An investigation of the usability of image-based CAPTCHAs using PROMETHEE-GAIA method

Multimedia Tools and Applications - Today, it is difficult to find an adequate Web site with a registration form that is not protected with some automated human proof test. One of the oldest...     

Human-and-Humanoid Postures Under External Disturbances: Modeling,Simulation, and Robustness. Part 2: Simulation and Robustness

The sophisticated method for mathematical modeling of humanoid robots formulated in Part 1 of this paper is applied here to the dynamic task of keeping a posture under disturbance, which is equally important to humans and humanoid robots. The idea of this work is to develop and realize a simulator tool for dynamic analysis of human-or-humanoid behavior under disturbances. To show the potentials and verify this tool, we comparatively analyze the robustness of some postures to external disturbance. At this stage of research we do not conduct real experiments with humans/humanoids but try to verify our simulation tool by relying on available experience. Therefore, the postures for comparison are taken from everyday life and from sports: upright standing, squat posture, and three karate postures. As the external disturbance we choose an impulse and a permanent force, both with variable direction and magnitude.     

Theoretical and Experimental Analysis of Moisture-Dependent Thermal Conductivity of Lightweight Ceramic Bricks

The moisture-dependent thermal conductivity of two types of lightweight ceramic brick body is analyzed using both theoretical and experimental approaches. The basic physical properties are determined at first. Then, an impulse method is applied for the thermal-conductivity measurement. Initially, the material samples are dried, after that, they are exposed to liquid water for specific time intervals, and finally the moisture content is allowed to homogenize within the whole volume. The thermal-conductivity measurement is performed for different moisture contents achieved in this way. In the theoretical part, the homogenization principles are used for the calculation of the moisture-dependent thermal conductivity, utilizing the distribution functions based on the pore-size distribution measurement. Finally, a comparison of the measured and calculated data is done, and the validity of the applied effective media treatment is assessed.     

The Perceived Authenticity of Iconic Heritage Sites in Urban Tourism: the Case of Constitutional Hill,Johannesburg, South Africa

Cultural heritage sites play multiple roles in the development of urban tourism. Amongst these roles, the authentic properties of cultural heritage generate a sense of place, are the main source of authentic tourist experience and assume an important role in reaffirming cultural and national identity. This paper provides a contribution to authenticity discourse both theoretically and empirically. The study examines and re-evaluates the main sources of authenticity of tourist experience generated from South African iconic places which serve a dual function, as ‘must-see’ tourist attractions and as places of new post-1994 national African identity building. The focus is the Constitution Hill heritage site in Johannesburg. The research explores how authentic is the individual tourist experience of the site and whether differences exist in the way domestic and international tourists perceive the authenticity of the iconic place as representative of new South African identity. The results show that the majority of tourists perceive the place as authentic and derive an authentic experience from the visit. No statistically significant differences are observed between the experience of domestic versus international tourists’ experience of the site which was measured by four variables of authentic experience, namely, attraction, attention, outcomes and feelings.     

Aluminum scandium nitride thin-film bulk acoustic resonators for wide band applications

Piezoelectric c-textured Al_(1−x)Sc_xN thin films, where the Sc relative concentration, x, varies in the range 0-0.15 have been studied in view of radio frequency (RF) electro-acoustic applications. Thin film bulk acoustic wave resonators (FBARs) employing these films were fabricated and characterized as a function of the Sc concentration for the first time. The measured electromechanical coupling is found to increase by as much as 100% in the above concentration range. The results from this work underline the potential of the c-textured Al_(1−x)Sc_xN based FBARs for wide band RF applications.     

Osteoporosis Preclinical Research: A Systematic Review on Comparative Studies Using Ovariectomized Sheep

