Personalized identification of abdominal wall hernia meshes on computed tomography

An abdominal wall hernia is a protrusion of the intestine through an opening or area of weakness in the abdominal wall. Correct pre-operative identification of abdominal wall hernia meshes could help surgeons adjust the surgical plan to meet the expected difficulty and morbidity of operating through or removing the previous mesh. First, we present herein for the first time the application of image analysis for automated identification of hernia meshes. Second, we discuss the novel development of a new entropy-based image texture feature using geostatistics and indicator kriging. Third, we seek to enhance the hernia mesh identification by combining the new texture feature with the gray-level co-occurrence matrix feature of the image. The two features can characterize complementary information of anatomic details of the abdominal hernia wall and its mesh on computed tomography. Experimental results have demonstrated the effectiveness of the proposed study. The new computational tool has potential for personalized mesh identification which can assist surgeons in the diagnosis and repair of complex abdominal wall hernias.     

MET𝔸P: revisiting Privacy-Preserving Data Publishing using secure devices

The goal of Privacy-Preserving Data Publishing (PPDP) is to generate a sanitized (i.e. harmless) view of sensitive personal data (e.g. a health survey), to be released to some agencies or simply the public. However, traditional PPDP practices all make the assumption that the process is run on a trusted central server. In this article, we argue that the trust assumption on the central server is far too strong. We propose Met _??P, a generic fully distributed protocol, to execute various forms of PPDP algorithms on an asymmetric architecture composed of low power secure devices and a powerful but untrusted infrastructure. We show that this protocol is both correct and secure against honest-but-curious or malicious adversaries. Finally, we provide an experimental validation showing that this protocol can support PPDP processes scaling up to nation-wide surveys.     

Effect of nitrogen,phosphorus and soil and crop residues management practices on maize (Zea mays L.) yield in ultisol of eastern Cameroon

The shortening of fallow period in several areas in tropical Africa has reduced soil fertility and exposed soils to erosion and run-off. Fertilizer application and crop conservation practices are needeed to sustain high crop yield and to conserve the natural resource base for upland crop production in the continent. Field trials were carried out to evaluate the effect of fertilizer application and soil and crop residues management practices on yield of maize (Zea mays L.) planted on a Plinthudult soil at Bertoua, Eastern Cameroon. Maize yields increased significantly with nitrogen and phosphorus fertilizer application. Under the rainfall pattern prevailing in the area, the amount of nitrogen required for maximum yield was higher in the second season. On the other hand, the amount of phosphorus required for maximum yield appeared to decrease with time. The burning of crop residues and weeds prior to planting together with no-till practive gave higher yield of maize than other soil and crop residues management practices.     

Analysis of the packing stage of a viscoelastic melt

The packing stage starts at the end of mold filling. During this stage, additional material is forced into the mold to compensate for the shrinkage during subse-quent cooling. Underpacking results in molded parts with dimensional variation. Overpacking causes flash at the parting lines, stick during ejection, and excess residual stresses resulting in warpage. The packing stage is thus extremely important in the determination of the final quality of the product. Despite its importance, analysis of the packing stage has been relatively ignored, particularly the viscoelastic effect. In this work, the analysis of the isothermal packing stage is presented for a Maxwell fluid. A set of governing equations is derived for a two-dimensional mold and solved using the Galerkin finite element method. In addition to the distribution of velocity and pressure, the model predicts the stresses in the planar direction, which could be used for subsequent calculation of the residual stresses.     

Hepatic Δ9 and Δ6 desaturase activities during the recovery period following carbon tetrachloride poisoningdesaturase activities during the recovery period following carbon tetrachloride poisoning

The liver microsomal Δ⁹ and Δ⁶ desaturase activities have been studied in rats with carbon tetrachloride-induced hepatitis. Immediately after poisoning, significant decreases were observed for both types of desaturase activity. However, recovery kinetics were slower for the Δ⁶ desaturase than for the Δ⁹ desaturase. The activities of NADH-ferricyanide and NADH-cytochrome C reductases, proteins involved in the electron transfers associated with microsomal desaturation, were also measured. There was a fall in both activities after poisoning, but this decrease was less than that of the desaturase activities.     

