Efficient FPGA implementation of bit-stream multipliers

A four-input adder structure for the FPGA implementation of a sigma-delta bit-stream multiplier is proposed. Conventional bit-stream multiplier implementations involve two-input adder circuits. It is shown that the four-input adder structure is more resource-efficient (over 40% hardware savings) and faster (over 20% higher clock frequency) when implemented using state-of-the-art FPGA architecture featuring six-input look-up tables     

The biomechanics of lumbar graded facetectomy under anterior-shear load

In this paper, an anatomically accurate three-dimensional finite-element (FE) model of the human lumbar spine (L2-L3) was used to study the biomechanical effects of graded bilateral and unilateral facetectomies of L3 under anterior shear. The intact L2-L3 FE model was validated under compression, tension, and shear loading and the predicted responses matched well with experimental data. The gross external (translational and coupled) responses, flexibilities, and facet load were delineated for these iatrogenic changes. Results indicted that unilateral facetectomy of greater than 75% and bilateral facetectomy of 75% or more resection markedly alter the translational displacement and flexibilities of the motion segment. This study suggests that fixation or fusion to restore strength and stability of the lumbar spine may be required for surgical intervention of greater than 75% facetectomy.     

Numerical investigation of self-heating effects of oxide-confined vertical-cavity surface-emitting lasers

We present a comprehensive numerical model to simulate self-heating effects of oxide-confined vertical-cavity surface-emitting lasers (VCSELs) under continuous-wave operation. The model self-consistently accounts for the close interaction between optical, electrical, and thermal processes in VCSELs. In particular, hot carriers and nonequilibrium optical phonons in the quantum wells are modeled by solving a carrier energy balance equation and an optical phonon rate equation. Our numerical simulations reveal that they are responsible for aggravated thermal rollovers in VCSELs' L-I characteristics. Detailed comparisons are made and good agreement is obtained between simulations and experiments for the L-I-V and lasing wavelength characteristics of VCSELs with varying oxide aperture size. Various mechanisms that result in the L-I thermal rollover behavior are also investigated with the aid of simulations.     

Control of high common mode voltage during transthoracicdefibrillation

A high common mode voltage (V_cm) relative to earth ground is produced on the myocardium during the delivery of a defibrillator pulse and can generate a differential error signal when potential gradients are recorded with bipolar electrodes and isolation amplifiers. The error signal is proportional to V_cm, and therefore, a reduction in V_cm improves the accuracy of the potential gradient data. Experiments were conducted on 5 dogs to determine whether V_cm can be controlled using a bridge circuit. The bridge circuit consisted of a 5 kΩ power rheostat in parallel with the transthoracic resistance of the dog. The variable contact of the rheostat was connected to earth ground, and by adjusting the rheostat, V_cm on the myocardium could be varied. In each dog, 20 A shocks were delivered through stainless steel transthoracic electrodes. Point contact electrodes sutured to the epicardium were used to measure V_cm. It was determined that V_cm could be reduced to approximately zero at a given electrode on the heart. In addition, for the 5 dogs studied, the maximum measured V_cm on the heart was only 10% of the transthoracic voltage when the bridge circuit was balanced for an interior point in the heart     

On the use of Reed-Solomon codes in improving digital FMtransmission performance in Rayleigh fading

Reed Solomon codes with interleaving are used in a binary FM transmission affected by Rayleigh fading as encountered in land mobile radio. A new decoding algorithm is proposed which can be implemented in simple hardware. The error performance of the binary FM system with the RS code with one and two degrees of interleaving is measured. A significant reduction of error rate floor as a function of fading speed is noted and discussed     

DOA estimation of wideband sources without estimating the number of sources

In this paper, we propose a new technique to estimate wideband source directions from the sensor snapshots without requiring to know the number of sources present in the scenario. This work is motivated by the fact that the existing model order estimation (number of sources) techniques for wideband source scenario are either inaccurate or computationally expensive. Direction-of-arrival (DOA) estimation is realized using a beamformer framework which imposes nulls in the spatial spectrum along the source directions. The null width along the frequency axis is widened by introducing a new data dependent term into the optimization problem, thus achieving wideband capability. Furthermore, the temporal processing of the data snapshots drastically reduces the number of snapshots required for wideband DOA estimation. The effectiveness of the proposed formulation is studied with simulated experiments.     

