Visible Light Irradiation of [60]Fullerene Causes Killing and Initiation of Transformation in Balb/3T3 Cells

Abstract

Cell transformation in vitro is a model of carcinogenesis in vivo. Two-stage transformation assay increases the sensitivity of cells to chemicals and permits detection of carcinogens acting as initiating agents. [60]Fullerene (C₆₀) was cytotoxic in BALB/3T3 cells when it was irradiated by visible light, but not without light irradiation. Under conditions when C₆₀ was cytotoxic, it acted as an initiating agent for cell transformation, but it did not act as a complete transforming agent. the initiating activity of visible-light-irradiated C₆₀ was statistically significant in a modified two-stage transformation assay including a procedure for replating cells treated by C₆₀ and light, but it was equivocal in the standard two-stage transformation assay.     

Total reflection X-ray spectroscopy as a rapid analytical method for uranium determination in drainage water

Uranium concentrations in drainage water are typically determined by α-spectrometry. However, due to the low specific radioactivity of uranium, the evaporation of large volumes of drainage water, followed by several hours of measurements, is required. Thus, the development of a rapid and simple detection method for uranium in drainage water would enhance the operation efficiency of radiation control workers. We herein propose a novel methodology based on total reflection X-ray fluorescence (TXRF) for the measurement of uranium in contaminated water. TXRF is a particularly desirable method for the rapid and simple evaluation of uranium in contaminated water, as chemical pretreatment of the sample solution is not necessary, measurement times are typically several seconds, and the required sample volume is low. We herein employed sample solutions containing several different concentrations of uranyl acetate with yttrium as an internal standard. The solutions were placed onto sample holders, and were dried prior to TXRF measurements. The relative intensity, otherwise defined as the net intensity ratio of the Lα peak of uranium to the Kα peak of yttrium, was directly proportional to the uranium concentration. Using this method, a TXRF detection limit for uranium in contaminated water of 0.30 µg/g was achieved.     

Preparations and tribological properties of soft-metal/DLC composite coatings by RF magnetron sputter using composite targets

This work reports the characteristics and tribological properties of both Ag/DLC nanocomposite coatings (RF-Ag-DLC) and Cu/DLC nanocomposite coatings (RF-Cu-DLC) with hydrogen-free DLC matrix deposited by RF magnetron sputtering using a concentric composite target (CCT). The CCT consisted of a C base target and metal tablet, and the tablet was located on the center of the base target concentrically where the etching rate by Ar ions is extremely low. By changing the diameter of Ag or Cu tablets in CCT, RF-Ag-DLC with an Ag concentration ranging from 6 to 65 at.% and RF-Cu-DLC with Cu concentration ranging from 7 to 75 at.% can be prepared. These coatings show a granular structure having Ag or Cu nano-crystals with a diameter ranging from 5 to 10 nm dispersed homogeneously in the hydrogen-free DLC matrix. The friction coefficient of DLC varied depending on the species and content of metal. The transition of the friction coefficient became stable when metal-rich tribofilms formed on the counterfaces.     

Preparation and mesostructure control of highly ordered zirconia particles having crystalline walls

Mesostructured zirconia particles having monoclinic-type crystalline walls were prepared using a low-temperature crystallization technique. Crystalline zirconia particles with highly-ordered mesostructures were obtained through the sol–gel process of zirconium sulfate tetrahydrate at 333 K in the presence of molecular self-assemblies of cetyltrimethylammonium bromide (CTAB) or mixtures of CTAB and anionic molecules such as sodium dodecyl sulfate and sodium p-toluenesulfonate. Variations in the molar ratios of CTAB and the chemical species of anionic molecules led to the variations in the periods of highly-ordered zirconia having crystalline walls. Calcination of the mesostructured zirconia particles prepared using templates consisting solely of CTAB yielded crystalline mesoporous zirconia particles.     

