Improved compressed sensing reconstruction for $$^{19}$$ F magnetic resonance imaging

Magnetic Resonance Materials in Physics, Biology and Medicine - In magnetic resonance imaging (MRI), compressed sensing (CS) enables the reconstruction of undersampled sparse data sets. Thus,...     

Anticipation of digital patterns

A memristive device is a novel passive device, which is essentially a resistor with memory. This device can be used for novel technical applications like neuromorphic computation. In this paper, we focus on anticipation—a capability of a system to decide how to react in an environment by predicting future states. Especially, we have designed an elementary memristive circuit for the anticipation of digital patterns, where this circuit is based on the capability of an amoeba to anticipate periodically occurring unipolar pulses. The resulting circuit has been verified by digital simulations and has been realized in hardware as well. For the practical realization, we have used an Ag‐doped TiO_2?x‐based memristive device, which has been fabricated in planar capacitor structures on a silicon wafer. The functionality of the circuit is shown by simulations and measurements. Finally, the anticipation of information is demonstrated by using images, where the robustness of this anticipatory circuit against noise and faulty intermediate information is visualized.     

Analysis of TBA‐Based ETBE Production by Means of an Optimization‐Based Process‐Synthesis Approach

The current article presents the extension of a recently developed optimization‐based approach to process synthesis for process intensification. It generates phenomena‐based flowsheet options using superstructure optimization and provides a dedicated translation into equipment‐based flowsheets. The considered case‐study illustrates the application of the method for the analysis of ethyl tert‐butyl ether production, based on the conversion of tert‐butyl alcohol, under consideration of variable configurations of a rector network and a newly introduced pervaporation‐based membrane‐reactor block.     

Quaternäre Metall/Metalloxid‐Katalysatoren als Wandkatalysatoren in Mikroreaktoren für Power‐to‐Gas‐Applikationen mittels kombinatorischer Hochdurchsatzmethoden

Catalysts of quaternary composition have been prepared and tested for the Sabatier process. For catalyst syntheses the following techniques have been used: sol‐gel methods, wet impregnation and incipient wetness impregnation. The Sabatier reaction was carried out at temperatures between 520 K and 670 K, pressures of 15 bar and 30 bar using a mixture H₂:CO₂ of 4:1. Activity screening of the microscale wall catalysts was performed by a custom‐built 10‐fold parallel gas‐flow microreactor setup in sequential operating mode. To analyze the gas phase compositions GC‐FID was used.     

Time-Resolved Soft X-ray Diffraction Reveals Transient Structural Distortions of Ternary Liquid Crystals

Home-based soft X-ray time-resolved scattering experiments with nanosecond time resolution (10 ns) and nanometer spatial resolution were carried out at a table top soft X-ray plasma source (2.2–5.2 nm). The investigated system was the lyotropic liquid crystal C₁₆E₇/paraffin/glycerol/formamide/IR 5. Usually, major changes in physical, chemical, and/or optical properties of the sample occur as a result of structural changes and shrinking morphology. Here, these effects occur as a consequence of the energy absorption in the sample upon optical laser excitation in the IR regime. The liquid crystal shows changes in the structural response within few hundred nanoseconds showing a time decay of 182 ns. A decrease of the Bragg peak diffracted intensity of 30% and a coherent macroscopic movement of the Bragg reflection are found as a response to the optical pump. The Bragg reflection movement is established to be isotropic and diffusion controlled (1 μs). Structural processes are analyzed in the Patterson analysis framework of the time-varying diffraction peaks revealing that the inter-lamellar distance increases by 2.7 Å resulting in an elongation of the coherently expanding lamella crystallite. The present studies emphasize the possibility of applying TR-SXRD techniques for studying the mechanical dynamics of nanosystems.     

Logistics cost analysis of rice straw for biomass power generation in Thailand

The logistics of the fuel supply have a large impact on the economy of a biomass power generation facility, especially for low density biomass fuels like straw. A detailed cost analysis of a typical rice straw logistics process for two baling options in three regions of Thailand shows that the costs for all logistics operations vary from a minimum of 18.75 USD/t for small rectangular bales in the Northern region of Thailand to maximum 19.89 USD/t for large rectangular bales in the North-eastern region. The difference in costs is not very significant due to the higher ownership and operating costs of the equipment for using large rectangular bales; however, the specific fuel consumption cost is substantially lower by around 17.5% and a total transport cost reduction is about 31.5%. Analysis of the logistics economies of scale for projected power plant capacities of 2-35 MW_e showed that each doubling the capacity of the energy facility increases the specific costs of the logistics operations only by around 4% in all regions.     

Optical Detection of Phase Transformations in Steels: An Innovative Method for Time-Efficient Material Characterization During Tailored Thermo-mechanical Processing of a Press Hardening Steel

Metallurgical and Materials Transactions A - With an innovative optical characterization method, using high-temperature digital image correlation in combination with thermal imaging, the local...     

Interplay between upsampling and regularization for provider fairness in recommender systems

User Modeling and User-Adapted Interaction - Considering the impact of recommendations on item providers is one of the duties of multi-sided recommender systems. Item providers are key stakeholders...     

Influence of temperature of thermal treatment on surface densification of spruce

Spruce (Picea abies L. Karst) wood lamellae, thermally treated at 170, 190, 210 and 230 °C were surface densified by compression at a temperature of 150 °C to three degrees of compression. Immediate springback, set recovery, mechanical properties in 3-point flexure, Brinell hardness and density profiles measurements were used to determine the effect of thermal treatment on the properties of surface densified wood. The highest immediate springback occurred in wood specimens thermally treated at the highest temperature (230 °C) and decreased with decreasing thermal treatment temperature. The untreated samples had the highest set recovery, which decreased with the temperature of thermal treatment. The surface densification increased hardness and bending strength. The highest increase was in the case of untreated wood and decreased with the temperature of thermal treatment. The modulus of elasticity (MOE) and modulus of rupture (MOR) of surface densified wood decreased with increasing thermal treatment temperature. The trend was similar for specimens which were thermally treated but not surface densified. Surface densification increased the density of the specimens in the first few millimetres below the surface. The highest density was achieved in untreated specimens and the lowest in specimens thermally treated at the highest temperature.