Determination of three-dimensional joint loading within the lower extremities in snowboarding

In the biomechanical literature only a few studies are available focusing on the determination of joint loading within the lower extremities in snowboarding. These studies are limited to analysis in a restricted capture volume due to the use of optical video-based systems. To overcome this restriction the aim of the present study was to develop a method to determine net joint moments within the lower extremities in snowboarding for complete measurement runs. An experienced snowboarder performed several runs equipped with two custom-made force plates as well as a full-body inertial measurement system. A rigid, multi-segment model was developed to describe the motion and loads within the lower extremities. This model is based on an existing lower-body model and designed to be run by the OpenSim software package. Measured kinetic and kinematic data were imported into the OpenSim program and inverse dynamic calculations were performed. The results illustrate the potential of the developed method for the determination of joint loadings within the lower extremities for complete measurement runs in a real snowboarding environment. The calculated net joint moments of force are reasonable in comparison to the data presented in the literature. A good reliability of the method seems to be indicated by the low data variation between different turns. Due to the unknown accuracy of this method the application for inter-individual studies as well as studies of injury mechanisms may be limited. For intra-individual studies comparing different snowboarding techniques as well as different snowboard equipment the method seems to be beneficial. The validity of the method needs to be studied further.     

Designing fast LTL model checking algorithms for many-core GPUs

Recent technological developments made various many-core hardware platforms widely accessible. These massively parallel architectures have been used to significantly accelerate many computation demanding tasks. In this paper, we show how the algorithms for LTL model checking can be redesigned in order to accelerate LTL model checking on many-core GPU platforms. Our detailed experimental evaluation demonstrates that using the NVIDIA CUDA technology results in a significant speedup of the verification process. Together with state space generation based on shared hash-table and DFS exploration, our CUDA accelerated model checker is the fastest among state-of-the-art shared memory model checking tools.     

A novel split-and-merge algorithm for hierarchical clustering of Gaussian mixture models

The paper presents a novel split-and-merge algorithm for hierarchical clustering of Gaussian mixture models, which tends to improve on the local optimal solution determined by the initial constellation. It is initialized by local optimal parameters obtained by using a baseline approach similar to k-means, and it tends to approach more closely to the global optimum of the target clustering function, by iteratively splitting and merging the clusters of Gaussian components obtained as the output of the baseline algorithm. The algorithm is further improved by introducing model selection in order to obtain the best possible trade-off between recognition accuracy and computational load in a Gaussian selection task applied within an actual recognition system. The proposed method is tested both on artificial data and in the framework of Gaussian selection performed within a real continuous speech recognition system, and in both cases an improvement over the baseline method has been observed.     

Observation of a half-quantum-flux periodicity pattern in an rf SQUID with small critical currents

We have found experimentally that rf SQUID's working in a nonhysteretic mode with small critical currents give exactly at resonance and at very low rf bias a triangular pattern with a period equal to half of one elementary quantum of magnetic flux. We discuss a possible explanation of this peculiar result.     

Project proposal for the investigation of particle-stabilised emulsions and foams by microgravity experiments

The utilisation of particle-surfactants nanostructures as stabilising agents represents today the technologic and scientific frontier in the stabilisation of liquid films in emulsion and foams. This topic will be addressed by the proposal STEFAN (STabilisation of Emulsions and FoAms by Nanoparticles), proposed by European groups in the framework of the ESA AO-2004 for Life and Physical Sciences and Applied Research projects Similarly to what can be observed for surfactant-stabilised emulsions and foams, microgravity provides ideal conditions for the investigation of the hierarchy of involved objects: interfacial layer, liquid film, dispersed systems foam or emulsion. Microgravity experiments are planned by refurbishing the Experimental Container FASES for the ISS Fluid Science Laboratory and the facility FASTER for the European Drawer Rack, already under development in existing research programmes. Here the scientific guidelines of the project are presented together with examples and preliminary results on the effect of nano-particle-surfactant structures adsorbed at liquid interfaces. First experimental results have been achieved for particle monolayers at the water/air interface and a thermodynamic model was derived to describe the obtained surface pressure-area isotherms.     

Antiferromagnetic,Neutral, and Superconducting Band in La<Subscript>2</Subscript>CuO<Subscript>4</Subscript>

The symmetry of the Bloch functions in the conduction band of tetragonal and orthorhombic La₂CuO₄ is examined for the existence of symmetry-adapted and optimally localizable (usual or spin-dependent) Wannier functions. It turns out that such Wannier functions do not exist in the tetragonal phase. In the orthorhombic phase, on the other hand, the Bloch functions can be unitarily transformed in three different ways into optimally localizable Wannier functions: they can be chosen to be adapted to each of the three phases observed in the pure or doped material, that is, to the antiferromagnetic phase, to the superconducting phase or to the phase evincing neither magnetism nor superconductivity. This group-theoretical result is proposed to be interpreted within a nonadiabatic extension of the Heisenberg model. Within this model, atomic-like states represented by these Wannier functions are responsible for the stability of each of the three phases. However, all the three atomic-like states cannot exist in the tetragonal phase, but are stabilized by the orthorhombic distortion of the crystal. A simple model is proposed which may explain the physical properties of La_2−x Sr _x CuO₄ as a function of the Sr concentrationx.     

STS-107 OV-102 mission FAST experiment: Slow surface relaxation at the solution-air interface

The experiments are aimed at the study of the interfacial dilational properties, under microgravity conditions. The examined systems are aqueous solutions of the surfactant n-dodecyl-dimethylphosphine oxide, at different concentrations and temperatures. Low frequency harmonic disturbances are imposed to the interfacial area of an air bubble. Also square pulse disturbances are imposed to each studied system. The experimental results grant information about the dynamics of air-liquid single interfaces.     

Rheological studies with spherically shaped thin liquid films

The present work shows the first experimental and theoretical results for investigations on the rheology of liquid films. The experiments are planned to be performed under microgravity conditions. This environment will allow forming films of different thickness, which is impossible under ground conditions due to drainage. Then the films are forced to harmonic oscillations of the film area so that the film elasticity can be measured as a function of frequency. The presented theoretical model demonstrates the main relationships to be solved under corresponding boundary conditions     

Concerted utility review of VVER-440 safety research needs (VERSAFE)

There are twelve operating VVER-440/213 reactors in the Czech Republic, Hungary and Slovakia. The plant owners have carried out extensive safety enhancement programmes, which have included measures to improve prevention, mitigation and control of design basis accidents. Recently, there have been a number of projects to study the Severe Accident Management aspects of these plants. The plant owners have also initiated Plant Life Management programmes. The objective of the VERSAFE Concerted Action is to create a network of the VVER-440/213 plant owners and operators, which aims at definition of the further research needs of severe accidents and plant ageing from the utilities’ viewpoint. The starting point is to formulate a general approach to severe accident management and plant life management and then proceed to define the needs for the additional information expected from the safety research. The role of national research institutes and organisations of the partner countries is of crucial importance in performing such research and, thus, creating and maintaining the expertise on the national level. The successful completion of the project will assist in establishing well-defined research projects that are oriented to the needs of the end-users and provide information that can be used to facilitate and support the negotiations of the EU applicant countries operating VVER-440 reactors.