工作流技术在ASP公共服务平台中的应用研究*

根据项目特点,建立了适合ASP平台的基于协调理论和反馈机制的扩展活动网络模型,采用XML模式的XPDL规范实现过程定义;然后通过DOM解析XML数据文档和J2EE的技术支持实现了系统的轻量级工作流引擎.详细介绍了系统实现中解决的两个关键问题:事务型操作的处理和并发控制,并提出了基于优先级的锁绑定机制.     

Engineering practice and economic analysis of ozone oxidation wet denitrification technology

SO₂ and NO emitted from coal-fired power plants have caused serious air pollution in China. In this study, a test system for NO oxidation using O₃ is established. The basic characteristics of NO oxidation and products forms are studied. A separate test system for the combined removal of SO₂ and NO_x is also established, and the absorption characteristics of NO_x are studied. The characteristics of NO oxidation and NO_x absorption were verified in a 35 t·h^-1 industrial boiler wet combined desulfurization and denitrification project. The operating economy of ozone oxidation wet denitrification technology is analyzed. The results show that O₃ has a high rate and strong selectivity for NO oxidation. When O₃ is insufficient, the primary oxidation product is NO₂. When O₃ is present in excess, NO₂ continues to get oxidized to N₂O₅ or NO₃. The removal efficiency of NO₂ in alkaline absorption system is low (only about 15%). NO_x removal efficiency can be improved by oxidizing NO_x to N₂O₅ or NO₃ by increasing ozone ratio. When the molar ratio of O₃/NO is 1.77, the NO_x removal efficiency reaches 90.3%, while the operating cost of removing NO_x per kilogram is 6.06 USD (NO₂).     

The dynamic evolution of aggregated lithium dendrites in lithium metal batteries

Lithium (Li) metal anodes promise an ultrahigh theoretical energy density and low redox potential,thus being the critical energy material for next-generation batteries.Unfortunately,the formation of Li den-drites in Li metal anodes remarkably hinders the practical applications of Li metal anodes.Herein,the dynamic evolution of discrete Li dendrites and aggregated Li dendrites with increasing current densities is visualized by in-situ optical microscopy in conjunction with ex-situ scanning electron microscopy.As revealed by the phase field simulations,the formation of aggregated Li dendrites under high current den-sity is attributed to the locally concentrated electric field rather than the depletion of Li ions.More specif-ically,the locally concentrated electric field stems from the spatial inhomogeneity on the Li metal surface and will be further enhanced with increasing current densities.Adjusting the above two factors with the help of the constructed phase field model is able to regulate the electrodeposited morphology from aggregated Li dendrites to discrete Li dendrites,and ultimately columnar Li morphology.The methodol-ogy and mechanistic understanding established herein give a significant step toward the practical appli-cations of Li metal anodes.     

预氧化-铁盐沉淀法处理高浓度含砷废水的试验研究

对某砷化镓半导体企业生产过程中产生的高浓度含砷(As)废水,采用过氧化氢(H2 O2)预氧化结合氯化铁(FeCl3)沉淀法进行处理.研究确定了H2O2的投加量,并考察了Fe与As物质的量比、pH值和反应时间等试验条件对砷去除效果的影响.结果表明,当30％H2 O2用量为1.5 mL/L,Fe与As物质的量比为2.5,pH值为8.0,反应时间为2 h时,废水中的总砷浓度可从884 mg/L降低至0.164 mg/L,达到项目环评要求的0.2 mg/L的排放标准.     

N3-Kethoxal-Based Bioorthogonal Intracellular RNA Labeling

There is growing interest in developing intracellular RNA tools. Herein, we describe a strategy for N₃-kethoxal (N₃K)-based bioorthogonal intracellular RNA functionalization. With N₃K labeling followed by an in vivo click reaction with DBCO derivatives, RNA can be modified with fluorescent or phenol groups. This strategy provides a new way of labeling RNA inside cells.     

CHARAC TERIZATION OF TiAl POWDER PRODUCED BY MECHANICAL ALLOYING

The microstructure,alloying reaction and sintering behavior of the powder produced by Mechanical Al-loying(MA)for 8 h from 64 wt.-% Ti powder and 36 wt.-% Al powder were studied by scanning electronmicroscopy,optical microscopy,X-ray diffractometry,differential scanning calorimetry(DSC)and dilatometry.The mechanically alloyed powder partictes are Ti-Al composite particles.Thus,titanium aluminides can formeasily in the powder through diffusion during heat treatment.It is shown that the sintering behavior of this pow-der,different from the behaviors of TiAl alloy powder and mixed powder of 64 wt.-% Ti powder and 36 wt.-%Al powder,changes from expansion at temperatures below 1000℃ to shrinkage at temperatures above 1000℃.Homogeneously alloyed TiAl material with a density over 96% of the theoretical density can be produced fromthe mechanically alloyed powder by compaction-sintering.     

地聚合物混凝土配比及力学性能研究

混凝土是巷道支护过程中的重要建筑材料,然而混凝土在巷道施工中常常出现质量问题,为了不影响正常生产,需要对其进行修补。地聚合物混凝土凝结时间快,早期强度高,界面结合能力强,耐高温性和抗冻性强,耐腐蚀性良好,具有用作修补材料的潜力。以粉煤灰和矿粉为原料,Na₂SiO₃溶液和NaOH为碱激发剂制备地聚合物胶砂,研究不同的碱激发剂模数（1.0、1.2、1.4）和掺量（10%、15%、20%）对不同龄期胶砂力学性能的影响。结果表明：当碱激发剂模数为1.2,碱掺量为15%时,胶砂强度达到最大值。设计正交试验,研究了不同水胶比（0.45、0.50、0.55）、粉煤灰掺量（30%、50%、70%）和砂率（30%、35%、40%）对不同龄期地聚合物混凝土的工作性能和力学性能的影响。结果表明：粉煤灰掺量对抗压强度影响最为显著,水胶比次之,而砂率对强度发展几乎没有影响。最优的配合比为水胶比为0.50,粉煤灰掺量为50%,砂率为35%。     

粉末冶金法制备云母/羟基磷灰石玻璃陶瓷

为了获得良好的可加工性和生物活性,采用粉末冶金法制备了云母/羟基磷灰石玻璃陶瓷.随着烧结温度的提高,材料的力学性能有所增加.在1100℃下、保温1.5 h可以获得材料的最佳力学性能,其相对密度、抗弯强度和断裂韧性分别为95%、124 MPa和2.1 MPa·m1/2.随着温度的提高,烧结过程中玻璃相的扩散速度加快并填充到剩余的孔隙中,使得材料的相对密度增加,从而提高了材料的抗弯强度.断裂韧性的提高来源于材料中高长径比的云母晶体相互交错的微观结构.     

炼厂硫腐蚀的典型案例分析及解决措施

通过硫在不同温度与环境下对金属材料腐蚀的典型案例分析，简述其腐蚀机理与解决,工对今后炼厂高硫油加工提出进一步建议。