提高供电质量减少高校供电能耗的措施

分析了高校现有供电网络存在的效率低、能耗大和供电质量不稳定的问题。提出了在增加投资不多的条件下，通过改变供电的运行方式既提高供电质量又减少能耗的一些方法。     

A One‐Kilobit PQR‐CMOS Smart Pixel Array

The photonic quantum ring (PQR) laser is a three dimensional whispering gallery (WG) mode laser and has anomalous quantum wire properties, such as microampere to nanoampere range threshold currents and √T‐dependent thermal red shifts. We observed uniform bottom emissions from a 1‐kb smart pixel chip of a 32×32 InGaAs PQR laser array flip‐chip bonded to a 0.35 µm CMOS‐based PQR laser driver. The PQR‐CMOS smart pixel array, now operating at 30 MHz, will be improved to the GHz frequency range through device and circuit optimization.     

浅谈移动通信基站天线系统设计

对基站天线的基本原理、天线选型、天线参数设置、天线安装等方面进行了描述，对天线下倾角、分集距离等进行了重点讨论。     

桥丝式电火工品静电发火过程的数值模拟

根据灼热桥丝式电火工品的电热起爆机理，考虑桥丝的轴向和径向散热以及药剂自身的分解放热，建立了灼热桥丝式电火工品静电发火的数理模型。用有限差分法对该模型方程进行求解，得出了桥丝式电火工品的三维温度场分布，并对结果进行了分析。     

A QoS management framework for distributed multimedia systems

This paper proposes a high‐performance connection management architecture to design a common QoS framework applied to an ATM network based on the Open Distributed Processing (ODP) concept. We design the QoS framework in accordance from the RM‐ODP information and computational viewpoints. Copyright © 2003 John Wiley & Sons, Ltd.     

绞车电控自动送钻装置离合器形式的探讨

目前电控自动送钻装置与绞车之间采用的径向或推盘气囊式离合器存在安全隐患,若采用气控齿式离合器+锁挡机构+行程开关组合的离合器形式,通过PLC智能化控制,可消除安全隐患,确保离合器工作可靠。简述了智能化控制的气控齿式离合器在电、机械、液压等驱动形式钻机上的应用原理,并指出气控齿式离合器在应用中应注意的事项。分析认为,从控制及钻井安全可靠的角度看,应大力推广使用智能控制的气控齿式离合器。     

洪水水文预报系统

水文预报系统是计算机算法应用于水文预报的一次实践 ,在从产汇流原理出发 ,详细阐述系统结构 ,工作原理及系统特征 ,还对软件的应用及今后开发前景进行了展望 ,随着社会发展和科技进步 ,实施计算机预报系统便于提高预报精度 ,增强水文预报的时效性 ,将使水文预报作用日益显著。     

应用多抽样率信号处理实现SSB调制信号

在探讨了软件无线电的基本概念,基于软件无线电定义的发射平台结构及多抽样率数字信号处理的基本内容的基础上,着重探讨了软件无线电发射平台中多抽样率数字信号处理的应用,并以单边带调制信号(SSB)为例,指出与传统SSB产生方法不同的结构。     

Examination of the role of oxygen in the photografting of methacrylic acid on a polyethylene film with a mixed solvent consisting of water and organic solvents

The photografting of methacrylic acid (MAA) on a linear low‐density polyethylene film (thickness = 30 μm) under air and nitrogen atmospheres was investigated at 60°C in mixed solvents consisting of water and an organic solvent, with xanthone as a photoinitiator. The organic solvents used were acetone, methanol, tetrahydrofuran, and dioxane. A maximum percentage of grafting occurred at a certain concentration of the organic solvent in the mixed solvent. This was observed for the systems under both air and nitrogen. The grafting reaction under air exhibited an induction period, but the rate of grafting after the period was greater than that under nitrogen. The formation of poly(ethylene peroxide)s by photoirradiation seemed to be a factor for the accelerated photografting under air. On the basis of attenuated total reflection infrared spectroscopy and scanning electron microscopy of the grafted film, the MAA‐grafted chains of the sample prepared under air tended to penetrate more deeply inside the film than those of the sample prepared under nitrogen. The resulting grafted films exhibited a pH‐responsive character: the grafted films shrank in an acidic medium but swelled in alkaline medium. This was evaluated from measurements of dimensional changes in the grafted films. © 2003 Wiley Periodicals, Inc. J Appl Polym Sci 89: 992–998, 2003