Fe-Ni-Si基奥氏体时效合金的马氏体相变和形状记忆效应

It is well known that the morphologies of the α martensite formed from the γ phase in ferrous alloys are classified into five types of lath, butterfly, (225)A type plate,lenticular and thin-plate. Among those α martensites, onlythe thinplate martensite, which is characterized by containing a high density of transformation twins, has a potential of exhibiting a perfect shape memory (SM) effect.Recently the present authors found in Fe-Ni-Si alloys that the thin-plate martensite is formed by the introduction of fine and coherent γ-(Ni,Fe)3Si particles with a L12 ordered structure in the austenite matrix due to ausaging. In the present study, the SM properties of the ausaged Fe-Ni-Si alloys with the thin-plate martensite are investigated by a conventional bending-test. The effects of the addition of Co to the Fe-Ni-Si alloys on the martensitic transformation and the SM properties are also investigated. It is shown that while the ausaged Fe-Ni-Si ternary alloys exhibit an imperfect SM effect due to reverse transformation from stress-induced thin-plate martensite to austenite, the SM properties are improved by the addition of Co. An almost perfect SM effect is confirmed in the Fe-Ni-Si-Co alloys by heating to 1 100 ℃ after deformation at -196 ℃.     

The distributed constraint satisfaction problem: formalization andalgorithms

We develop a formalism called a distributed constraint satisfaction problem (distributed CSP) and algorithms for solving distributed CSPs. A distributed CSP is a constraint satisfaction problem in which variables and constraints are distributed among multiple agents. Various application problems in distributed artificial intelligence can be formalized as distributed CSPs. We present our newly developed technique called asynchronous backtracking that allows agents to act asynchronously and concurrently without any global control, while guaranteeing the completeness of the algorithm. Furthermore, we describe how the asynchronous backtracking algorithm can be modified into a more efficient algorithm called an asynchronous weak-commitment search, which can revise a bad decision without exhaustive search by changing the priority order of agents dynamically. The experimental results on various example problems show that the asynchronous weak-commitment search algorithm is, by far more, efficient than the asynchronous backtracking algorithm and can solve fairly large-scale problems     

Experimental investigation and thermodynamic calculation of the phase equilibria in the Co-Nb-Ta ternary system

The isothermal sections of the Co-Nb-Ta ternary system at 900 °C, 1000 °C, 1100 °C, 1200 °C, 1300 °C have been experimentally determined by electron probe microanalysis (EPMA) and X-ray diffraction (XRD) techniques on the equilibrated alloys. On the basis of the experimental data investigated in the present work, the phase equilibria in the Co-Nb-Ta system has been thermodynamically assessed by using CALPHAD (CALculation of PHAse Diagrams) method, and a consistent set of the thermodynamic parameters leading to reasonable agreement between the calculated results and experimental data was obtained.     

Kinetic arrest behavior in martensitic transformation of NiCoMnSn metamagnetic shape memory alloy

High-field magnetic measurements were carried out in order to investigate behaviors of field-induced reverse martensitic transformation and kinetic arrest of NiCoMnSn metamagnetic shape memory alloy. In the thermomagnetization curves, it was confirmed that the reverse martensitic transformation temperature decreases 67 K by applying magnetic field of 5 T, while in the magnetic field cooling process under 5 T, martensitic transformation does not occur down to low temperatures. Equilibrium magnetic field, defined from the critical magnetic fields of the metamagnetic evidence in the magnetization curves, exhibits almost constant below about 100 K, suggesting that the entropy change becomes zero, which is considered to cause kinetic arrest behavior.     

Evaluation of three-dimensional effects in short deep beams using a rigid-body-spring-model

Three-dimensional (3-D) effects in short deep beams without stirrups that failed in shear were investigated experimentally and analytically. Two deep beams with a shear span to depth ratio (a/d) of 0.5 and with different beam widths were tested. The effect of beam width on load-carrying capacity, failure mode, crack pattern and 3-D behavior was investigated, and shape effect due to beam width was clarified. In addition, the beams were analyzed by the 3-D rigid-body-spring model (RBSM). RBSM is a discrete form of modeling that presents realistic behavior from cracking to failure, and 3-D RBSM is applicable to simulate 3-D behavior as well as the confinement effect of concrete. Analytical results in terms of load–displacement curves and crack pattern are compared with the experimental results. Three-dimensional deformations, strut widths and cross-sectional stress distribution are investigated analytically and compared with the experimental results to determine 3-D behavior in detail. The 3-D effects in short deep beams are clarified.     

