Synthesis and characterization of monetite and hydroxyapatite whiskers obtained by a hydrothermal method

High temperature hydrothermal syntheses, using calcium nitrate tetrahydrate, sodium dihydrogen phosphate and urea as precursors, and characterization of hydroxyapatite (HAp) whiskers are reported herein. The morphology and chemical composition of the crystals from a monetite to a hydroxyapatite phase were controlled by varying the starting concentrations of the precursors and the solution pH through the amount of urea that is decomposed during heating. X-ray diffraction (XRD) analysis, infrared spectroscopy (IR), scanning electron microscopy (SEM), energy-dispersive X-ray spectroscopy (EDX), transmission electron microscopy (TEM) and high-resolution TEM (HRTEM) were used to investigate the products of the syntheses in order to find the optimum reaction conditions for obtaining the desired morphology and phase composition. Different morphologies ranging from single crystals of monetite through rods and plates of hydroxyapatite with different size distribution to whisker-like single hydroxyapatite crystal were achieved by simply varying the starting concentration of urea. Structural refinement of the hydroxyapatite whiskers confirmed a strong preferential orientation along the c-axis direction of the hexagonal crystal structure, which was significantly different from the usually observed random crystal orientation. TEM and SEM analysis of the apatite whiskers confirmed single crystal structure with the a c-axis orientation parallel to the long axis of the whiskers, with sizes up to 150 μm in length, 10 μm in width and with a thickness of about 300 nm, that grew from the same centre of nucleation, forming flaky-like particles.     

Computing Optimal Diameter-Bounded Polygon Partitions

The minimum -small partition problem is the problem of partitioning a given simple polygon into subpolygons, each with diameter at most , for a given > 0. This paper considers the version of this problem that disallows Steiner points. This problem is motivated by applications in mesh generation and collision detection. The main result in the paper is a polynomial-time algorithm that solves this problem, and either returns an optimal partition or reports the nonexistence of such a partition. This result contrasts with the recent NP-completeness result for the minimum -small partition problem for polygons with holes (C. Worman, 15th Canadian Conference on Computational Geometry, 2003). Even though the running time of our algorithm is a polynomial in the input size, it is prohibitive for most real applications and we seek faster algorithms that approximate an optimal solution. We first present a faster 2-approximation algorithm for the problem for simple polygons and then a near linear-time algorithm for convex polygons that produces, for any > 0, an (+)-small partition with no more polygons than in an optimal -small partition. We also present an exact polynomial-time algorithm for the minimum -small partition problem with the additional constraint that each piece in the partition be convex.     

An Operator Approach to Tangent Vector Field Processing

In this paper, we introduce a novel coordinate‐free method for manipulating and analyzing vector fields on discrete surfaces. Unlike the commonly used representations of a vector field as an assignment of vectors to the faces of the mesh, or as real values on edges, we argue that vector fields can also be naturally viewed as operators whose domain and range are functions defined on the mesh. Although this point of view is common in differential geometry it has so far not been adopted in geometry processing applications. We recall the theoretical properties of vector fields represented as operators, and show that composition of vector fields with other functional operators is natural in this setup. This leads to the characterization of vector field properties through commutativity with other operators such as the Laplace‐Beltrami and symmetry operators, as well as to a straight‐forward definition of differential properties such as the Lie derivative. Finally, we demonstrate a range of applications, such as Killing vector field design, symmetric vector field estimation and joint design on multiple surfaces.     

