Method to Estimate Thermal Shrinkage Behavior of Glasses

We present a method to estimate the effect of heat treatment on the shrinkage behavior of glasses. As a pre-requisite, sensitivity of the glass density as a function of glass fictive temperature is measured using the sink–float method and the slope of the relationship is used to determine the linear thermal strain proportionality factor. Evolution of the fictive temperature for different temperature–time history is measured using the infrared spectroscopy method and the results are used to estimate the structural relaxation parameters in the temperature range of interest. The overall shrinkage behavior is predicted using the linear thermal strain factor and estimated change in fictive temperature due to the thermal treatment. The predicted shrinkage behavior is observed to be in good agreement with the independent dimensional change measurements performed on large glass sheets that have undergone similar thermal treatments.     

Theoretical considerations on the sensitivities of electron beam resists

A theoretical study has been carried out in order to explain the sensitivities of electron beam and X-ray resists. A preliminary investigation reveals that the behavior of these resists, on irradiation by high energy radiation, may be considered to be the electronically-excited species in the polymer. To elucidate the chemical reactions in the excited states the adiabatic potential curves are calculated by the INDO/S procedure, which considers all the valence electrons and all the singly excited electronic configurations. Polyethylene and polyisobutylene were chosen as representative of crosslinkable and degradable polymers, respectively, since there is a parallelism between the beam sensitivity of resists and the effects of high energy radiation on polymers. Polyisobutylene has many antibonding curves favorable for the main chain scission in the excited states and polyethylene does not except for one improbable state. It was concluded that degradability is explainable by the ease of bond fission in the excited states; the crosslinkability is considered to be nondegradable property.     

A large discrepancy between CPM and ESR defect densities in light-soaked a-Si:H

A large discrepancy between defect densities evaluated by constant photocurrent method (CPM) and electron spin resonance (ESR) is investigated for hydrogenated amorphous silicon (a-Si:H) with various thicknesses in the process of light soaking (LS). It is shown by a computer simulation that the inhomogeneous defect distribution across the film thickness caused by a rather small penetration depth of the white light in the thick film is one of the possible origins of the discrepancy. But various other causes should also bring about the discrepancy, and the problem is still a puzzling one.     

A Microcomputer System for Spatiotemporal Visual Receptive Field Analysis

A microcomputer system was developed to measure visual spatiotemporal receptive fields. The system performs three functions: 1) generation of a binary spatiotemporal white-noise stimulus, 2) acquisition of spike discharges from retinal ganglion cells, and 3) extraction of the linear part of the spatiotemporal receptive flelds by cross correlating the input against the output. We have applied this system to the measurement of the spatiotemporal receptive fields of cat and catfish retinal ganglion cells.     

Some properties of thin aluminium nitride films formed in a glow discharge

The formation of thin AlN films and some of their electrical properties have been investigated. The films were prepared by exposing the surface of evaporated aluminium films to a glow discharge in pure nitrogen gas. It has been confirmed by transmission electron diffraction that the structure of the film is of the wurtzite type, as is that of the bulk material. It was observed that the thickness of the AlN films depends on the voltage of the glow discharge, the distance from the discharge electrode to the films and the treatment time. The electrical properties were measured in the form of a sandwich diode, i.e. Al-AlN-Au. The voltage-controlled negative resistance, which was first discovered in Al-Al₂O₃-metal diodes, has also been observed in this nitride film diode and shows very good reproducibility and stability.     

Bayesian calibration of embankment safety under earthquake loading

This study provides a probabilistic procedure for the back-calculation of factors of safety of embankment slopes during seismic loading. The slope stability is analyzed by the conventional circular arc slip surface method in which the seismic load is introduced in terms of a horizontal body force. The factor of safety of an embankment is inversely estimated using information whether the embankment is still safe or not after the occurrence of an earthquake. In this back-calculation, soil strengths and seismic loads are treated as random variables. This is because, in many actual situations, these two factors are usually uncertain even after the occurrence of an earthquake.The developed procedure is applied to the case records of embankment behavior during the Niigata earthquake of 1964. Six embankments are analyzed. Four of them are damaged embankments while the others are non-damaged. The factors of safety are inversely estimated and they are compared with the state of damage described in the case records.     

