Preparation and characterization of biaxially oriented polypropylene film with high molecular orientation in the machine direction by sequential biaxial stretching

Novel approach of applying the ternary polymer blend of long‐chain branched polypropylene (LCB‐PP), conventional polypropylene (PP), and hydrogenated polydicyclopentadiene (hDCPD) has been employed to tensilize biaxially oriented polypropylene (BOPP) film in the machine direction (MD) by successive sequential biaxial stretching method. It is found that the addition of LCB‐PP improves the MD stretchability of the BOPP film of PP/hDCPD blend. Depending on the content of LCB‐PP, LCB‐PP/PP/hDCPD ternary blend could be biaxially stretched up to the MD stretching ratio (MDX) of 12 without film breakage whereas that of PP (conventional BOPP film) resulted in the MDX up to 6. This excellent MD stretchability enabled to tensilize the BOPP film in the MD, where Young's modulus in the MD could be increased up to 4.9 GPa, twice higher than that of conventional BOPP film. The orientation of total molecular chains and that of crystalline molecular chains were evaluated by in‐plane distribution of refractive indices and wide‐angle X‐ray diffraction, respectively. The results are discussed from the viewpoint of deformation behavior during stretching process. Moreover, the resultant film had a dimensional stability substantially equivalent to that of conventional one, in spite of the higher stretching ratio, and an improved moisture barrier property. © 2007 Wiley Periodicals, Inc. J Appl Polym Sci 2007     

Electrospun biodegradable nanofibers scaffolds for bone tissue engineering

Many polymeric materials have been developed and introduced for bone regeneration. Especially, their nanofibrous forms are mostly applied for artificial extracellular matrices. Polymeric materials in their nanofibrous form show some potent properties such as high surface‐to‐volume ratio, tunable porosity, and ease of surface functionalization. Benefiting from the properties of their main polymer and additives, they can provide new opportunities for cell seeding, proliferation, and new 3D‐tissue formation. This article focuses on most cited polymeric nanofibrous scaffolds fabricated by electrospinning and recent achievements. They were divided into two main categories: natural (collagen, silk, keratin, gelatin, chitosan, and alginate) and synthetic (e.g., polycaprolactone, polylactic acid, and polyglycolic acid) polymers. The role of several additives like hydroxyapatite, bone morphogenetic proteins (BMPs), tricalcium phosphate, and collagen type I in improving the adhesion, differentiation, and tissue formation of stem cells were discussed. Finally, the osteogenic capacity and ability of nanofibrous scaffolds to support the growth of clinically relevant bone tissue were briefly studied. © 2015 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2016 , 133, 42883.     

口服透明质酸对小鼠佐剂性关节炎的作用

目的:探讨口服透明质酸(HA)对小鼠佐剂性关节炎(AA)的治疗作用。方法:将40只6周龄的雄性小鼠随机分成4个小组,正常组、模型组、HA组和双氯芬酸钠组。通过给模型组、HA组和双氯芬酸钠组小鼠右后足注射弗氏完全佐剂(FCA)建立佐剂性关节炎模型,经连续4周口服透明质酸进行治疗后,分别对小鼠的体质量、足跖厚度进行测量,观察小鼠膝关节肿胀程度并评分,同时采用酶联免疫吸附实验(ELISA)检测小鼠血清中白介素-1(IL-1)和HA的含量。结果:口服HA能显著降低小鼠足跖厚度和关节炎指数,同时血清中IL-1和HA含量亦显著降低;并且各项指标与双氯芬酸钠无显著性差异。结论:口服透明质酸能有效地缓解小鼠膝关节的肿胀,降低血清中IL-1的含量,增强活动能力,因而对小鼠佐剂性关节炎具有良好的治疗作用。     

Synthesis and application of fluorescein- and biotin-labeled molecular probes for the chemokine receptor CXCR4

The design, synthesis, and bioevaluation of fluorescence- and biotin-labeled CXCR4 antagonists are described. The modification of D-Lys8 at an epsilon-amino group in the peptide antagonist Ac-TZ14011 derived from polyphemusin II had no significant influence on the potent binding of the peptide to the CXCR4 receptor. The application of the labeled peptides in flow cytometry and confocal microscopy studies demonstrated the selectivity of their binding to the CXCR4 receptor, but not to CXCR7, which was recently reported to be another receptor for stromal cell-derived factor 1 (SDF-1)/CXCL12.     

