A Power-Supply Unit for Pulsed Lasers without a Storage Capacitor

A power-supply unit for pulsed lasers that are pumped by low- and medium-power flashlamps with long pump pulses that does not require a capacitive storage unit is described. The pump-pulse duration is limited by the radiation and thermal stability of the active elements and pump lamps. A functional diagram of the power-supply unit and a circuit diagram of its power system are presented. The basic parameters and elements of this unit, as well as the results of using a laser with the described power supply in experiments, are presented.     

Threaded Joints of Slewing Bearings

A method is proposed for the analysis of slewing bearings.     

Producing Polydicyclopentadiene from Lower-Grade Dicyclopentadiene

Russian Engineering Research - Polymer samples based on polydicyclopentadiene produced from Russian dicyclopentadiene are investigated by thermogravimetric analysis and differential scanning...     

Machining of NiTi-shape memory alloys-A review

The emerging trends in the development of advanced smart materials with better unique properties under different environments for a particular application fascinate the researchers and industrialists. Nickel-Titanium based shape memory alloys are exotic materials due to their unique properties such as SME, SE, high damping characteristics, high corrosion and wear resistance and biocompatibility. This article presents an overview of machining processes that can be used to machine the NiTi and its surface induced characteristics such as microhardness, surface roughness, topography, induced layer, residual stress, fatigue and phase transformation. The surface integrity characteristics are discussed for machining of NiTi-SMAs under the category of traditional, non-traditional and micro-machining with the effect of input parameters such as cutting speed, feed, depth of cut, type of lubricant and type of coating material on cutting tool. The conventional machining of NiTi alloys are quite complicated due to high toughness, severe strain hardening, fatigue hardening and distinctive property of NiTi-SMAs such as pseudoelastic and shape memory effect. From this study, non-traditional process is significantly used to machine the NiTi-SMAs due to its better results on surface integrity characteristics. Consequently, future trends are also identified for machining the NiTi-SMAs and to improve the surface integrity characteristics.     

Fabrication and characterization of poly(methyl methacrylate)/CaCu3Ti4O12 composites

Composites comprising Poly(Methyl Methacrylate) (PMMA) and CaCu₃Ti₄O₁₂ (CCTO) via melt mixing followed by hot pressing were fabricated. These were characterized using X‐ray diffraction, thermo gravimetric, scanning electron microscopy, and Impedance analyzer for their structural, morphology, and dielectric properties. Composites were found to have better thermal stability than that of pure PMMA. The composite, with 38 Vol % of CCTO (in PMMA), exhibited remarkably low dielectric loss at high frequencies and the low frequency relaxation is attributed to the space charge polarization/MWS effect. Theoretical models were employed to rationalize the dielectric behavior of these composites. At higher temperatures, the relaxation peak shifts to higher frequencies, due to the merging of both β and α relaxations into a single dielectric dispersion peak. The AC conductivity in the high frequency region was attributed to the electronic polarization. POLYM. ENG. SCI., 54:551–558, 2014. © 2013 Society of Plastics Engineers     

Carbon nanotubes/amorphous carbon composites as high-power negative electrodes in lithium ion capacitors

A nitrogen-rich carbon nanotubes/amorphous carbon (CNT/C) composite was prepared by carbonising a CNT/polyaniline (PANI) composite, and characterised. Scanning electron microscopy and X-ray photoelectron spectroscopy confirmed that the composite retained a mesoporous CNT structure as its backbone, whilst the nitrogen-rich PANI-derived carbon formed a thin amorphous coating on the CNT surface. Electrochemical characterisation of the CNT/C composite indicated that it had nearly double the reversible Li⁺ intercalation capacity (390 vs. 219 mAh g^?1) and 39 % less irreversible capacity (622 vs. 1,015 mAh g^?1) than the pristine CNT. The CNT/C composite showed exceptionally high rate capability with a de-intercalation capacity of 81 mAh g^?1 at a very high charge/discharge rate of 60 C (time taken for charge or discharge is 1 min) (1 C = 1 h charge or discharge), whereas the pristine CNT delivered 53 mAh g^?1 at this C-rate. By comparison, the rate capabilities of conventional graphite (N3 and SLP30) were very poor above 5 C (~17 mAh g^?1 at 5 C). Both the pristine CNT and CNT/C composite showed an excellent cyclability at 1 C charge/discharge over 600 cycles. The CNT/C composite maintained a fairly stable capacity of ~200 mAh g^?1 after 600 cycles, whilst the commercial graphite showed a steady and significant decrease in de-intercalation capacity; reaching <70 mAh g^?1 after 600 cycles.     

