Impingement heat transfer by jet issuing from a cross-shaped nozzle

Heat transfer characteristics and flow patterns were measured over a plate for various separation distances between the nozzle exit and target plate when air issues from a sharp-edged cross-shaped nozzle and impinges on a plate. The local heat transfer coefficients in the radial direction for different circumferential positions were calculated using the wall temperatures measured by means of thermocouples, and flow patterns were observed using an oil-titanium IV oxide method. The isotherms of the infrared images were also measured using an infrared radiometer with a two-dimensional array of indium-antimony (InSb) sensors. The geometric axes were switched as a result of the self-induced velocity of a vortex filament; the convex corners became flat and the concave corners generated outward ejection. The distributions of the iso-heat transfer coefficient contours correspond well to the flow pattern and the isotherm contours. These contours extended diagonally and demonstrated the St. Andrew's cross pattern for short separations, subsequently changing to an octagonal pattern, and then becoming circular at large separations. The correspondence of the heat transfer characteristics to the flow behavior, as well as the heat transfer mechanism are also described. © 1998 Scripta Technica, Heat Trans Jpn Res, 27(3): 192–204, 1998     

Network copolyesters from benzenepolycarboxylic acids and 1,6-hexanediol

Network copolyesters were prepared from trimesic (Y), pyromellitic (X) or mellitic (Y_H) acids and 1,6-hexanediol (6G). Prepolymers prepared by meltpolycondensation were cast from dimethylformamide solution and postpolymerized at 260°C for 6h to form a network. The resultant films were transparent, flexible and insoluble in any organic solvents. Degree of reaction estimated from the infrared absorbance of ester and methylene groups was almost the same for all films, 94–96%. X-ray diffraction intensity curves and densities showed that the ordering of networks was decreased by the copolymerization, which was remarkable for 6G–X/Y_H copolymer films and was consistent with the higher decreases of heat-distortion temperature for these copolymer films. The copolymerization also caused decrease of thermal stability, tensile properties and alkali resistance and increase of dye absorption.     

Structural characterization of glycopeptides by N-terminal protein ladder sequencing

High-sensitivity and high-throughput mass spectrometry (MS) has become an important tool for characterizing glycopeptides. Here, we analyzed synthetic O-linked glycopeptides using matrix-assisted laser desorption/ionization time-of-flight (MALDI-TOF) MS. First, we applied MALDI-quadrupole ion trap (QIT)-TOF MS, which enables collision-induced dissociation-MSn analysis for fine structural characterization. Subsequent MS/MS of sodium adduct ions selected as precursor ions yielded detailed information about the site of oligosaccharide attachment as well as the carbohydrate and amino acid sequences; however, these MS/MS spectra were very complex. To obtain easily interpretable and simple spectra, we used N-terminal protein ladder sequencing coupled with MALDI-TOF MS. From the extremely simple resulting spectra, we were able to determine the glycosylation sites, amino acid sequences, and oligosaccharide molecular weights of the glycopeptides.     

Global competition and technological transition in electrical,electronic, information and communication engineering: quantitative analysis of periodicals and conference proceedings of the IEEE

This study analysed the technical and publication activities of the Institute of Electrical and Electronics Engineering (IEEE), the most influential academic publisher in engineering. We first constructed an original comprehensive database of periodicals (journal and magazine) and conference proceedings published by the IEEE between 1980 and 2008, which comprised approximately 0.36 million periodical articles and 1.14 million conference articles. We analysed the transitions in technical innovations from two perspectives: trends within (1) individual countries and (2) specialized fields represented in IEEE societies. The number of published periodical articles increased fourfold between 1980 and 2008, while that of published conference articles increased nearly 20-fold in the same period. In particular, the number of conference articles published by China increased dramatically from 2002, exceeding even the number published by the US in 2008. The IEEE has increasingly shifted away from its US-centred origins to literally becoming the ‘electrical and electronics association of the world’. The proportion of articles published by authors in North America, Europe and East Asia has increasingly balanced, thus leading to the formation of a tri-polar structure of IEEE technological activities. This comprehensive analysis of IEEE publications over a period of almost 30 years revealed that with the emergence of more active international competition, ‘glocalisation’ is occurring among publications and research activities of the IEEE. Consequently, quantitative analysis revealed structural changes in global competition and technological transition characterized by five phases.     