Study on corrosion of welded steel for LBE-cooled fast reactors

Lead-bismuth eutectic (LBE) is a candidate coolant for fast reactors. Its physical, chemical and neutronic properties make it a prospect coolant for the reactors. However, corrosion of structure is the main problem of utilizing LBE as a coolant. Compatibility of welded structure with LBE at high temperature should be considered clearly for feasibility of lead-bismuth-cooled fast reactors. This study was preformed to investigate the mechanical properties and corrosion characteristics of the welded ferritic-martensitic (FM) steel, HCM12A, in LBE at 650 °C for 500 h. The welding methods were TIG welding (137 mm/min; 480 W), YAG laser welding (780 mm/min; 287 W) and electron beam welding (1000 mm/min; 60 kW). The oxygen concentration of test environment was maintained at 7 x 10⁻⁷ wt% by injecting Ar-H2-steam gas mixture. Vickers hardness test and SEM/EDX analysis were conducted on the cross section of welded HCM12A. It was found that oxide layer was larger in the weld zones than base metal (BM). However, outer layer was detached on some areas.     

Pressure wave propagation in air-water bubbly and slug flow

Related to nuclear reactor safety problems, such as the loss of coolant accident caused by some small crevasses in nuclear reactor, choked flows after postulated breaks of hot and cold legs of pressurized water reactors and the boiling flow instability in parallel channels, the characteristics of pressure wave propagation were investigated experimentally for the air-water bubbly and slug two-phase flow in a vertical pipe. Pressure wave was generated from the small pressure disturbance by the up-and-down movement of piston in the test section. Air void fraction was up to 0.7 and superficial liquid velocity was up to 1.5 m/s as experimental conditions. The experimental results show that the pressure wave propagation velocity in bubbly flow decreases acutely with the increase of air void fraction from 0 to 0.05. In slug flow, it is constant when the air void fraction is less than 0.5 but increases gradually when the void fraction increases beyond 0.5. The attenuation coefficient of pressure wave increases with the increase of air void fraction in bubbly flow. The dependency of pressure wave propagation velocity on angle frequency ω in air-water flow shows the dispersion characteristic. The propagation velocity and attenuation coefficient increases gradually with the increase of angle frequency. However, the increase vanishes slowly as the angle frequency reaches 250 Hz in bubbly flow. The propagation of pressure wave in bubbly flow is independent of the superficial velocity of fluids in the range of experiment.     

Design study of PbBi- and NaK-cooled small deep sea fast reactors

The liquid lead-bismuth eutectic (PbBi) has good compatibility with water, which is different from sodium. It is expected that the PbBi could be used as a coolant of the deep sea fast reactor (DSFR). Physics analysis of the PbBi-cooled small reactor cores with and without inner control rods performed using the computer program of a neutronics code system (SRAC95) shows that PbBi is suitable for the coolant of small reactors as well as NaK.     

Seismic proof test of a reinforced concrete containment vessel (RCCV): Part 1: Test model and pressure test

In Japan, the Nuclear Power Engineering Corporation (NUPEC), sponsored by the Ministry of Economy, Trade and Industry (METI), has been conducting a series of seismic reliability proving tests using full-scale or close to full-scale models to simulate actual important equipment that is critical for seismic safety of nuclear power plants. The tests are intended to validate the seismic design and reliability with a sufficient margin even under destructive earthquakes. A series of tests was carried out on a reinforced concrete containment vessel (RCCV) for advanced boiling water reactor (ABWR) from 1992 to 1999. A large-scale high-performance shaking table at Tadotsu Engineering Laboratory, the largest in the world, was used for this test. Part 1 reports the test model and the results of pressure and leak tests. Part 2 describes test procedures, input waves and the results of verification tests such as changes of stiffness, characteristic frequency and damping ratio, the failure of the model and the load deflection. Part 3 shows the seismic safety margin that was evaluated from the energy input during the failure test to a design basis earthquake. Part 4 reports simulation analysis results by a stick model with lumped masses.