Double-Headed Cationic Lipopeptides: An Emerging Class of Antimicrobials

Antimicrobial peptides (AMPs) constitute a promising tool in the development of novel therapeutic agents useful in a wide range of bacterial and fungal infections. Among the modifications improving pharmacokinetic and pharmacodynamic characteristics of natural AMPs, an important role is played by lipidation. This study focuses on the newly designed and synthesized lipopeptides containing multiple Lys residues or their shorter homologues with palmitic acid (C₁₆) attached to the side chain of a residue located in the center of the peptide sequence. The approach resulted in the development of lipopeptides representing a model of surfactants with two polar headgroups. The aim of this study is to explain how variations in the length of the peptide chain or the hydrocarbon side chain of an amino acid residue modified with C₁₆, affect biological functions of lipopeptides, their self-assembling propensity, and their mode of action.     

Microwave assisted combustion synthesis in the system Ti–Si–C for the joining of SiC: Experimental and numerical simulation results

Microwaves at 2.45 GHz have been applied to ignite the combustion synthesis of compacted Ti–Si–C powders mixtures, having 1:1:1 atomic ratio, in order to join SiC-based components. A mixture of different refractory phases such as TiC and TiSi₂ were obtained. Depending on the synthesis conditions, no residual silicon in the joint was detected, suggesting the suitability of the here proposed experimental joining approach for nuclear plants and high temperature applications. A simplified model was developed with the aim of obtaining a deeper understanding of the here proposed rapid, almost pressure-less and localized heating joining method. Experimental and numerical simulation results demonstrate that joining of SiC can be rapidly obtained with minimization of heat affected zones in the SiC substrates. Maximum apparent shear strength values of the joints ranged from 9.9 to 45.1 MPa, depending on the process conditions.     

A comparative study of photocatalytically active nanocrystalline tetragonal zyrcon-type and monoclinic scheelite-type bismuth vanadate

Monoclinic scheelite-type BiVO₄ is currently considered as one of the most promising non-titania photocatalysts, wheras tetragonal zircon-type BiVO₄ is still poorly understood. Herein, a new and simple synthetic approach was applied and nanostructured single-phase zircon-type BiVO₄ was successfully prepared by a controllable ethylene-glycol colloidal route. In addition, nanostructured monoclinic scheelite-type BiVO₄ powders were also fabricated through annealing of the as-prepared samples. A comparative study of the two BiVO₄ polymorphs was conducted and it turned out that the novel synthetic approach had a significant impact on porosity and photocatalytic performance of zircon-structured BiVO₄. All the prepared materials, as-prepared and annealed, were mesoporous, while measured values of specific surface area of some zircon-structured samples (～34?m²/g) were ～7 times higher than those reported thus far for this phase. Interestingly, for the first time, zircon-type BiVO₄, previously considered to be a poor photocatalyst, exhibited a better overall performance in degradation of methyl orange compared to monoclinic scheelite-type BiVO₄. Hence, it could be expected that the here-presented synthesis and observations will both arouse interest in scarcely studied tetragonal zircon-type BiVO₄ and facilitate as well as speed up further research of its properties.     

Laser surface nanostructuring for reliable Si3N4/Si3N4 and Si3N4/Invar joined components

IR pulsed laser radiation in air was applied to Si₃N₄ and Invar to obtain reliable Si₃N₄/Si₃N₄ and Si₃N₄/Invar adhesive bonded components. The laser pre-treatment produced a homogeneous nanostructured oxide layer on the surfaces, which effectively increased the adhesion at the adhesive/adherends interface and led to cohesive failure in the joining material. The mechanical strength of Si₃N₄/ Si₃N₄ and Si₃N₄/Invar joined components was measured, with and without laser nanostructuring, before and after thermal cycling from room temperature to 50?K, and it resulted that the exposure to extremely low temperatures did not affect the mechanical integrity of the joints. It was also demonstrated that this laser pre-treatment did not alter the mechanical properties of the ceramic substrate.     

