gothic code evaluation of alternative passive containment cooling features

Reliance on passive cooling has become an important objective in containment design. Several reactor concepts have been set forth, which are equipped with entirely passively cooled containments. However, the problems that have to be overcome in rejecting the entire heat generated by a severe accident in a high-rating reactor (i.e. one with a rating greater than 1200 MW_e) have been found to be substantial and without obvious solutions. The GOTHIC code was verified and modified for containment cooling applications; optimal mesh sizes, computational time steps and applicable heat transfer correlations were examined. The effect of the break location on circulation patterns that develop inside the containment was also evaluated. The GOTHIC code was then employed to assess the effectiveness of several original heat rejection features that make it possible to cool high-rating containments. Two containment concepts were evaluated: one for a 1200 MW_e new pressure tube light-water reactor, and one for a 1300 MW_e pressurized-water reactor. The effectiveness of various containment configurations that include specific pressure-limiting features has been predicted. The best-performance configurations-worst-case-accident scenarios that were examined yielded peak pressures of less than 0.30 MPa for the 1200 MW_e pressure tube light-water reactor, and less than 0.45 MPa for the 1300 MW_e pressurized-water reactor.     

Synthesis and antimicrobial activities of new water‐soluble bis‐quaternary ammonium methacrylate polymers

New methacrylate monomers containing pendant quaternary ammonium moieties based on 1,4‐diazabicyclo‐[2.2.2]‐octane (DABCO) were synthesized. The DABCO group contains either a butyl or a hexyl pendant group comprising the hydrophobic segment of the monomers and one tether group to the methacrylate moiety. The monomers were homopolymerized in water by using 2,2′‐azobis(2‐methylpropionamide) dihydrochloride (V‐50) as an initiator. The monomers and polymers were characterized by elemental analysis, thermogravimetric analysis (TGA), differential scanning calorimetry (DSC), FTIR, and ¹³C‐NMR. The antimicrobial activities of the corresponding small molecules (bis‐quaternary ammonium monocarboxylates) and polymers were investigated against Staphylococcus aureus and Escherichia coli. Although the small molecules did not show any antimicrobial activity, the polymers were moderately effective against both Gram‐positive and Gram‐negative bacteria. The minimum inhibitory concentration (MIC) values of the polymers with butyl and hexyl hydrocarbon chains against S. aureus and E. coli were found to be 250 and 62.5 μg/mL, respectively. The minimum bactericidal concentration (MBC) value for the polymer with the butyl group was higher than 1 mg/mL, whereas the MBC value for the polymer with hexyl group was found to be 62.5 μg/mL. Thus, an increase of the alkyl chain length from 4 to 6 significantly increased the antimicrobial activity of the polymer. © 2004 Wiley Periodicals, Inc. J Appl Polym Sci 94: 635–642, 2004     

Synthesis and photopolymerization kinetics of new flexible diacrylate and dimethacrylate crosslinkers based on C18 diacid

A series of new di(meth)acrylate monomers was synthesized from the reactions of methyl α-hydroxymethylacrylate (MHMA), ethyl α-hydroxymethylacrylate (EHMA), hydroxyethyl acrylate (HEA) and hydroxyethylmethacrylate (HEMA) with α,ω-C18 diacid chloride. The photopolymerization behavior and reaction kinetics of the synthesized monomers were investigated using photoinitiation with differential scanning calorimetry. The polymerization rates, conversions and kinetic constants for propagation and termination were determined for each of the monomers. The maximum rate of polymerizations of the diacrylate monomers was higher than that of the dimethacrylate monomers and followed the order: HDDA (1,6-hexanediol diacrylate)>HEA-C18>EHMA-C18∼HEMA-C18>MHMA-C18. The total conversions obtained were 78, 75, 72, 64 and 69% for MHMA-C18, EHMA-C18, HEMA-C18, HEA-C18 and HDDA, respectively, indicating comparable or higher conversions for methacrylates despite their lower rates of polymerization. Propagation and termination mechanisms of the monomers were investigated by plotting propagation and termination rate constants as a function of conversion.     

Addition of cashew tree gum to maltodextrin-based carriers for spray drying of cashew apple juice

This study involved an attempt to totally or partially replace maltodextrin DE10 (MD10) by cashew tree gum (CTG) as a drying aid agent in spray drying of cashew apple juice. The objective was to evaluate the impact of drying aid/cashew apple juice dry weight ratio (D/C, ranging from 3 to 5) and degree of replacement of MD10 with CTG (CTG_R, ranging from 0% to 100%) on ascorbic acid retention (AAR), hygroscopicity, flowability and water solubility of spray dried cashew apple juice powder. AAR was increased from 72.90% to 95.46% by increasing D/C from 3 to 5. CTG was shown as a promising maltodextrin replacer, being more effective than the latter to decrease powder hygroscopicity. The most adequate drying conditions (D/C = 5, CTG_R≥50%) resulted in more than 90% of AAR, and produced a powder with good flowing properties and water solubility.     

Synthesis and characterization of in situ anionically polymerized p-aminobenzoylcaprolactam using di-and tri-functional initiator systems

Summary p-Aminobenzoylcaprolactam has been polymerized anionically in a two-step process to produce aramide-amide copolymers. Both drawn fibers and unoriented films may be produced using this method. The samples were characterized using FTIR, solution NMR, thermal analysis, viscosity, and mechanical testing. FTIR and NMR revealed the incorporation of both the aramid and amide linkages into the polymer backbone. TGA results gave a lower decomposition temperature than that of both aramide and nylon 6 materials. Intrinsic viscosities averaged 0.5 dL/g for the drawn copolymer samples polymerized by the di-functional initiator. Light microscopy displayed crystalline domains that did not appear to melt even up to 300°C. Mechanical testing showed that the initial moduli of drawn fiber samples to be in the range of 30–80 MPa, while homopolymers of nylon 6 and p-benzamide possessed values of 25 MPa and 2.70×10³ MPa, respectively.     

Using constraints and their value for optimization of large ODE systems

We provide analytical tools to facilitate a rigorous assessment of the quality and value of the fit of a complex model to data. We use this to provide approaches to model fitting, parameter estimation, the design of optimization functions and experimental optimization. This is in the context where multiple constraints are used to select or optimize a large model defined by differential equations. We illustrate the approach using models of circadian clocks and the NF-κB signalling system.