Development of Motor Model of Rotor Slot Harmonics for Speed Sensorless Control of Induction Motor

This paper proposes a novel mathematical dynamic model to represent the steady‐state and transient‐state characteristics of rotor slot harmonics of an induction motor for sensorless control. Although it is well known that the rotor slot harmonics originate from the mechanical structure of the induction motor, a mathematical model that describes the relationship between the stator/rotor currents of the induction motor and the slot harmonics has not yet been proposed. Therefore, in this paper, a three‐phase model of the induction motor that depicts the rotor slot harmonics is developed by taking into consideration the magnetomotive force harmonics and the change in the magnetic air gap caused by the rotor slots. The validity of the proposed model is verified by comparing the experimental results and the calculated values. © 2013 Wiley Periodicals, Inc. Electr Eng Jpn, 186(3): 63–74, 2014; Published online in Wiley Online Library ( wileyonlinelibrary.com ). DOI 10.1002/eej.22478     

Novel repeated batch operation for flash fermentation system: Experimental data and mathematical modelling

A novel repeated batch operation mode was proposed for ethanol fermentation, where the fermenter beer was periodically exchanged between the fermenter with biomass recycle and the distillation unit, to promote the selective removal of ethanol. Using the mathematical model developed, as based on the experimental results, the optimal operation of the proposed method was shown to attain high performance, with a productivity of about 12 g dm⁻³ h⁻¹ and a product concentration of 400 g dm⁻³.     

Network copolyesters from benzenepolycarboxylic acids and 1,6-hexanediol

Network copolyesters were prepared from trimesic (Y), pyromellitic (X) or mellitic (Y_H) acids and 1,6-hexanediol (6G). Prepolymers prepared by meltpolycondensation were cast from dimethylformamide solution and postpolymerized at 260°C for 6h to form a network. The resultant films were transparent, flexible and insoluble in any organic solvents. Degree of reaction estimated from the infrared absorbance of ester and methylene groups was almost the same for all films, 94–96%. X-ray diffraction intensity curves and densities showed that the ordering of networks was decreased by the copolymerization, which was remarkable for 6G–X/Y_H copolymer films and was consistent with the higher decreases of heat-distortion temperature for these copolymer films. The copolymerization also caused decrease of thermal stability, tensile properties and alkali resistance and increase of dye absorption.     

Co40Ni33.5Al26.5合金马氏体相变、磁性与淬火温度的关系

Co-Ni-Al合金不仅可以作为铁磁性形状记忆合金,也是传统和高温形状记忆合金的候选材料,本文通过金相显微分析,DSC和VSM方法,研究了Co40Ni33.5Al26.5合金马氏体相变和Curie点随淬火温度变化的情况,结果发现该合金马氏体相变温度和Curie点与淬火温度成正比关系.马氏体相变的4种温度,即Ms、Mf、As和At基本平行变化,淬火温度每升高10℃,马氏体相变温度升高8～9℃,而Curie点升高6～7℃.其马氏体相变温度和Curie点随淬火温度的变化与基体相β的成分变化有关,β相中Al的含量随淬火温度升高而降低,因而马氏体相变温度和Curie点升高.并且发现随着淬火温度升高,Co40Ni33.5Al26.5合金马氏体相的磁晶各向异性有减弱的倾向.     

Silicon-29 solid-state nuclear magnetic resonance spectroscopy of composite interfaces

The types of structures and bonds that are formed with silicons in the composite interface were studied using ²⁹Si cross-polarization/magic angle sample spinning (CP/MAS) nuclear magnetic resonance spectroscopy (NMR). The change in mobility of silane coupling agent bonded to silica, as compared with bulk hydrolyzed silane coupling agent, can be monitored by the change in line width and the shift of resonances to higher fields, as well as by the change in the silicon-proton cross-polarization time T_SiH. In the silane coupling agent-matrix resin interface, the T_SiH values reflect the change in mobility as a function of the concentration and degree of hydrolysis of the silane coupling agent. It has been demonstrated that quantitative measurements of T_SiH can be used to investigate relative mobilities.