双口RAM在大屏幕LED显示系统中的应用开发

双口RAM与常规RAM的最大区别是双口RAM具有两套独立的地址、数据和控制线,允许两个独立的CPU或控制器同时异步地访问存储单元,双口RAM由片内的仲裁逻辑来确定哪一侧的CPU可以访问内部RAM单元.IDT7132是2kB的标准双口RAM.文中重点介绍采用以自顶向下方法设计的基于CLD(复杂可编程逻辑器件)的大屏幕LED(发光二极管)显示系统中双口RAM的应用,并给出了系统设计方法及相关硬件电路.本设计中IDT7132双口RAM用来连接单片机信号处理模块和CPLD扫描模块.     

Structuring communication software for quality-of-serviceguarantees

We propose architectural mechanisms for structuring host communication software to provide QoS guarantees. We present and evaluate a QoS sensitive communication subsystem architecture for end hosts that provides real time communication support for generic network hardware. This architecture provides services for managing communication resources for guaranteed QoS (real time) connections, such as admission control, traffic enforcement, buffer management, and CPU and link scheduling. The architecture design is based on three key goals: maintenance of QoS guarantees on a per connection basis, overload protection between established connections, and fairness in delivered performance to best effort traffic. Using this architecture we implement real time channels, a paradigm for real time communication services in packet switched networks. The proposed architecture features a process per channel model that associates a channel handler with each established channel. The model employed for handler execution is one of “cooperative” preemption, where an executing handler yields the CPU to a waiting higher priority handler at well defined preemption points. The architecture provides several configurable policies for protocol processing and overload protection. We present extensions to the admission control procedure for real time channels to account for cooperative preemption and overlap between protocol processing and link transmission at a sending host. We evaluate the implementation to demonstrate the efficacy with which the architecture maintains QoS guarantees on outgoing traffic while adhering to the stated design goals     

红外目标精跟踪方法的研究

本文提出了一种直接把红外前视传感器的输出作为测量值来跟踪红外目标的扩展型卡尔曼滤波跟踪算法。在滤波处理时,设置可变的测量矩阵,其目的在于提高运算速度和抑制噪声干扰。通过具体的实例,对所提跟踪算法的特点和有效性进行了细致的分析。     

ERCP and CT findings of ectopic drainage of the common bile duct into the duodenal bulb

OBJECTIVE: The purpose of this study was to evaluate ERCP and CT findings of ectopic drainage of the common bile duct into the duodenal bulb. CONCLUSION: Although rare, the diagnosis of ectopic drainage of the common bile duct into the duodenal bulb is important to prevent inadvertent damage during biliary tract or gastric surgery and to clarify the cause of chronic peptic ulcers.     

1.04 GBd low EMI digital video interface system using small swingserial link technique

In a high-resolution flat panel system, a conventional interface that directly connects a liquid crystal display (LCD) controller to a flat panel cannot overcome the problems of excess EMI (electromagnetic interference) and power caused by full-swing transmission signals in parallel lines. This paper presents a high-speed digital video interface system implemented with a low-cost standard CMOS (complimentary metal-oxide-semiconductor) technology that can mitigate EMI and power problems in high-resolution flat panel display systems. The combined architecture of the high-speed, small number of parallel lines and low-voltage swing serial interface can support resolutions from VGA (640×480 pixels) up to XGA (1024×768 pixels) with significant power improvement and drastic EMI reduction. To support high-speed, low-voltage swing signaling and overcome channel-to-channel skew problems, a robust data recovery system is required. The proposed digital phase-locked loop enables robust skew-insensitive data recovery of up to 1.04 GBd     

气流式加速度传感器的敏感机理

介绍了在研制气流式加速度传感器过程中，为对气流式加速度传感器进行建模，作者对气流式加速度传感器的工作机理进行了理论性探讨。在分析过程中以流体力学、传热学和惯性理论为基础并结合实验结果，建立了适合于气流式加速度传感器的气体运动方程和能量方程。同时还讨论了热线测量加速度的方法及根据实验分析了输入加速度对腔体内温度及传感器输出电压的影响，从而为进一步研究一系列气流式传感器的工作机理提供了方法。     

鲁布革水电厂计算机监控系统的更新改造

鲁布革水电厂原Ｒ３０计算机监控系统更新改造过程中，重点研究了与原西门子ＲＴＵ的数据交换，机组功率调节和线路定功率调节的实现有关问题，在对３号机组计算机监控系统改造试验的基础上，成功地实现了计算机监控系统的整体改造，改造后采用的国产ＮＡＲＩＳＳＪ－３０００计算机监控系统实用可靠，功能完善，配置灵活，具有国际，国内领先水平。     

Self-aligned offset gated poly-Si TFTs with a floating sub-gate

We have fabricated a self-aligned offset-gated poly-Si thin film transistor (TFT) by employing a novel photoresist reflow process. The gate structure of the new device is consisted of two unique patterns: A main-gate and a sub-gate. The new fabrication method extends the gate-oxide over the offset region. With the assistance of the sub-gate and reflowed photoresist a self-aligned offset region is successfully obtained due to the offset oxide acting as an implantation mask. The poly-Si TFT with symmetrical offsets is easily fabricated and the new method does not require any additional offset mask step. Compared with the misaligned offset gated poly-Si TFTs, excellent symmetric electrical characteristics are obtained     

CIMS装配和拆卸生产线的可靠性分析

本文对ＣＩＭＳ装配线和拆卸线的可靠性问题进行研究。文中分析了它们的运行状况，求出了两种生产线的稳态可用度，并用一个例子加以说明。     

非串行生产线的建模,分析及设计

本文利用等效工作站理论和工件流平衡原理，推导出非串行离散事件生产线可以等价于串联系统，并归结为装配和拆卸两条定理，解决了系统的建模、分析与设计问题。