医学超声图像处理系统

超声图像诊断是与X线CT、同位素扫描、核磁共振等一样重要的医学图像诊断手段。根据肝脏超声图像进行脂肪肝的诊断,是病变确诊的主要方法。但是,与CT和核磁共振等医学图像相比,超声图像的图像质量较差,目前的诊断以定性为主,受主观因素影响较大。以图像分割为基础,以VC语言为工具,建立了超声图像处理系统,对超声图像进行了二值化处理,并对处理结果进行了量化,为诊断提供了依据。     

磁浸没透镜的宽束曲轴像差分析的微分代数方法研究

微分代数是计算机数值分析领域中的一个非常有效的方法,可以实现任意高阶微分的准确计算.本文根据微分代数方法的基本原理,将其引入到磁浸没透镜的宽束曲轴像差的分析计算中,得到了任意阶曲轴像差的微分代数表达式.文中针对轴上磁场具有某种解析表达式的一个实际的磁浸没透镜系统,利用微分代数的曲轴像差分析方法,计算了它的曲轴像差,并给出了全部二阶和三阶几何像差的分布图形.     

垂直磁记录介质薄膜研制的新途径(英文)

本文阐述了铝氧化电沉积法获得磁记录材料的基本原理,研究了铝交流氧化膜中沉积磁性金属及其合金制备垂直磁记录薄膜的新途径,建立了铝交流氧化电沉积法,探讨了氧化膜的结构和磁特性的关系。     

无线局域网安全问题研究

为了提供相当于有线局域网的数据安全,IEEE802.11定义了有线等价保密(WEP)协议。然而,最近的研究发现WEP存在严重的缺陷。介绍了无线局域网存在的安全隐患,分析了WEP的结构以及WEP协议的缺陷以及可能遭受的攻击,并探讨了改进方案。     

Current IMT-2000 R&D status and views in Korea

In this article Korean development of IMT-2000 is considered. It includes the second-generation digital mobile communications, R&D and standardization activities related to IMT-2000, and the authors' perspectives on IMT-2000 in Korea. In Korea, there are many activities for development of IMT-2000 radio transmission technologies, and the results of these activities will be the submission of technologies to the ITU. However, the Korean telecommunications standardization body (TTA) will make every effort to make a common global standard for IMT-2000. Therefore, the TTA will make a domestic standard for IMT-2000 after the ITU finalizes the related Recommendations. It seems to the authors that difficulties in harmonization in the TTA are very similar to difficulties in harmonization worldwide. The only way of reaching the harmonization of IMT-2000 in Korea is that the key players should have the view from the end users' seat     

深亚微米MOSFET衬底电流的模拟与分析

利用器件模拟手段对深亚微米ＭＯＳＦＥＴ的衬底电流进行了研究和分析，给出了有效的道长度，栅氧厚度，源漏结深，衬底掺杂浓度以及电源电压对深亚微米ＭＯＳＦＥＴ衬底电流的影响，发现电源电压对深亚微米ＭＯＳＦＥＴ的衬底电流有着强烈的影响，热载流子效应随电源电压的降低而迅速减小，当电源电压降低到一定程度时，热载流子效应不再成为影响深亚微米ＭＯＳ电路可靠性的主要问题。     

An expectation-driven response understanding paradigm

This paper describes a model that can account for ad hoc user-responses to argument interrogative type of system-initiated questions. Successful implementation of the model can provide an alternative solution that is more effective than the menu-driven approach that has been proposed as a meager solution to enable the system to ask a question to the user. The proposed model assumes that when the system asks a question, it maintains an expectation of the potential answers. The system then uses the expectation as the focus to perform the most likely interpretation of the user's response. Without using such a focus the interpretation process could be unbounded. The interpretation process is mapped into a heuristic search problem. The interpretation process results in identifying a particular expectation-response relationship type, which the system can use to tailor its response strategy with respect to the given user-response. A prototype has been constructed to demonstrate the soundness of the proposed model     

Measurements and correlation of effect of cosolvents on the solubilities of complex molecules in supercritical carbon dioxide

A new transparent microscale circulation-type high pressure equilibrium cell with on-line sampling was devised. With this apparatus, experimental solubility of molecularly complex species such as steroids (cholesterol, stigmasterol and ergosterol) and fatty acids (palmitic acid and stearic acid) in supercritical carbon dioxide(sc-C0₂) were measured. Also, to find an appropriate substance for enhancing both the polarity and the solubility power of the SC-CO₂ solvent, we arbitrarily selected three polar substances such as acetone, methanol and water and the effect of these cosolvents on the solubility of solutes in SC-CO₂ are examined. The supercritical phase equilibrium data of solute-cosolvent-sc-CO₂ systems were quantitatively correlated using a new equation of state based on the lattice fluid theory incorporated with the concept of multibody interaction. We found that the addition of tracer amount of acetone or methanol to SC-CO₂ enhances the solubility of all solutes about thirty to sixty times when compared with the case of pure sc-CO₂ However, for the case of cosolvent water, no further enhancement of the solubility of solutes was realized. Also, the versatile fittability of the equation of state proposed in this work was demonstrated with the newly measured ternary supercritical equilibrium data.     

Biochemical identification of transmembrane segments of the Ca(2+)-ATPase of sarcoplasmic reticulum

The transmembrane segments of sarcoplasmic reticulum Ca(2+)-ATPase were determined by trypsinization of cytoplasmic side-out intact sarcoplasmic reticulum vesicles. The membrane portion of tryptic digest comprising the transmembrane fragments, joined by the intravesicular segments, was separated by sodium dodecyl sulfate-polyacrylamide gel electrophoresis after labeling with fluorescein 5-maleimide in the presence of sodium dodecyl sulfate. In this way, seven fluorescent bands of tryptic fragments below 11 kDa were observed which were derived from 4 pairs of membrane spanning segments and one hydrophobic sequence at the C-terminal end. Two peptides of 10.8 and 10.6 kDa had the identical N-terminal sequence beginning at Glu826, representing the transmembrane segments M7 and M8 and their connecting loop. A band at 8.1 kDa contained one peptide beginning at Tyr36 (M1/loop/M2). A 7.7-kDa peptide starting at Leu253 (M3/loop/M4) and a 7.3-kDa peptide beginning at Ala752 (M5/loop/M6) were also observed. A band at 6.7 kDa contained two peptides, one beginning at Ser48 (M1/loop/M2) and another beginning at Tyr763 (M5/loop/M6). In addition, a 4-kDa peptide beginning at Met925 was observed. The size of this peptide did not allow for a complete pair of transmembrane segments, but this peptide could have been derived from trypsinolysis between the last pair of membrane spanning segments. These data therefore provide biochemical evidence for at least 8 transmembrane segments and perhaps two more at the C-terminal end of the enzyme.     

水溶性防氧化剂在SMT用印制板上的应用

水溶性的防氧化剂是一种有机可焊性保护剂。其方法是在印制板完全阻焊、字符层的印刷，并经电检之后，通过表面浸渍在裸铜的贴片位或通孔内形成一种耐热性的有机可焊性膜层。这种有机、可焊、耐热的膜层，膜厚可达0.3-0.5mm，其分解的温度可达约300℃，传统的印制板的热风整平法亦无法满足QFP愈来愈密集的需求，同时也无法满足SMD表面平整度的要求，更无法适应PCB薄型化生产。烷基苯并咪唑的OSP法能弥补这项缺陷，因而在PCB业乃至SMT产业中得到了广泛的应用。