products, fluxes, slag-forming agents, and solid fuel (coke). The purpose of the sintering process is manufacturing a product with the suitable characteristics (thermal, mechanical, physical and chemical) to be fed to the blast furnace. The process has been widely studied and researched in the iron and steelmaking industry to know the best parameters that allow one to obtain the best sinter quality. The present article reviews the sintering process that the mixture follows, once granulated, when it is loaded onto the sinter strand. There, the sinter mixture is partially melted at a temperature between 1300-1480°C and undergoes a series of reactions that forms the sinter cake to be loaded into the blast furnace to produce pig iron.     

Metabolomics of Genetically Modified Crops

Metabolomic-based approaches are increasingly applied to analyse genetically modified organisms (GMOs) making it possible to obtain broader and deeper information on the composition of GMOs compared to that obtained from traditional analytical approaches. The combination in metabolomics of advanced analytical methods and bioinformatics tools provides wide chemical compositional data that contributes to corroborate (or not) the substantial equivalence and occurrence of unintended changes resulting from genetic transformation. This review provides insight into recent progress in metabolomics studies on transgenic crops focusing mainly in papers published in the last decade.     

Levels of polybrominated diphenyl ethers in house dust in Central Poland

Polybrominated diphenyl ethers (PBDEs) are used as flame retardants in numerous products, from which they are emitted to the environment, including house dust. House dust is a source of human exposure to these compounds by ingestion. The aim of this article was to determine the levels of selected PBDEs in the house dust and indicate their potential sources of origin. PBDE congeners: BDE‐47, BDE‐99, BDE‐153 and BDE‐209, were analyzed in 129 samples. The geometric mean levels (and 95% CIs) of the aforementioned congeners amounted to 3.8 (3.1–4.7) ng/g, 4.5 (3.5–5.6) ng/g, 2.2 (2.1–2.4) ng/g and 345 (269–442) ng/g respectively. BDE‐209 was the dominant congener in the majority of tested samples. We found a statistically significant correlation between the concentrations of BDE‐47 and the computer operating time per day (r_s – 0.18) and the living area (r_s – 0.20). Statistically significant higher levels of BDE‐99 were found in homes where the floor was not replaced during the last 2 years.     

A likelihood-based framework for the analysis of discussion threads

Online discussion threads are conversational cascades in the form of posted messages that can be generally found in social systems that comprise many-to-many interaction such as blogs, news aggregators or bulletin board systems. We propose a framework based on generative models of growing trees to analyse the structure and evolution of discussion threads. We consider the growth of a discussion to be determined by an interplay between popularity, novelty and a trend (or bias) to reply to the thread originator. The relevance of these features is estimated using a full likelihood approach and allows to characterise the habits and communication patterns of a given platform and/or community. We apply the proposed framework on four popular websites: Slashdot, Barrapunto (a Spanish version of Slashdot), Meneame (a Spanish Digg-clone) and the article discussion pages of the English Wikipedia. Our results provide significant insight into understanding how discussion cascades grow and have potential applications in broader contexts such as community management or design of communication platforms.     

Controlling Exchange Coupling Strength in Ni x Cu1−x Thin Films

The thickness (d _F) and concentration (x) dependence of the Curie temperature of Ni _x Cu_1?x (d _F) ferromagnetic alloy layers (x=0.55, 0.65, d _F=[4.5 nm÷12 nm]) in contact with a vanadium layer was studied. The Curie temperature of the ferromagnetic layers depends on the thickness when it is comparable with the transition layer between the F and the vanadium layers, which is attributed to the proximity coupling of the interface region with the rest of the F layer. The present study provides valuable information for fabrication of samples with controlled exchange coupling strength for studies of superconductor/ferromagnet proximity effects.     

Desiccant Cooling Cycle Tuning for Variable Environmental Conditions

The performance of desiccant cooling systems has been increasingly addressed, with applications spanning from thermal comfort to gas-turbine air cooling. Desiccant systems are particularly suitable regarding the environmental impact, due to the absence of refrigerants with ozone-depleting properties. Moreover, the use of low-grade waste heat as the primary energy source also characterizes a low global warming potential, when compared to vapor compression systems. Under this scenario, this study demonstrates how desiccant ventilation cycles can be tuned for environmental conditions while maintaining the conditioned space within acceptable thermal comfort conditions. The analysis is based on a simple numerical procedure for desiccant cooling simulation in which the overall system operation is calculated from individual cycle components’ characteristics. With the employed methodology, the conditioned space state is calculated for different environmental conditions and compared to a standard, previously set, comfort zone. The results show that, in addition to desiccant wheel performance, the effectiveness of evaporative coolers and the regenerator is of prime importance for achieving acceptable thermal comfort conditions.     

Gram-Negative Flagella Glycosylation

Protein glycosylation had been considered as an eccentricity of a few bacteria. However, through advances in analytical methods and genome sequencing, it is now established that bacteria possess both N-linked and O-linked glycosylation pathways. Both glycosylation pathways can modify multiple proteins, flagellins from Archaea and Eubacteria being one of these. Flagella O-glycosylation has been demonstrated in many polar flagellins from Gram-negative bacteria and in only the Gram-positive genera Clostridium and Listeria. Furthermore, O-glycosylation has also been demonstrated in a limited number of lateral flagellins. In this work, we revised the current advances in flagellar glycosylation from Gram-negative bacteria, focusing on the structural diversity of glycans, the O-linked pathway and the biological function of flagella glycosylation.     

Characterisation of CO/NO/SO2 emission and ash-forming elements from the combustion and pyrolysis process

Bioenergy is considered as a sustainable energy which can play a significant role in the future’s energy scenarios to replace fossil fuels, not only in the heat production, but also in the electricity and transportation sectors. Emission formation and release of main ash-forming elements during thermal conversion of biomass fuels at different conditions have been the scope of this study. The experiments were conducted in a quartz glass reactor where the temperature and atmosphere could be controlled. The selected fuels represent a wide range of biomass compositions. They are torrefied softwood, spruce bark, waste wood, miscanthus, and wheat straw. The fuels were first grinded and then pressed with a pellet maker into pellets of the same size and weight. For each fuel, the experiments were carried out under both oxidation and pyrolysis condition, with atmosphere of 3 % O₂ + 97 % N₂ and 100 % N₂, respectively, at four residence times. The selected temperatures under which experiments were performed are 800, 900, and 1,050 °C. The concentration of SO₂, NO, CO, and CO₂ emissions and O₂ were monitored online by three analysers, simultaneously. The residue weight was measured after each process, and the comparison with the ash content of the fresh pellet is made. Additionally, the release of several ash-forming elements (K, Zn, Na, and Mn) from the fuels has been quantified as function of temperature and residence time by inductively coupled plasma mass spectrometry (ICP-MS) and inductively coupled plasma atomic emission spectroscopy (ICP-AES). Time-dependent formation of NO and SO₂ and other emissions is presented and discussed with respect to different temperature and combustion conditions.