Brassica Plant Responses to Mild Herbivore Stress Elicited by Two Specialist Insects from Different Feeding Guilds

Compensation growth and chemical defense are two components of plant defense strategy against herbivores. In this study, compensation growth and the response of primary and secondary metabolites were investigated in Brassica rapa plants subjected to infestation by two herbivores from contrasting feeding guilds, the phloem-feeding aphid Brevicoryne brassicae and the leaf-feeding caterpillar Pieris brassicae. These specialist herbivores were used at two different densities and allowed to feed for seven days on a young caged leaf. Changes in growth rates were assessed for total leaf area and bulb mass, whereas changes in primary and secondary metabolites were evaluated in young and mature leaves, roots, and bulbs. Mild stress by caterpillars on young plants enhanced mean bulb mass and elicited a contrasting regulation of aliphatic and indolic glucosinolates in the leaves. In contrast, mild stress by aphids enhanced leaf growth and increased glucosinolate concentrations in the bulb, the most important storage organ of B. rapa. A similar mild stress by either herbivore to older plants did not alter plant growth parameters or concentrations of the metabolites analyzed. In conclusion, Brassica plant growth was either maintained or enhanced under mild herbivore stress, and defense patterns differed strongly in response to herbivore type and plant development stage. These results have implications for the understanding of plasticity in plant defenses against herbivores and for the management of Brassica rapa in agroecosystems.     

Silane treatment of magnetite filler and its effect on the properties of magnetite-filled epoxy thin-film composites

Surface modification of magnetite by 3-aminopropyltriethoxysilane coupling agent (3APTES) at different percentages (5, 10, and 20 wt%) with variable treatment times (3, 5, and 7 h) was performed. The effects of these two variables on the properties of magnetite-filled epoxy thin-film composite were investigated. Treated composites exhibited higher saturation magnetization, storage modulus and T _g than untreated composites. Increasing 3APTES amount associated with increasing treatment time improved both the interfacial adhesion of magnetite filler matrix and the properties of treated composites. However, using a comparison system at a fixed treatment time, the system treated with a higher concentration of 3APTES exhibited lower saturation magnetization than that treated with a lower concentration. This result can be attributed to the thick coating on the filler surface that acted as a non-magnetic mass to the total sample volume and subsequently reduced the magnetization efficiency.     

Drying dynamics of polymers films by an interferometric technique

We analyze a simple laser reflectivity measurement as a tool to monitor the drying kinetics of transparent polymer films. The reflectivity signal of a laser beam at normal incidence shows oscillations due to interference arising from multiple reflection of the laser light within the drying film. We develop a model to interpret the reflectivity curves in terms of time evolving refractive indices at the top and bottom of the film. We present results of the drying kinetics of transparent alkyd films on a glass substrate of high refractive index. Data shows a clear hallmark indicating the evolution of the crosslinking process. From the reflectivity curves, the time evolution of the refractive indices at the top and bottom is obtained. Assuming a linear-gradient of the refractive index along the depth of the film the average refractive index and consequently the film thickness as a function of time are estimated. Clear features in the time evolution of the refractive indices and thickness, correlate well with qualitative “dust”, “touch” and “fingerprint” drying times. Additionally, we present some preliminary results for water based latex binders, where scattering of light is present, showing that this simple optical technique could be extended for studying latex film formation.