英国“地方发展框架”的监测机制及其借鉴意义

英国的城市规划体系在长期的发展完善过程中，逐步摸索建立了一套成熟的城市规划动态监测机制，其工作方法、技术路线、监督软件系统以及对于监管工作重点和难点的把握和处理经验，为我国建设城市规划动态监测机制系统提供了宝贵经验。本文对英国城市规划体系的新变化作了简要介绍，重点对地方发展框架的监测机制进行了分析研究，总结了英国的经验对我国正在建设的城市规划动态监测系统的借鉴意义。     

重庆菜袁路隧道模拟设计

本文论述应用平面变形条件下的模型试验结果,分析研究重庆菜袁隧道的初步设计,确定喷射混凝土和岩石锚杆的尺寸和二次衬砌的厚度,以及选择适合的施工方法。     

The creation of the incapable social tenant in Flanders,Belgium. An appraisal

As long as the social rented sector housed traditional families and the allocation procedures were rather loose, there was little commotion about the sector. A combination of a change in family structures, economic changes, and the strengthening of allocation procedures in favour of those most in need did change perceptions. Marginalisation and ghettoisation, especially of high-rise social housing estates, became buzzwords. This paper deals with the causes of these changes and with their implications. The marginalisation discourse calls for enlarging the target groups and estate-specific allocation procedures (to obtain a `social mix'). It illustrates a profound desire to diminish the number of ethnic minorities, single parents, single-person households and all kinds of people with a weak income profile who gain access to social rental housing. Furthermore, this discourse is reaching a crescendo: after it was started in the early 1990s by staff members of local social housing companies, it passed through the union of the social housing companies, the umbrella organisation of the sector, and parliament, reaching its greatest momentum so far in early 2002 when it was adopted by the Flemish housing minister. The counterpoint to this negative discourse is the high degree of satisfaction among social tenants, as observed in a study carried out in 1999. In our paper we will try to explain the background of these opposing trends and the possible consequences for the social rental housing in general and for tenants in particular.     

The potential use of <Emphasis Type="Italic">Fabaceae</Emphasis> lianas fibers in papermaking

The objective of this study was to anatomically characterize the fibers of nine species of Fabaceae lianas, to determine their potential in papermaking and to define which biometric parameters can be used to distinguish and identify individuals. The species presented average values of 76.81, 57.45, 42.55, and 1.81 for the felting index, wall fraction, coefficient of flexibility, and Runkel index, respectively. It is concluded that only M. ferox and M. madeirense can be recommended for papermaking.     

The impact of natural and artificial weathering on the visual,colour and structural changes of seven tropical woods

This study investigates the effects of wood weathering on changes in its macroscopic and colour characteristics in connection with changes in its molecular and anatomical structure. Seven hardwoods suitable for outdoor architecture—bangkirai, cumaru, cumaru rosa, ipé, jatobá, kusia, and massaranduba—were exposed to the exterior out of ground contact for 1–36 months according to EN 927-3, and for 1–12 weeks in Xenotest with water spraying according to partly modified EN 927-6. With prolonged weathering, the following changes occurred in the top surfaces of all tropical woods: (1) visual—creation of longitudinal macro-cracks, (2) spectrophotometry and CIE-L ^? a ^? b ^? —darkening in exterior exposure mainly due to pollutants, except for ipé, and vice versa lightening in Xenotest, as well as greening and blueing in both modes of exposure, (3) FTIR—faster decrease of guaiacyl than syringyl lignin, absolute decrease of conjugated and unconjugated carbonyl groups in the newly formed lignin-polysaccharide-extractive substrate in the photo-oxidized and washed-out cell walls, and decrease of cellulose crystallinity, (4) SEM—damaging of cell-walls by micro-cracks, and their degradation by thinning. Connections between changes of the individual characteristics of weathered woods, for example, between the colour (ΔE*, etc.) and the molecular structure (carbonyls, etc.), were also determined.     

