涤纶复合丝（POY＋DTY）的研发

DTY和POY网络复合丝是以聚酯直纺生产的两种不同规格的POY丝为原料,通过对加弹机进行适当改造,利用不同的加工路线,使一股POY丝经过加捻后形成DTY,再与另一股POY丝网络合股形成包芯复合丝.该复合丝利用POY丝和DTY丝的收缩差异和染色差异等不同风格特性,使得布面形成一种具有雪花状的色丁效果.该复合丝属于差别化纤维,是国家鼓励发展的项目,它具有优良的吸湿排汗性能和弹性保暖性能,是保暖内衣的首选面料,市场前景广阔.     

Simulating a Smartboard by Real-Time Gesture Detection in Lecture Videos

Gesture plays an important role for recognizing lecture activities in video content analysis. In this paper, we propose a real-time gesture detection algorithm by integrating cues from visual, speech and electronic slides. In contrast to the conventional “complete gesture” recognition, we emphasize detection by the prediction from “incomplete gesture”. Specifically, intentional gestures are predicted by the modified hidden Markov model (HMM) which can recognize incomplete gestures before the whole gesture paths are observed. The multimodal correspondence between speech and gesture is exploited to increase the accuracy and responsiveness of gesture detection. In lecture presentation, this algorithm enables the on-the-fly editing of lecture slides by simulating appropriate camera motion to highlight the intention and flow of lecturing. We develop a real-time application, namely simulated smartboard, and demonstrate the feasibility of our prediction algorithm using hand gesture and laser pen with simple setup without involving expensive hardware.      

偏高岭土的研究现状及展望

简要介绍了偏高岭土的反应机理和在国内外的研究现状。同时对偏高岭土的研究进行了展望 ,提出因麦特林水泥原料丰富 ,污染小 ,加工简单 ,性能优越 ,其应用前景广阔 ,应对其加强研究。     

含V、N无缝钢管表面外折缺陷产生原因的分析

通过对鞍钢生产的部分批号V、N微合金强化无缝钢管及生产该钢管的原料连铸坯和连轧管坯的表面缺陷进行研究，分析了含V、N钢管表面外折缺陷的成因，提出了改善钢管表面质量的方法。采用改进后工艺生产的无缝管，其表面外折废品量大幅度降低。     

Ozonation of CI Reactive Black 5 using rotating packed bed and stirred tank reactor

This study investigates the ozonation of CI Reactive Black 5 (RB5) by using the rotating packed bed (RPB) and completely stirred tank reactor (CSTR) as ozone contactors. The RPB, which provides high gravitational force by adjusting the rotational speed, was employed as a novel ozone contactor. The same ozone dosage was separately introduced into either the RPB or the CSTR for the investigation, while the experimental solution was continuously circulated within the apparatus consisting of the RPB and CSTR. The decolorization and mineralization efficiencies of RB5 in the course of ozonation are compared for these two methods. Moreover, the dissolved and off‐gas ozone concentrations were simultaneously monitored for the further analysis. As a result, the ozone mass transfer rate per unit volume of the RPB was significantly higher because of its higher mass transfer coefficient and gas–liquid concentration driving force. Furthermore, ozonation kinetics was found to be independent of the gravitational magnitude of an ozone gas–liquid contactor. Therefore, the results suggest employing RPBs as ozone‐contacting devices with the advantage of volume reduction. The experimental results, which can be used for further modeling of the ozonation process in the RPB, also show the requirement of correct design for the RPB. Consequently, the present study is useful for the understanding of practical application of RPBs. Copyright © 2004 Society of Chemical Industry     

Brazzein, a new high-potency thermostable sweet protein from Pentadiplandra brazzeana B

We have discovered a new high-potency thermostable sweet protein, which we name brazzein, in a wild African plant Pentadiplandra brazzeana Baillon. Brazzein is 2,000 times sweeter than sucrose in comparison to 2% sucrose aqueous solution and 500 times in comparison to 10% of the sugar. Its taste is more similar to sucrose than that of thaumatin. Its sweetness is not destroyed by 80 degrees C for 4 h. Brazzein is comprised of 54 amino acid residues, corresponding to a molecular mass of 6,473 Da.     

A probabilistic method for the design of power grounding systems

An improved multivariable, probabilistic method for the safety analysis of power grounding systems is presented. The application of this method is demonstrated in four examples. The first three examples illustrate the practical evaluation of one new and two existing substation grounding grids when the substation is connected to an overhead distribution system. The fourth example ascertains the relative impact of a difference between the S curve of IEC Publication 479 and Dalziel's equation for the allowable body current used in ANSI/IEEE Std 80-1986 on the validity of an exposure model based on the requirements of Std 80. In this example, the statistical data on ground faults have been taken from actual system records. Further possible refinements of the exposure model are discussed     

Enhanced electron emission from phosphorus-doped diamond-cladsilicon field emitter arrays

Undoped and phosphorus (P)-doped diamond-clad Si field emitter arrays have been successfully fabricated using microwave plasma chemical vapor deposition (MPCVD) technology. The electron emission from the blunt diamond-clad microtips are much higher than those for the pure Si tips with sharp curvature due to a lower work function. Furthermore, the characteristics of emission current against applied voltage for the P-doped diamond-clad tips show superior emission at lower field to the undoped ones. After the examination of Auger electron spectroscopy (AES) and electrical characteristics of as-grown diamond, such a significant enhancement of the electron emission from the P-doped diamond-clad tips is attributed to a higher electron conductivity and defect densities     

Exact evaluation of laser linewidth requirements for optical PSKhomodyne communication systems with balanced PLL receivers

The power penalty induced by imperfect phase recovery in PSK homodyne communication systems with balanced phase-locked loop receivers are exactly evaluated. Optimum phase deviations between the mark-state and the space-state bits are used in this study. This study for the first time shows the imperfect-phase-recovery-induced power penalty as a function of laser linewidth with optimum phase deviations considered. It can be estimated from the theoretical result that an optimal balanced PLL receiver requires the laser linewidth as Δν⩽1.15×10^-6× (bit rate) in contrast to the previous reported one Δν⩽5.88×10^-6× (bit rate). We also point out here that the previously reported laser linewidth requirement was wrongly estimated