Influence of solvent and temperature on extraction of phenolic compounds from grape seed,antioxidant activity and colour of extract

This study was aimed to investigate the influence of solvent (water and ethanol in concentration: 50%, 70% and 96%) and extraction temperature (25–80) °C on polyphenols extraction of grape seed (Vitis vinifera L. cv. “Frankovka”) cultivated in Eastern Croatia. The best results were reached using 50% ethanol at 80 °C. The most abundant individual polyphenolic compound was catechin which makes the average of 45.11% of the total phenolic content followed by epicatechin (34.45%), procyanidin B₂ (12.90%), gallic acid (5.34%), gallocatechin (1.58%), epicatechin gallate (1.01%). The antioxidant activity of extracts was determined by DPPH‐method and it was highly dependent on extraction solvent and temperature. The total extractable proanthocyanidins content of extract had the highest positive correlation (r = 0.994) with antioxidant activity, which indicated that these compounds might be the most important antioxidant in examined grape seed extracts. Relationship between phenolic content and colour of extracts was observed.     

Wetting and surface tension measurements on gold alloys

The surface tension and the density of some gold alloys have been measured and their wetting behaviour investigated in relation to different ceramic supports. Relationships between surface tension and density as a function of temperature are proposed.     

Local pH variation as an initial step in bacterial surface-sensing and biofilm formation

The development of surface-associated layers of matrix-embedded microbial populations, called biofilms, is a serious problem in many medical and industrial settings. These contaminations are difficult to eradicate because of the high resistance level acquired by the cells in their particular environment. From the very beginning of the colonization process, modifications of gene expression are observed and could, at least partially, explain biofilm resistance. In order to develop anti-biofilm molecules and surface treatments, it is of pivotal importance to identify the physico-chemical parameters which activate the sensor systems of pioneering microbes when they come into contact with a surface. The aim of our study was to examine the pH variations in the local micro-environment created between the cell layer and the surface after bacteria adhesion. Using an ion-sensitive field effect transistor (ISFET), as a substratum, colonized by a curli hyperproducing strain known to form biofilms, we observed that the evolution of the pH change was significantly different in the micro-compartment in contact with the electrochemical sensor compared to that within the liquid phase.     

Preparation and magnetoelectric properties of NiFe2O4–PZT composites obtained in-situ by gel-combustion method

Magnetoelectric composites of xNiFe₂O₄–(1 ? x)Pb(Zr,Ti)O₃ with x = 2, 5, 10, 20, 30% were prepared by citrate–nitrate combustion using PZT-based template powders. In order to ensure a better connectivity of dissimilar phases, we have used chemical methods for preparation in situ composites, followed by adequate sintering procedure. The structural, microstructural and functional properties of di-phase magnetoelectric composites of NiFe₂O₄–PZT are reported. The XRD analysis is demonstrating the synthesis of pure ferrite phase directly on the ferroelectric templates. An excellent mixing was obtained in the composite powders, as proved by a detailed SEM analysis.The magnetic and dielectric behaviors of the ceramic composites vary with the ratio of the two phases. The dielectric behavior is greatly influenced by the magnetic phase. The magnetoelectric (ME) coefficient was measured as a function of applied DC magnetic field. The maximum ME coefficient (dE/dH) varies from 0.0011 mV/(cm Oe) to 0.5 mV/(cm Oe) with increasing of NF addition.     

Computing global and diffuse solar hourly irradiation on clear sky. Review and testing of 54 models

Fifty-four broad band models for computation of global and diffuse irradiance on horizontal surface are shortly presented and tested. The input data for these models consist of surface meteorological data, atmospheric column integrated data and data derived from satellite measurements. The testing procedure is performed for two meteorological stations in Romania (South-Eastern Europe). The testing procedure consists of forty-two stages intended to provide information about the sensitivity of the models to various sets of input data. There is no model to be ranked “the best” for all sets of input data. Very simple models as well as more complex models may belong to the category of “good models”. The best models for solar global radiation computation are, on equal-footing, ESRA3, Ineichen, METSTAT and REST2 (version 81). The second best models are, on equal-footing, Bird, CEM and Paulescu & Schlett. The best models for solar diffuse radiation computation are, on equal-footing, ASHRAE2005 and King. The second best model is MAC model. The best models for computation of both global and diffuse radiation are, on equal-footing, ASHRAE 1972, Biga, Ineichen and REST2 (version 81). The second best is Paulescu & Schlett model.