Modélisation d'un four de calcination du coke de pétrole: II. Simulation du procédé

A one-dimensional steady-state mathematical model has been developed to simulate the process of calcination of petroleum coke in a rotary kiln. A simulation is made to reproduce the operating conditions prevailing during a normal working day, in order to validate the model, and to study the effects of the main process control variables. It has been found that of the energy provided by combustion, 59.5 % comes from hydrogen, 14.6 % from the carbon of the coke bed, 13.8 % from coke dust, 11.3 % from methane and 0.8 % from tar. A comparison with existing models is made to identify eventual similarities between the various kilns under study. It appears that maximum coke temperature occurs at 45 to 55 % of kiln length, while volatile matters evolution takes place between 5 and 60 % of kiln length, measured from feed end.     

Gasification kinetics of oil sands coke

Kinetics of steam gasification of delayed and fluid cokes derived from Athabasca bitumen have been studied in 6.35 cm diameter stirred and fixed bed reactors. Experiments were carried out at atmospheric pressure and at temperatures between 800°C and 930°C. The coke particle size ranged from 0.1 to 3.5 mm, and the steam partial pressure was varied from 15.2 to 60.6 kPa. Scanning electron microscopy, surface area analysis, and mercury porosimetry were employed to relate physical structure changes in the solids to experimental kinetic data. Several kinetic models for gasification were tested with the experimental gasification data. Rate expressions are presented for carbon conversion and for the release of sulphur.     

EFFECT OF NONSOLVENT ADDITIVES ON THE PORE SIZE AND THE PORE SIZE DISTRIBUTION OF AROMATIC POLYAMIDE RO MEMBRANES

In this paper discussions are made on the effect of nonsolvent swelling agents on the average pore size and pore size distributions at the surface of polyamide membranes which result from casting solutions involving above nonsolvent swelling agents.

The size of the polymer aggregate in the film casting solution and the size of polymer network pores are correlated to physicochemical data of ions which constitute the electrolytes used as nonsolvent swelling agents. As such ionic properties the charge density and the free energy of transition of ions from polyamide phase to water phase were considered. The validity of the correlation is limited in a range of casting solution composition where the polymer concentration in the casting solution is close to the limiting concentration of polymer at the phase boundary and the molar ratio of the nonsolvent swelling agent to the amide group involved in the polyamide polymer is equal to or slightly more than 0.7.     

Relationship between chemical degradation and thickness loss of an amine-cured epoxy coating exposed to different UV environments

The relationship between chemical degradation and thickness loss of an unpigmented, non UV-stabilized, crosslinked amine-cured epoxy coating exposed to three UV conditions was investigated. Spin-coated samples having a thickness of approximately 7 μm on an Si substrate were prepared from a stochiometric mixture of a bisphenol A epoxy resin and a tetra-functional amine curing agent. Samples were exposed outdoors and to two accelerated laboratory UV environments. Chemical degradation and thickness loss were measured by transmission Fourier transform infrared spectroscopy (FTIRS) and laser scanning confocal microscopy (LSCM), respectively. In addition, surface roughness and morphological changes were measured by atomic forcemicrosocopy (AFM) and LSCM. Substantial chemical degradation, thickness loss, and morpholocal changes occurred in the exposed films, and the rate of chemical degradation was greater than that due to the thickness loss. This additional chemical loss was attributed to an inhomogeneous degradation process in which nanoscale localized depressions initiate at certain sites on the surface, which then enlarge and deepen with exposure time. The results of this study provide a better understanding of the degradation mechanism and should lead to the development of scientific-based models for predicting the service life of crosslinked amine-cured epoxy coatings. Presented at the 82nd Annual Meeting of the Federation of Societies for Coatings Technology, October 27–29, 2004, in Chicago, IL     

Illuminant Aware Gamut‐Based Color Transfer

This paper proposes a new approach for color transfer between two images. Our method is unique in its consideration of the scene illumination and the constraint that the mapped image must be within the color gamut of the target image. Specifically, our approach first performs a white‐balance step on both images to remove color casts caused by different illuminations in the source and target image. We then align each image to share the same ‘white axis’ and perform a gradient preserving histogram matching technique along this axis to match the tone distribution between the two images. We show that this illuminant‐aware strategy gives a better result than directly working with the original source and target image's luminance channel as done by many previous methods. Afterwards, our method performs a full gamut‐based mapping technique rather than processing each channel separately. This guarantees that the colors of our transferred image lie within the target gamut. Our experimental results show that this combined illuminant‐aware and gamut‐based strategy produces more compelling results than previous methods. We detail our approach and demonstrate its effectiveness on a number of examples.