Improved electrochemical activity of LiMnPO4 by high-energy ball-milling

Olivine lithium manganese phosphate (LiMnPO₄) becomes research focus because of its high energy density and improved thermal stability. However, its application in lithium ion batteries suffers severely from poor electrochemical activity due to low conductivity and structural instability upon the charge and discharge process. By applying a high-energy ball-milling method we succeed in improving the capacity delivery and rate capability. LiMnPO₄ materials ball-milled without or with acetylene black are able to deliver a high capacity of 135 and 127 mAh g⁻¹, respectively, more than 50% greater than the pristine one. Particularly, the latter also shows an improved discharge plateau and stable cyclability. High-energy synchrotron radiation X-ray diffraction (XRD), scanning electron microscopy (SEM), Raman spectroscopy, laser particle analysis, and galvanostatic charge and discharge are employed to understand the effect of ball-milling on the LiMnPO₄ material.     

Laser brazing of a dissimilar joint of austenitic stainless steel and pure copper

In many industries, there are applications that require the joining of stainless steel and copper components; therefore, the welding of dissimilar stainless steel/copper joints is a common process. For this investigation, the optimal brazing conditions and suitable filler metals for laser brazing of stainless steel/copper lap joints were studied. Tensile shear force increases with increases in the laser spot diameter or in the laser irradiation angle, which is associated with increased bonding width; however, as bonding width approaches 2 mm, tensile shear force reaches a saturated value due to fracturing at the HAZ of the Cu base plate. In order to obtain joints with high tensile shear strength, laser brazing was optimized by using Cu–Si-based filler metal under the following conditions: laser power, 4 kW; spot diameter, 3 mm; laser irradiation angle, 80°; irradiation position shift, 0.6 mm; brazing speed, 0.30 m/min; and filler metal feed speed, 0.30 min. Concerning filler metals, it was found that the Ni–Cu type showed relatively large tensile shear force even at high welding speeds in comparison with those of the Cu–Si, Cu, Cu–Ni, Ni–Cu and Ni types, respectively.     

离子筛MnO_2·0.4H_2O的固相法制备及特性研究

以单水氢氧化锂和四氧化三锰为原料,用固相法制备出锂离子筛锰酸锂,改变n(锂)/n(锰)之后,用同样的方法制备出另一物质Li1.33Mn1.67O4,经硝酸洗涤脱锂后制备了锂离子筛MnO2·0.4H2O。测定了酸洗时前驱体的锂洗脱率、锰溶损率,研究了锂离子筛MnO2·0.4H2O的饱和吸附量、稳定性、pH滴定曲线。结果表明,前驱体Li1.33Mn1.67O4经硝酸二次酸洗后,锂洗脱率和锰溶损率分别为62.7%和6.0%。在含0.1 mol/L氢氧化钠和10 mmol/L氯化锂的溶液中,经固相法制备的锂离子筛MnO2·0.4H2O对锂离子的饱和吸附量达到24.6 mg/g,并且具有较好的稳定性,pH滴定曲线表明锂离子筛对锂离子具有很好的选择性。     

Network copolyesters from benzenepolycarboxylic acids and 1,6-hexanediol

Network copolyesters were prepared from trimesic (Y), pyromellitic (X) or mellitic (Y_H) acids and 1,6-hexanediol (6G). Prepolymers prepared by meltpolycondensation were cast from dimethylformamide solution and postpolymerized at 260°C for 6h to form a network. The resultant films were transparent, flexible and insoluble in any organic solvents. Degree of reaction estimated from the infrared absorbance of ester and methylene groups was almost the same for all films, 94–96%. X-ray diffraction intensity curves and densities showed that the ordering of networks was decreased by the copolymerization, which was remarkable for 6G–X/Y_H copolymer films and was consistent with the higher decreases of heat-distortion temperature for these copolymer films. The copolymerization also caused decrease of thermal stability, tensile properties and alkali resistance and increase of dye absorption.