The base current degradation of poly-emitter BJTs under AC stress

A simple model for the analysis of the ac stress effect in poly-emitter bipolar transistors is presented. Apart from the reverse-bias induced hot-carrier effects, the forward-bias recovery effect is a key factor under ac stress, it obviously suppresses the base current degradation of the device which is caused during the reverse-bias periods. In this work, we derived the relationship between the excess base current and the stress time for different ac stress conditions. This model is verified with experimental results.<>     

Bandwidth allocation algorithms for weighted maximum rate constrained link sharing policy

This paper addresses the problem of bandwidth allocation under the weighted maximum rate constrained link sharing policy and proves a key theory in the condition of allocation termination. We propose several algorithms with various worst-case and average-case time complexities, and evaluate their computation elapse times.     

Characterizing the deformation behavior of Tertiary sandstones

Tertiary sandstones possess deformational behavior different from hard rocks, especially the relatively larger amount of volumetric dilation during shearing. Such excess dilation contributes to the increase of crown settlement during tunnel excavation and accounts for several cases of tunnel squeezing within Tertiary sandstones. Therefore, the deformation behavior of Tertiary sandstones sampled from more than 13 formations was studied. To distinguish the volumetric deformation induced by hydrostatic stress or by shear stress as well as to decompose the elastic and the plastic components of strains, special experimental techniques, including pure shear tests and cycles of loading–unloading were applied.The experimental results reveal that the deformation of Tertiary sandstone exhibits the following characteristics: (1) significant amount of shear dilation, especially elastic shear dilation; (2) non-linear elastic and plastic deformation; (3) plastic deformation occurs prior to the failure state. Furthermore, features of plastic deformation were inferred from experimental results and, as a result, the geometry of plastic potential surface and the hardening rule were accordingly determined. A constitutive model, involving nonlinear elastic/plastic deformation and volumetric deformation induced by shear stress, is proposed. This proposed model simulates the deformational behavior for the shear-dilation-typed rocks reasonably well. Furthermore, tests on the versatility of the proposed model, including varying hydrostatic stress and stress paths, indicate that the proposed model is capable of predicting deformational behavior for various conditions.     

Intelligent control of doubly‐fed induction generator systems using PIDNNs

An intelligent control for a stand‐alone doubly‐fed induction generator (DFIG) system using a proportional‐integral‐derivative neural network (PIDNN) is proposed in this study. This system can be applied as a stand‐alone power supply system or as the emergency power system when the electricity grid fails for all sub‐synchronous, synchronous, and super‐synchronous conditions. The rotor side converter is controlled using field‐oriented control to produce 3‐phase stator voltages with constant magnitude and frequency at different rotor speeds. Moreover, the grid side converter, which is also controlled using field‐oriented control, is primarily implemented to maintain the magnitude of the DC‐link voltage. Furthermore, the intelligent PIDNN controller is proposed for both the rotor and grid side converters to improve the transient and steady‐state responses of the DFIG system for different operating conditions. Both the network structure and online learning algorithm are introduced in detail. Finally, the feasibility of the proposed control scheme is verified through experimentation. Copyright © 2011 John Wiley and Sons Asia Pte Ltd and Chinese Automatic Control Society     

Synthesis and characterization of novel polyesterimides

A series of soluble novel polyesterimides was synthesized from diamines [a mixture of 2,2‐bis(4‐(4‐aminophenoxy)phenyl)propane (BAPP) with amine‐terminated polysiloxane (ATPS) in various mole ratios] and the ester‐group‐containing dianhydrides. The ester group containing dianhydrides in turn was synthesized by the transesterification reaction of trimellitic anhydride (TMA) with diacetate ester of hydroquinone (HQ), 4,4′‐dihydrophenyl (BP), 1,6‐hexanediol, or ethylene glycol. The resulted polyesterimides were characterized by using Fourier‐transform infrared spectroscopy, inherent viscosity, solubility, differential scanning calorimetry (DSC), and thermogravimetric analysis (TGA). The polyesterimides of BP and HQ had relatively high glass transition temperatures in the range of 214.7–227.2 and 195.7–210.5°C, respectively. The glass transitions decreased rather slowly with the increase in polysiloxane content. Thermal stability and the weight‐loss behavior of polyesterimides were studied by TGA. All polyesterimides of BP and HQ (BPI and HQI) showed no significant weight loss below 500°C in a N₂ environment, and the decomposition temperatures (T_d5%) of BPI and HQI were >520°C. Most polyesterimides were soluble in polar aprotic solvents and m‐cresol. © 2004 Wiley Periodicals, Inc. J Appl Polym Sci 94: 730–738, 2004     