Demonstration of aluminum-free metamorphic InP/In0.53Ga0.47As/InP double heterojunction bipolar transistors on GaAssubstrates

We report, for the first time, the successful fabrication of aluminum-free metamorphic (MM) InP/In_0.53 Ga_0.47 As/InP double heterojunction bipolar transistors (DHBTs) on GaAs substrates with a linearly graded In_xGa_1-xP buffer grown by solid-source molecular beam epitaxy (SSMBE). Devices with 5×5 μm² emitters display a peak current gain of 40 and a common-emitter breakdown voltage (BV_CE0) higher than 9 V, a current gain cut-off frequency (f_T) of 48 GHz and a maximum oscillation frequency (f_max) of 42 GHz. A minimum noise figure of 2.9 dB and associated gain of 19.5 dB were measured at a collector current level of 2.6 mA at 2 GHz. Detailed analysis suggests that the degradation of the base-emitter heterojunction interface and the increase of bulk recombination are the most probable causes for the poorer device performance of current metamorphic HBTs compared with lattice-matched HBTs     

Generalized multiuser orthogonal space-division multiplexing

This paper addresses the problem of performing orthogonal space-division multiplexing (OSDM) for downlink, point-to-multipoint communications when multiple antennas are utilized at the base station (BS) and (optionally) all mobile stations (MS). Based on a closed-form antenna weight solution for single-user multiple-input multiple-output communications in the presence of other receiver points, we devise an iterative algorithm that finds the multiuser antenna weights for OSDM in downlink or broadcast channels. Upon convergence, each mobile user will receive only the desired activated spatial modes with no cochannel interference. Necessary and sufficient conditions for the existence of OSDM among the number of mobile users, the number of transmit antennas at the BS, and the number of receive antennas at the MS, are also derived. The assumption for the proposed method is that the BS knows the channels for all MS's and that the channel dynamics are quasi-stationary.     

Enhanced Electrochromism with Rapid Growth Layer‐by‐Layer Assembly of Polyelectrolyte Complexes

In this work, a facile method to deposit fast growing electrochromic multilayer films with enhanced electrochemical properties using layer‐by‐layer (LbL) self‐assembly of complex polyelectrolyte is demonstrated. Two linear polymers, poly(acrylic acid) (PAA) and polyethylenimine (PEI), are used to formulate stable complexes under specific pH to prepare polyaniline (PANI)/PAA‐PEI multilayer films via LbL deposition. By introducing polymeric complexes as building blocks, [PANI/PAA‐PEI]_n films grow much faster compared with [PANI/PAA]_n films, which are deposited under the same condition. Unlike the compact [PANI/PAA]_n films, [PANI/PAA‐PEI]_n films exhibit porous structure that is beneficial to the electrochemical process and leads to improved electrochromic properties. An enhanced optical modulation of 30% is achieved with [PANI/PAA‐PEI]₃₀ films at 630 nm compared with the lower optical modulation of 11% measured from [PANI/PAA]₃₀ films. The switching time of [PANI/PAA‐PEI]₃₀ films is only half of that of [PANI/PAA]₃₀ films, which indicates a faster redox process. Utilizing polyelectrolyte complexes as building blocks is a promising approach to prepare fast growing LbL films for high performance electrochemical device applications.     

Theoretical design for 120 GHz semiconductor junction circulators: effects of different numbers of terms in the Green's function

A theoretical analysis of the predicted performance and field distributions for semiconductor junction circulators is based on Bosma's Green's function approach which involves a summation of infinite series in the mathematical derivation. The effects are considered of taking a different number of terms in the series, looking at three different circulators centred at 120 GHz. The narrowband semiconductor circulators show a similar effect to the ferrite junction circulator because the field distributions inside the semiconductor discs can be approximated by only considering the dominant modes. However, there is no dominant mode in the broadband circulator and the higher order modes play an important role in the operation of this circulator. In order to obtain a precise representation of the circulation effects inside both narrowband and broadband circulators, at least up to the 6th term, or 18 terms in all, are required to be added in the summation of Green's functions.