Effect of process variables on product yield distribution in thermal catalytic cracking of naphtha to light olefins over Fe/HZSM-5

The effect of temperature, WHSV and Fe loading over HZSM-5 catalyst in thermal-catalytic cracking (TCC) of naphtha for the production of light olefins has been studied. The response surface defined by three most significant parameters is obtained from Box-Behnken design method and the optimal parameter set is found. The results show that ethylene increases with temperature, while propylene shows an optimum at 650 °C. Moderate WHSV is favorable for maximum production of light olefins. Addition of Fe to HZSM-5 has a favorable effect on the production of light olefins up to 6% of loading. Excess amount of loading decreases the conversion of naphtha, which leads to a drop in light olefin yields. The yield of light olefins (ethylene and propylene) at 670 °C, 44 hr⁻¹ and 6 wt% Fe has been increased to 5.43 wt% compared to the unmodified HZSM-5 and reaches to 42.47 wt%.     

Fabrication and modification of polyvinylchloride based heterogeneous cation exchange membranes by simultaneously using Fe-Ni oxide nanoparticles and Ag nanolayer: Physico-chemical and antibacterial characteristics

Polyvinylchloride-blend-styrene butadiene rubber based nanocomposite cation exchange membranes were prepared by solution casting technique. Iron-oxide nanoparticles and Ag-nanolayer were simultaneously utilized as filler and surface modifier in membrane fabrication. The effects of Ag-nanolayer film thickness on membrane physicochemical and antibacterial characteristics of nanocomposite PVC-blend-SBR/Iron-oxide nanoparticles were studied. SEM images showed membrane roughness decreasing by Ag nanolayer thickness increasing. Membrane charge density and selectivity declined by Ag nanolayer coating up to 5 nm in membranes and then showed increasing trend by more nanolayer thickness. Ionic flux also showed increasing trend. Membranes showed good ability in E-Coli removal. 20 nm Ag-nanolayer coated membrane showed better performance compared to others.     

Application of SPRT to an image data sequence for a remote monitoring system

Recently, remote monitoring camera systems have been widely used for security. In such systems, one important function is that the system automatically detects any change in the scenes from the monitoring cameras. In wireless remote monitoring camera systems, the images of the scenes are generally transmitted as compressed data (e.g., JPEG file), because of the capacity of the wireless channel. This article shows the automated detection of the change point in time-series data of compressed JPEG file quantity (Kbytes) from the monitoring camera by applying the sequential probabilistic ratio test (SPRT) and the Chow test, which is well known as a standard method for detecting structural change in time-series data.     

Fundamental Behavior of Direct-Coupled Submicrosecond Pulse Energization in Electrostatic Precipitators

The fundamental characteristics of the direct-coupled pulse energization in electrostatic precipitators (EP's) are investigated in a test rig comprised of a coal pulverizing facility, a furnace, a gas cooling system, and an EP. The EP consisted of a corona electrode with barbed wires and a collection electrode with 300-mm duct spacing. This simulates the type of EP normally used in a coal-fired power station. The pulse-energized collection field shows a very high collection performance of more than 99 percent collection efficiency and the performance enhancement compared to the conventional dc energization, causing very severe back corona, becomes as large as H = 2.50.H is the enhancement factor in terms of the Deutsch migration velocity in the case of the very high resistivity dust of rd = 2 x 1013 ?cm at the gas temperature of Tg = 150°C. Even at the lower level of the dust resistivity at Tg = 110°C, where no back corona occurs in the dc-energized collection field, the performance enhancement is as large as H = 1.21. The mechanism of such great performance enhancement is likely to be the result of the very uniform and very intense formation of corona plasmas on the wires as a result of the very fast rise in the pulse voltage applied and a special sawtooth waveform of the operating voltage between the corona and collection electrodes.