Influence of nanoparticle size to the electrical properties of naphthalenediimide on single-walled carbon nanotube wiring

Nanoparticles of N,N'-bis(n-alkyl)tetracarbonatenaphthalenediimide (NDI) were adsorbed on single-walled carbon nanotube (SWNT) wires dispersed on a SiO(2) substrate. The electrical properties were measured along the long axis of the SWNTs, and in all cases through the nanoparticles showed rectification in semiconducting I-V curve. The plateau width of the I-V curve through the NDI nanoparticles on metallic SWNTs decreased as the particle size increased, while the rectification ratio increased. The conduction mechanism was changed from tunneling conduction to Schottky-like conduction and their boundary is at about 3 nm diameter.     

Study of Pt electrode dissolution in H2O2-containing H2SO4 solution using an electrochemical quartz crystal microbalance

Pt electrode dissolution has been investigated using an electrochemical quartz crystal microbalance (EQCM) in H₂O₂-containing 0.5 mol dm⁻³ H₂SO₄. The Pt electrode weight-loss of ca. 0.4 μg cm⁻² is observed during nine potential sweeps between 0.01 and 1.36 V vs. RHE. In contrast, the Pt electrode weight-loss is negligible without H₂O₂ (<0.05 μg cm⁻²). To support the EQCM results, the weight-decrease amounts of a Pt disk electrode and amounts of Pt dissolved in the solutions were measured after similar successive potential cycles. As a result, these results agreed well with the EQCM results. Furthermore, the H₂O₂ concentration dependence of the Pt weight-decrease rate was assessed by successive potential steps. These EQCM data indicated that the increase in H₂O₂ accelerates the Pt dissolution. Based on these results, H₂O₂ is known to be a major factor contributing to the Pt dissolution.     

Electrospinning of nanomaterials and applications in electronic components and devices

Electrospinning of nanomaterial composites are gaining increased interest in the fabrication of electronic components and devices. Performance improvement of electrospun components results from the unique properties associated with nanometer-scaled features, high specific surface areas, and light-weight designs. Electrospun nanofiber membrane-containing polymer electrolytes show improved ionic conductivity, electrochemical stability, low interfacial resistance, and improved charge-discharge performance than those prepared from conventional membranes. Batteries with non-woven electrospun separators have increased cycle life and higher rate capabilities than ones with conventional separators. Electrospun nanofibers may also be used as working electrodes in lithium-ion batteries, where they exhibit excellent rate capability, high reversible capacity, and good cycling performance. Moreover, the high surface area of electrospun activated carbon nanofibers improves supercapacitor energy density. Similarly, nanowires having quasi-one-dimensional structures prepared by electrospinning show high conductivity and have been used in ultra-sensitive chemical sensors, optoelectronics, and catalysts. Electrospun conductive polymers can also perform as flexible electrodes. Finally, the thin, porous structure of electrospun nanofibers provides for the high strain and fast response required for improved actuator performance. The current review examines recent advances in the application of electrospinning in fabricating electronic components and devices.     

Vortex Dynamics in hcp Solid 4He

The peculiar features noted in (Penzev et al. in Phys. Rev. Lett. 101: 065301, 2008) we conjecture are evidence of a vortex fluid state in solid He. We suggest to analyze this state by means of the dynamics of quantized vortices, as used for the tangle of vortices in superfluid turbulence. We introduce parameters of the vortex tangle dynamics, e.g., relaxation time for the drift of lines in parallel to the torsional oscillation axis. We briefly discuss the transition from the supposed vortex fluid state into the supposed supersolid state (Shimizu et al. in Phys. Rev. Lett., arXiv:0903.1326).     

Precipitation Characteristics and Mechanism of Vanadium Carbides in a V-Microalloyed Medium-Carbon Steel

The precipitation characteristics and mechanism of vanadium carbides during isothermal transformation at 650 ℃ in a V-microalloyed medium-carbon steel were investigated through scanning electron microscopy and transmission electron microscopy as well as dilatometry test. Five morphologies of vanadium carbides were found to precipitate at different nucleation sites during the transformation. Two kinds of interphase precipitation form simultaneously in both pro-eutectoid and pearlitic ferrites. The linear arrays of fine interphase precipitates are parallel to the c/a interface, and the fine needles of interphase precipitates are perpendicular to the c/a interface. The vanadium carbides of long or short fibers, coarse particles and fine particles form in both pro-eutectoid and pearlitic ferrites, displaying different precipitation distributions and orientation relationships with ferrite. The precipitation mechanisms of vanadium carbide precipitates with different modes were proposed, and the precipitation sequence of various vanadium carbide precipitates was finally ascertained.