Sheep ovariectomy (OVX) alone or associated to steroid therapy, deficient diet, or hypothalamic–pituitary disconnection has proven to be of critical importance for osteoporosis research in orthopedics. However, the impact of specific variables, such as breed, age, diet, time after OVX, and other variables, should be monitored. Thus, the design of comparative studies is mandatory to minimize the impact of these variables or to recognize the presence of unwanted variables as well as to better characterize bone remodeling in this model. Herein, we conducted a systematic review of the last 10 years on PubMed, Scopus, and Web of Knowledge considering only studies on OVX sheep where a control group was present. Of the 123 records screened, 18 studies were included and analyzed. Results showed that (i) Merino sheep are the most exploited breed; (ii) 5–6 years of age is the most used time for inducing OVX; (iii) ventral midline laparotomy is the most common approach to induce OVX; (iv) OVX associated to steroid therapy is the most widely used osteoporosis model; and (v) success of OVX was mostly verified 12 months after surgery. In detail, starting from 12 months after OVX a significant decline in bone mineral density and in microarchitectural bone parameters as well as in biochemical markers were detected in all studies in comparison to control groups. Bone alteration was also site-specific on a pattern as follows: lumbar vertebra, femoral neck, and ribs. Before 12 months from OVX and starting from 3–5 months, microarchitectural bone changes and biochemical marker alterations were present when osteoporosis was induced by OVX associated to steroid therapy. In conclusion, OVX in sheep influence bone metabolism causing pronounced systemic bone loss and structural deterioration comparable to the situation found in osteoporosis patients. Data for treating osteoporosis patients are based not only on good planning and study design but also on a correct animal use that, as suggested by 3Rs principles and by ARRIVE guidelines, includes the use of control groups to be directly contrasted with the experimental group.     

Experimental Investigation and Thermodynamic Calculations of the Bi-Ge-Sb Phase Diagram

A phase diagram of the Bi-Ge-Sb ternary system was investigated experimentally by differential thermal analysis (DTA), scanning electron microscopy with energy-dispersive X-ray spectroscopy (SEM-EDS), and X-ray powder diffraction (XRD) methods and theoretically by the CALPHAD method. The liquidus projection; invariant equilibria; and three vertical sections, Sb-Bi_0.5Ge_0.5, Ge-Bi_0.5Sb_0.5, and Bi-Ge_0.5Sb_0.5, as well as isothermal sections at 773 K and 373 K (500 °C and 100 °C), were predicted using optimized thermodynamic parameters for constitutive binary systems from the literature. In addition, phase transition temperatures of the selected samples with compositions along calculated isopleths were experimentally determined using DTA. Predicted isothermal sections at 773 K and 373 K (500 °C and 100 °C) were compared with the results of the SEM-EDS and XRD analysis from this work. In both cases, good agreement between the extrapolated phase diagram and experimental results was obtained. Alloys from the three studied vertical sections were additionally analyzed using the Brinell hardness test.     

Technological and spoiling characteristics of the yeast microflora isolated from Bella Di Cerignola table olives

This study focused to investigate the technological significance and the spoiling impact of diverse yeast strains, isolated from 'Bella di Cerignola' Italian table olives. Sixty-four isolates (belonging mainly to the species Candida famata and C. guilliermondii ) were studied to assess their growth at different temperatures (15, 25 and 37 °C), pHs (4.0, 5.0 and 9.5) and NaCl concentrations (0–10.0%) in lab medium. Their pectolytic, xylanolytic, lipolytic and catalase activities were also evaluated. Most of the yeasts showed a moderate pectolytic activity and were able to grow at pH 9.5 after 120 h of incubation. Salt and temperature were the most important environmental variables affecting yeast growth, which could exert a strong selective pressure on yeast population. Candida guilliermondii appeared more resistant to high salt concentrations, whereas C. famata was able to grow at 15 °C.     

Effects of pH, cinnamaldehyde and heat-treatment time on spore viability of Alicyclobacillus acidoterrestris

A three variables–five levels central composite design was used to study the effects of pH (3.5, 4.0, 4.5, 5.0 and 5.5), cinnamaldehyde (0, 40, 80, 120 and 160 ppm) and heating temperature (80, 84, 88, 92 and 96 °C) on the spores of Alicyclobacillus acidoterrestris in malt extract broth (MEB). The heat shock resulted in a slight decrease of spore number from 3.2 to 2.5 log CFU mL⁻¹ and occurred at 80–85 °C depending on the pH of the medium. Otherwise, cinnamaldehyde acted as an additional hurdle within the storage time; the critical amounts to be used were included in the range 41.35–44.42 ppm of cinnamaldehyde and were related positively to the pH, i.e. the critical amount of active compound decreased with the decreasing of the pH.