Urinary mercury in people living near point sources of mercury emissions

As part of the European Mercury Emissions from Chlor Alkali Plants (EMECAP) project, we tested the hypothesis that contamination of ambient air with mercury around chlor alkali plants using mercury cells would increase the internal dose of mercury in people living close to the plants. Mercury in urine (U-Hg) was determined in 225 individuals living near a Swedish or an Italian chlor alkali plant, and in 256 age- and sex-matched individuals from two reference areas. Other factors possibly affecting mercury exposure were examined. Emissions and concentrations of total gaseous mercury (TGM) around the plants were measured and modeled. No increase in U-Hg could be demonstrated in the populations living close to the plants. This was the case also when the comparison was restricted to subjects with no dental amalgam and low fish consumption. The emissions of mercury to air doubled the background level, but contributed only about 2 ng/m(3) to long-term averages in the residential areas. The median U-Hg levels in subjects with dental amalgam were 1.2 microg/g creatinine (micro/gC) in Italy and 0.6 microg/gC in Sweden. In individuals without dental amalgam, the medians were 0.9 microg/gC and 0.2 microg/gC, respectively. The number of amalgam fillings, as well as chewing, fish consumption, and female sex were associated with higher U-Hg. The difference between the countries is probably due to higher fish consumption in Italy, demethylated methyl mercury (MeHg) being partly excreted in urine. Post hoc power calculations showed that if the background mercury exposure is low it may be possible to demonstrate an increase in U-Hg of as little as about 10 ng/m(3) as a contribution to ambient mercury from a point source.     

Whey protein aggregate formation during heating in the presence of κ-carrageenan

The effect of a negatively charged polymer, κ-carrageenan, on the aggregation behaviour of whey proteins during heating was studied. Aqueous solutions of whey protein isolate (WPI) at 0.5% were heated in the presence of κ-carrageenan (0.1%) at pH 7.0. This concentration was chosen as optimal in the detection of the intermediate aggregates during chromatographic analysis. The residual unaggregated protein, the intermediate aggregates and the soluble aggregates were all examined as a function of heating time and temperature, using size-exclusion chromatography coupled with light scattering detection. The presence of κ-carrageenan did not affect the aggregation of whey proteins heated at 75 °C; however, a change in the mechanism of aggregation seemed to occur at higher temperatures, and intermediates with higher molecular mass formed at 85 °C. At 90 °C, in the presence of κ-carrageenan, the extent of WPI aggregation was much larger, as soluble aggregates were no longer present and less residual protein was recovered in the unaggregated peak.     

分析泄漏功率攻击采用90nm CMOS技术的加密器件

在电子商务与电子银行等应用中,安全要求越来越严格.虽然加密技术提供了强健的算法,但这些算法的物理实现一般会通过器件电气运行中的物理现象,泄漏一些信息,攻击者会利用它来探测密钥.     

Evaluating mechanical properties and degradation of YTZP dental implants

Lately new biomedical grade yttria stabilized zirconia (YTZP) dental implants have appeared in the implantology market. This material has better aesthetical properties than conventional titanium used for implants but long term behaviour of these new implants is not yet well known. The aim of this paper is to quantify the mechanical response of YTZP dental implants previously degraded under different time conditions and compare the toughness and fatigue strength with titanium implants. Mechanical response has been studied by means of mechanical testing following the ISO 14801 for Standards for dental implants and by finite element analysis. Accelerated hydrothermal degradation has been achieved by means of water vapour and studied by X-ray diffraction and nanoindentation tests. The results show that the degradation suffered by YTZP dental implants will not have a significant effect on the mechanical behaviour. Otherwise the fracture toughness of YTZP ceramics is still insufficient in certain implantation conditions.     

Comparison of shear strength tests on AV119 epoxy-joined ceramics

The results of an experimental investigation on epoxy-joined CVD SiC and alumina tested in shear and apparent shear mode by four different configurations are presented. Ceramics have been joined by an epoxy adhesive (AV119), which is not to be considered as the final joining material for high temperature applications, but just as a model brittle joining material chosen to obtain several joined samples in a reasonable time. Advantages and disadvantages of each configuration are discussed and compared to results obtained with the same epoxy-joined carbon/carbon composites, tested by the same shear tests.