A hybrid model for a multiproduct pipeline planning and scheduling problem

Brazilian petrobras is one of the world largest oil companies. Recurrently, it faces a very difficult planning and scheduling problem: how to operate a large pipeline network in order to adequately transport oil derivatives and biofuels from refineries to local markets. In spite of being more economical and environmentally safer, the use of a complex pipeline network poses serious operational difficulties related to resource allocation and temporal constraints. The current approaches known from the literature only consider a few types of constraints and restricted topologies, hence they are far from being applicable to real instances from petrobras. We propose a hybrid framework based on a two-phase problem decomposition strategy. A novel Constraint Programming (CP) model plays a key role in modelling operational constraints that are usually overlooked in literature, but that are essential in order to guarantee viable solutions. The full strategy was implemented and produced very adequate results when tested over large real instances.     

A novel ferromagnetic thermo-stent for plaque stabilization that self-regulates the temperature

The purpose of this study is to investigate the vascular wall with a thermally self-regulating, cylindrical stent made of a low Curie temperature ferromagnetic alloy. Physiologic saline was circulated in the silicone model vessel implanted with the stent. The stent-temperature remained nearly constant for variable saline flows, saline temperatures, and magnetic flux densities. Stent implants of this type in human blood vessels could potentially enable thermotherapy and temperature determination without catheterization.     

Study of a Helium Film in 10 μm Porous Glass by Torsional Oscillator in Free Decay Mode

Dissipation and superfluid density of a thin helium film (superfluid transition at temperature T_c=0.88 K), placed in 10 m porous glass are studied as a function of oscillation amplitude or AC amplitude at fixed temperatures near superfluid transition. The measurements are performed using a high-Q torsional oscillator in the free decay mode as well as constant drive mode. Results show decreasing superfluid density with increasing velocity and non-monotonic behavior of the dissipation in the film.     

Numerical prediction of fraction of eutectic phase in Sn−Ag−Cu soldring using the phase-field method

A combination of macroscale solidification simulation and phase-field calculation is employed to predict the volume fraction of the eutectic phase in Sn-4.0 mass% Ag-XCu solder alloys (X=0.5–1.1 mass%). The solidification simulation incorporates the cooling rate in the phase-field simulation. We assume the residual liquid solidifies as eutectic phase when the driving force for the nucleation of Cu₆Sn₅ amounts to a critical value, which is determined based on the experimental data. Though the calculation results depend on the experimental data, the obtained fractions are about 40% for 0.5 mass% Cu and more than 90% for 1.1 mass% Cu alloy, which shows good agreement with the experimental data.     

Preparation of Lanthanum Nickel Oxide-Coated Ni Sheet Anodes and Their Application to Electrolytic Production of (CF3)3N in (CH3)4NF·4.0HF Melt

A new process for electrolytic production of a perfluorinated compound, (CF₃)₃N, using lanthanum nickel oxide-coated Ni sheet anode in the (CH₃)₄NF·4.0HF melt at room temperature, was developed. Thin films of the lanthanum nickel oxides were prepared on Ni sheets by sol-gel coating method using polyvinlylpyrrolidone(PVP). The main components of the thin films were La₂O₃, LaNiO₃, and La₂NiO₄ at 500, 750 and 1000 °C, respectively. The anode performance in the (CH₃)₄NF·4.0HF melt depends greatly on the main component of the thin film, and the LaNiO₃-coated Ni sheet anode gives the best anode performance. The potential of LaNiO₃-coated Ni sheet anode remains constant at 5.9 V during electrolysis at 20 mA·cm⁻² in the (CH₃)4NF·4.0HF melt for 100 h. This is because LaNiO₃ and NiF₃, and/or Ni₂F₅, the latter of which was formed during electrolysis, in the film give a high electronic conductivity to the surface film during electrolysis. The maximum mole fraction of (CF₃)₃N (21.4%) was obtained at 20 mA·cm⁻² in (CH₃)₄NF·4.0HF melt using the LaNiO₃-coated Ni sheet.     