Novel positive‐working aqueous‐base developable photosensitive polyimide precursors based on diazonaphthoquinone‐capped polyamic esters

Novel positive‐working aqueous‐base developable photosensitive polyimide (PSPI) precursors based on partially diazonaphthoquinone (DNQ)‐capped polyamic esters bearing phenolic hydroxyl groups and a DNQ photosensitive compound (PIC‐3) were developed. The partially DNQ capped polyamic esters were prepared from an esterification reaction of 1,2‐naphthoquinone diazide‐5‐sulfonyl chloride with the polyamic esters. The partially DNQ capped polyamic esters decreased the dark film loss effectively in the aqueous‐base developer and were able to make thicker film resists compared to the uncapped polyamic esters. The 25 mol % DNQ‐capped BisAPAF–PMDA polyamic ester and BisAPAF–ODPA polyamic ester containing 25 wt % PIC‐3 photosensitive compound showed a sensitivity of 176 and 185 mJ/cm², and a contrast of 1.68 and 1.02, respectively, in a 3‐μm film with 1.25 wt % tetramethylammonium hydroxide developer. A pattern with a resolution of 5 μm was obtained from both PSPI precursor compositions. © 2003 Wiley Periodicals, Inc. J Appl Polym Sci 90: 2293–2300, 2003     

Design and control of reactive distillation for ethyl and isopropyl acetates production with azeotropic feeds

Reactive distillations for the production of ethyl acetate (EtAc) and isopropyl acetate (IPAc) are classified as the type-II process where the first column consists of a reactive zone and a rectifying section followed by a stripper [Tang et al., 2005. Design of reactive distillations for acetic acid esterification with different alcohols. A.I.Ch.E. Journal 51, 1683-1699]. Instead of using pure alcohols and acetic acid as reactants, this paper studies the effects of reactant purity on the design and control of reactive distillation. This offers significant economical incentives (by reducing raw materials costs), because ethanol forms an azeotrope with water at 90 mol% and isopropanol/water has an azeotrope at 68%. The purities of the acid is set to 95% for acetic acid (industrial grade), 87% for ethanol, and 65% for isopropanol. The results show that the total annual costs (TAC) increase by a factor of 5% for EtAc and 8% for IPAc production using reactive distillation. Next, the operability of the reactive distillations with azeotrope feeds is explored. Three disturbances, feed flow, acid feed purity, and alcohol feed composition, are introduced to assess control performance using dual-temperature control and one-temperature-one-composition control. Simulation results indicate good control performance can be achieved for reactive distillation with azeotropic feeds.     

THERMODYNAMIC PERFORMANCE PREDICTION FOR NON-CFC MIXTURES

The ideal thermodynamic performances of a variety of non-CFC refrigerants and their mixtures were calculated by using the Patel-Teja equation of state. The results indicated that the preferable non-CFC refrigerant mixtures could be HCFC-I24 +HFC-152a, HFC-152a + HFC-134, dimethyl ether + HCFC-22, and dimethyl ether + HCFC-124 for air-conditioning systems, and binary mixtures of HCFC-22 + HFC-125, and HCFC-22 + HFC-143a for low-temperature applications. Those potential non-CFC mixtures were suggested for further investigations.     

Fischer–Tropsch synthesis. Compositional changes in an iron catalyst during activation and use

The equilibrium phase compositions of iron have been calculated for gas compositions that could be encountered during the Fischer–Tropsch synthesis. The gas compositions measured experimentally for CO conversion levels in the 30–90% range show that iron should be present as the carbide phase. However, experimental characterization of iron catalysts show that a significant fraction of the iron is present as Fe₃O₄ following synthesis for several days. A model that can account for the experimental catalyst phase composition and the gases present in the reactor would have a core of Fe₃O₄ and an outer layer of iron carbides.