Application of SPRT to an image data sequence for a remote monitoring system

Recently, remote monitoring camera systems have been widely used for security. In such systems, one important function is that the system automatically detects any change in the scenes from the monitoring cameras. In wireless remote monitoring camera systems, the images of the scenes are generally transmitted as compressed data (e.g., JPEG file), because of the capacity of the wireless channel. This article shows the automated detection of the change point in time-series data of compressed JPEG file quantity (Kbytes) from the monitoring camera by applying the sequential probabilistic ratio test (SPRT) and the Chow test, which is well known as a standard method for detecting structural change in time-series data.     

Production of ozone by surface and glow discharge at cryogenictemperatures

The generation of ozone at cryogenic temperatures is investigated with a special interest in increasing the yield of ozone by using low temperatures of liquid natural gas. Two modes of plasma chemical processes are studied, both based on electric discharges: one is the high-frequency surface discharge mode under ordinary gas pressure and at a temperature above the liquid temperature of ozone at this pressure (-111°C); the other is the glow discharge mode under a low gas pressure (0.5-2.0 torr) and low gas temperature (-190°C). The surface discharge mode uses a novel ozonizer developed by the authors made of 92% high-purity alumina and tungsten electrodes sintered together. This ozonizer has an extremely high resistance to large temperature gradients and thermal shock, which is a prerequisite for cryogenic operation. The glow discharge mode uses a Pyrex glow tube with a separate liquid-ozone collector. A dramatic improvement in the energy yield of ozone generation is achieved in both modes of cryogenic operation. The results of preliminary test for cryogenic ozone generation are very encouraging     

Fundamental Behavior of Direct-Coupled Submicrosecond Pulse Energization in Electrostatic Precipitators

The fundamental characteristics of the direct-coupled pulse energization in electrostatic precipitators (EP's) are investigated in a test rig comprised of a coal pulverizing facility, a furnace, a gas cooling system, and an EP. The EP consisted of a corona electrode with barbed wires and a collection electrode with 300-mm duct spacing. This simulates the type of EP normally used in a coal-fired power station. The pulse-energized collection field shows a very high collection performance of more than 99 percent collection efficiency and the performance enhancement compared to the conventional dc energization, causing very severe back corona, becomes as large as H = 2.50.H is the enhancement factor in terms of the Deutsch migration velocity in the case of the very high resistivity dust of rd = 2 x 1013 ?cm at the gas temperature of Tg = 150°C. Even at the lower level of the dust resistivity at Tg = 110°C, where no back corona occurs in the dc-energized collection field, the performance enhancement is as large as H = 1.21. The mechanism of such great performance enhancement is likely to be the result of the very uniform and very intense formation of corona plasmas on the wires as a result of the very fast rise in the pulse voltage applied and a special sawtooth waveform of the operating voltage between the corona and collection electrodes.     

A reflective‐display QR‐LPD®

Abstract— A novel reflective display [Quick‐Response Liquid Powder Display (QR‐LPD®)], has been developed. This paper‐like display has the advantages of outstanding image stability, easy viewing, low‐power consumption, and a high‐response time. QR‐LPD® will be promoted, initially, for use as electronic price‐tag displays for merchandise. In addition, QR‐LPD® is suitable for flexible display applications because it does not require TFT arrays or a high‐temperature process while maintaining an excellent paper‐like image as well as glass‐type display compatibility.     

Partial discharge inception characteristics under butt gap condition in liquid nitrogen/ PPLP/sup /spl reg// composite insulation system for high temperature superconducting cable

The partial discharge (PD) inception characteristics are studied in liquid nitrogen (LN/sub 2/)/polypropylene laminated paper (PPLP/sup /spl reg//) composite insulation system for high temperature superconducting (HTS) cable. Experimental results revealed that the magnitude of the initial PD increased as the PD inception electric field strength was increased, because the injected energy increased. Initial PD was generated at the first and third quadrant of applied AC voltage phase. The probability of initial PD at the positive and negative voltage phase was almost the same. The reason is because liquid nitrogen is a nonpolar molecule and we used symmetric electrode configuration with uniform electric field distribution. Finally, it was pointed out that PD inception electric field strength (PDIE) depended on the volume of the butt gap because of the increasing probability of weak points of electrical insulation, and PDIE linearly decreased with increasing stressed volume of the butt gap in the log-log scale.     

Questionnaire of cryopreserved allograft valves in Kyushu and Yamaguchi area

Japanese Society of Cryopreserved Thoracic Tissue Implantation was recently set up. Cryopreserved allograft valves are about to pervade in Japan. To clarify the interest, demands and supply of cryopreserved allograft valve in the area of Kyushu and Yamaguchi, we performed questionnaire investigation regarding this issue. Collection rate of this questionnaire was 87.5% (35/40 hospitals). Ninety-seven percent of the hospitals answered that they were interested in cryopreserved allograft. Ninety-four percent of the hospitals answered that they did not ethically hesitate to use cryopreserved allograft. Ninety-one percent of the hospitals hoped to perform cardiac surgery using allograft aortic valve if allograft is available. With respect to securing donors of allograft, two-third of the hospitals did not decide whether they could be involved in obtaining donors of allograft. As the number of the cadaver kidney donors is about 20 per year in the area of Kyushu and Yamaguchi, shortage of donors of allograft valve is anticipated.     

Structure and expression of the human SM22alpha gene, assignment of the gene to chromosome 11, and repression of the promoter activity by cytosine DNA methylation

The pore-forming alpha 1 subunit of L-type calcium (Ca2+) channels is the molecular target of Ca2+ channel blockers such as phenylalkylamines (PAAs). Association and dissociation rates of (-)devapamil were compared for a highly PAA-sensitive L-type Ca2+ channel chimera (Lh) and various class A Ca2+ channel mutants. These mutants carry the high-affinity determinants of the PAA receptor site in a class A sequence environment. Apparent drug association and dissociation rate constants were significantly affected by the sequence environment (class A or L-type) of the PAA receptor site. Single point mutations affecting the high-affinity determinants in segments IVS6 of the PAA receptor site, introduced into a class A environment, reduced the apparent drug association rates. Mutation I1811M in transmembrane segment IVS6 (mutant AL25/-I) had the highest impact and decreased the apparent association rate for (-)devapamil by approximately 30-fold, suggesting that this pore-lining isoleucine in transmembrane segment IVS6 plays a key role in the formation of the PAA receptor site. In contrast, apparent drug dissociation rates of Ca2+ channels in the resting state were almost unaffected by point mutations of the PAA receptor site.     

Performance of a-WO3/LiClO4-PC electrochromic displays

This paper deals with the improvements in response time and reliability of the aWO₃/LiClO₄-PC (propylene carbonate) electrochromic display. Response time was improved by adopting the highly porous a-WO₃ film, the porous reflector and the high surface area non-polarizable counter-electrode. Results from the reliability tests indicated that the ECD had a sufficient lifetime for practical applications such as in watches, clocks and calculators. The mechanism of performance drift upon cycling the display is investigated using ESCA, AES and atomic absorption methods.