Structure and expression of the tobacco nuclear gene encoding RNA-binding protein RZ-1: the existence of an intron in the 3''-untranslated region

We investigated prolactin (PRL) and growth hormone (GH) secretion during acute and late abstinence following methylphenidate (MP) administration. Ten male patients who were undergoing acute cocaine abstinence and nine control subjects were randomly assigned into one of two possible sequences of MP and placebo, with each experimental condition occurring on two successive days. This procedure was repeated after 7 days for the patients. Baseline measures were analyzed by analysis of variance (ANOVA) with post hoc tests. Measures of MP challenge were analyzed by analysis of covariance (ANCOVA) with baseline as the covariate. Acute abstinence was compared with control values and then to late abstinence. Plasma levels of PRL, GH, and MP were measured along with a measure of clinical symptoms. Patients had higher basal PRL concentrations during acute abstinence compared with controls, and patients showed no difference when compared to themselves after 7 days (late abstinence). Provocation with MP yielded exaggerated PRL and GH responses in patients during acute abstinence compared with control values, and ANCOVA also revealed a significant increase in PRL response during late abstinence compared with acute abstinence. GH was a less sensitive indicator than PRL. Craving was exacerbated by MP during both acute and late abstinence and was possibly increased at late abstinence. This indicates that the perturbation in dopamine regulation persists and may be increased as clinical recovery occurs for most subjective symptoms. Blood pressure changes were variable and interpretation was uncertain.     

Debugging methods in recursive structured FORTRAN

A version of structured FORTRAN named STAR is introduced. STAR allows recursive subroutines. Implementation problems such as parameter passing by value and local variable stacking are discussed. The major difficulty in the preprocessor approach is debugging. We claim that execution profiles are strong debugging aids, and demonstrate how to debug a STAR program at source language level with the clue in the profiles plus assertion statements. We make use of a quicksort program as an example.     

Surface structures of synthetic diamonds

Diamond crystals of about 2 mm in size were grown by the temperature gradient method using Ni, Ni-Fe alloy and Fe as solvent metals. Several characteristic patterns were seen on the surfaces of the grown diamonds and were found to correspond to the texture of the quenched solvent metals. A vague vein-like pattern appeared when Ni was used. The surface patterns became finer with the increase of the content of Fe in Ni-Fe alloy, and when 70 wt% Fe-30 wt% Ni alloy was used, very fine dendritic patterns were seen on all of the faces of diamond in accordance with the symmetries of the lattice. The patterns are formed by the precipitation of carbon atoms in the space of the dendrites of the solvent metals during the quenching process. Lamellar patterns and etch pits were seen when Fe was used. The patterns are formed when Fe dissolves the diamond surfaces to produce Fe₃C during the quenching process.     

Perpendicular anisotropy of evaporated magnetic films

Evidence of the existence of origins of perpendicular anisotropy other than the ordinary magnetostrictive effect is presented with a brief review of other studies. As one of these origins, the effect of the grain boundaries or the microscopic shape effect is discussed. The amount of perpendicular anisotropy observed in the stripped films does not seem capable of explanation by this effect only.     

Nanoliter-sized liquid dispenser array for multiple biochemical analysis in microfluidic devices

We have developed a microdispenser array made of PDMS, in which a number of nanoliter-sized droplets can be accurately dispensed and mixed with the aid of specific channels under pneumatic pressure. In this system, hydrophobic and narrow channels act as a kind of valve and help structural liquid manipulation. Also, by arranging multiple dispensers in parallel, a single injection of liquid becomes sufficient for the preparation of multiple nanoliter-sized aliquots for different reactions. We designed two kinds of microdevices for multiple liquid dispensing and mixing and evaluated their performance and reproducibility, proving them sufficient for quantitative reactions. As a practical application, biochemical analysis of glucose was performed using enzymatic reactions. This liquid dispensing technology can be widely applied in the field of microscale analysis due to its low consumption, small dead volume of reagents and samples, and ease of operation.