Characteristics of cricket (<Emphasis Type="Italic">Gryllus bimaculatus</Emphasis>) chitosan and chitosan-based nanoparticles

The field cricket (Gryllus bimaculatus) is commonly consumed as food in different parts of the world. This study was performed to characterize the chitosan extracted from crickets and to assess its potential use to the growing functional market. The degree of deacetylation (DA), Fourier-transform infrared spectra, X-ray diffraction patterns, molecular mass, scanning electron microscopy spectra, and color were measured. Cricket chitosan nanoparticles were prepared, and the optimal conditions were identified. The molecular mass of the cricket chitosan was lower than that of commercial chitosan; however, the DA, FTIR, and XRD spectra were similar. The particle size (208.27 ± 3.47 nm), zeta potential (35.72 ± 1.29 mV), and polydispersity index (PDI: 0.27 ± 0.03) of the cricket chitosan NPs were superior to the commercial. Addition of NaCl reduced the cricket chitosan NPs size up to 15.5%. This finding is a novel trial to prove the availability of the insect chitosan with a low molecular mass as an active carrier source.     

A hybrid approach to detect crack parameters using measured natural frequencies in thin walled angle section steel beams

Present study outlines a hybrid approach using Finite Element Method (FEM)–Response Surface Method (RSM)–Genetic Algorithm (GA) to predict the crack parameters, namely crack position and crack depth ratio with the help of only the measured natural frequencies of cracked thin walled beams. Numerical experimental trials of cracked beams have been conducted based on design of experiment (DOE) approach using an improved Finite element model. The improvement has been achieved by consideration of warping stiffness in cracked angle section beam. Thereafter, regression analysis has been conducted to construct Response Surface Function (RSF). Optimum crack parameters were then calculated using GA by minimizing an objective function which has been formed as the root mean square (RMS) of the residuals between RSFs and measured frequencies. Results of the study indicate that, the proposed approach performs with excellent accuracy and it does not require the response of an uncracked beam as benchmark information.     

Evaluation of solar temperature field under different wind speeds for Shanghai 65 m radio telescope

The Shanghai 65 m radio telescope is currently the largest full range rotatable radio telescope in Asia. Gravity, wind and temperature are the three main factors which may have a bad effect on the reflector’s surface precision. To study the effect of the thermal deformation caused by daily non-uniform temperature fields on the surface precision of the main reflector, both the temperature field and its effect were studied in detail for two typical days (January 15th and July 15th). The method to simulate temperature fields was studied initially, considering heat conduction, solar radiation, shadowing, air convection, sky radiation and ground radiation. Then, an integral parametric thermal finite element model (FEM) of the telescope was established using the ANSYS thermal analysis module. Finally, the effect of non-uniform temperature fields on the surface precision of the main reflector was estimated in terms of the Root Mean Square (RMS) deformation based on temperature transient analysis. The proposed methods and conclusions drawn can provide valuable information for thermal design, thermal monitoring and thermal control of the Shanghai 65 m radio telescope and other similar giant antenna structures.     

Structural optimization of hollow-section steel trusses by differential evolution algorithm

This paper deals with the weight minimization of planar steel trusses by adopting a differential evolution-based algorithm. Square hollow sections are considered. The design optimization refers to size, shape and topology. The design variables are represented by the geometrical dimensions of the cross sections of the different components of the truss, directly involving the size of the structure, and by some geometrical parameters affecting the outer shape of the truss. The topology is included in the optimization search in a particular way, since the designer at different runs of the algorithm can change the number of bays keeping constant the total length of the truss, to successively choose the best optimal solution. The minimum weight optimum design is posed as a single-objective optimization problem subject to constraints formulated in accordance with the current Eurocode 3. The optimal solution is obtained by a Differential Evolutionary (DE) algorithm. In the DE algorithm, a particular combination of mutation and crossover operators is adopted in order to achieve the best solutions and a specific way for dealing with constraints is introduced. The effectiveness of the proposed approach is shown with reference to two case-studies. The analysis results prove the versatility of the optimizer algorithm with regard to the three optimization categories of sizing, shape, topology as well as its high computational performances and its efficacy for practical applications. In particular useful practical indications concerning the geometrical dimensions of the various involved structural elements can be deduced by the optimal solutions: in a truss girder the cross section of the top chord should be bigger than the one of the bottom chord as well as diagonals should be characterized by smaller cross sections with respect to the top and bottom chords in order to simultaneously optimize the weight and ensure an optimal structural behaviour.