DRYING RESEARCH AND DEVELOPMENT IN CZECHOSLOVAKIA

This paper provides general information on drying R 6D activities in Czechoslovakia. This survey report lists the main topics in drying according to individual industrial sectors in which drying plays an important role. Drying R 6D carried out in Czechoslovak Universities is also cited. The paper includes an extensive list of references, mainly proceedings of national drying conferences, symposia, and meetings     

Color-tunable up-conversion emission in Y2O3:Yb3+, Er3+ nanoparticles prepared by polymer complex solution method

Abstract

Powders of Y₂O₃ co-doped with Yb³⁺ and Er³⁺ composed of well-crystallized nanoparticles (30 to 50 nm in diameter) with no adsorbed ligand species on their surface are prepared by polymer complex solution method. These powders exhibit up-conversion emission upon 978-nm excitation with a color that can be tuned from green to red by changing the Yb³⁺/Er³⁺ concentration ratio. The mechanism underlying up-conversion color changes is presented along with material structural and optical properties.

PACS

42.70.-a, 78.55.Hx, 78.60.-b     

Effect of preparation route on the microstructure and electrical conductivity of co-doped ceria

Dense Ce_0.8Sm_0.1Gd_0.1O_2?δ electrolytes were fabricated by sintering of CeO₂ solid solutions which were prepared from metal nitrates and NaOH using self propagating room temperature synthesis (SPRT). Three different routes were employed to obtain CeO₂ solid solution powders: (I) hand mixing of reactants, (II) ball milling of reactants and (III) ball milling of Ce_0.8Sm_0.2O_2?δ and Ce_0.8Gd_0.2O_2?δ solid solutions previously prepared by ball milling of corresponding nitrates and NaOH. Density measurements showed that ball milling, which is more convenient than hand mixing, is an effective way to obtain almost full dense samples after presureless sintering at 1550 °C for 1 h. These samples had larger grain size and consequently higher conductivity than the samples obtained by hand mixing. The highest conductivity of 2.704×10^?2 (Ω cm)^?1was measured at 700 °C in a sample prepared by route II. It was found that reduced grain size in samples obtained by hand mixing leads to a decrease in grain boundary conductivity and therefore decrease in the total conductivity. The results showed that mixing of single doped ceria solid solutions improved densification and inhibited grain growth.     

Anionic polymerization of acrylates. XIV. Synthesis of MMA/acrylate block copolymers initiated with ester-enolate/tert-alkoxide complex

Diblock copolymers of methyl methacrylate (MMA) with 2-ethylhexyl, butyl, ethyl or tert-butyl acrylate (EtHA, BuA, EtA, t-BuA) have been prepared by the ligated anionic polymerization initiated with methyl 2-lithioisobutyrate (MIB-Li) in the presence of an excess of Li tert-butoxide (t-BuOLi) in toluene/THF mixture at −60 or −78 °C. The copolymers, prepared at −60 °C, show MWD with a hint of bimodality, indicating partial deactivation of the living PMMA upon addition of acrylic monomer. At −78 °C, the extent of this deactivation is distinctly lower, the formed block copolymers, in particular, poly(MMA-b-EtHA), have unimodal MWD and exhibit tails only in the lower-molecular-weight region. Poly(MMA-b-EtHA)s were extracted with acetonitrile dissolving PMMA; very small parts of the crude products dissolved, whereas prevailing parts remained as solids documenting thus formation of block copolymer in a high yield. Surprisingly, the highest amount of self terminated PMMA was found in block copolymerization of MMA with t-BuA at both the temperatures, the products of which had clearly bimodal MWDs. This finding is shortly discussed on the basis of relatively slow propagation of t-BuA in comparison with EtHA, BuA and EtA.     

The effect of specific β‐nucleation on morphology and mechanical behavior of isotactic polypropylene

The commercial grade of isotactic polypropylene was modified by a specific β‐nucleating agent in a broad concentration range. The supermolecular structure of the specimens prepared by injection molding was characterized by X‐ray scattering and correlated with mechanical behavior. It was found that at a critical nucleant concentration of 0.03 wt % the content of the β‐modification virtually reaches a saturation level. With further addition of the nucleant, the β‐phase content increases only slightly. The long period passes through a distinct maximum at the same nucleant concentration. This singularity in structure remarkably correlates with a minimum of the yield stress and maxima of strain at break and fracture toughness. Such general behavior is also reflected in the correlation between the β‐phase concentration and fracture toughness profiles along the injection‐molded bars. It is suggested that in the critically nucleated material an optimum thickness of the amorphous interlayer with connecting chains between the β‐crystallites is established, rendering the material the highest possible ductility and toughness. © 2002 Wiley Periodicals, Inc. J Appl Polym Sci 85: 1174–1184, 2002     

Inhibition of premature polymerization of cationically polymerizable low viscosity systems

Photocurable inkjet inks based on cationically curable materials are a promising new technology with many advantages and some problems yet to be solved. One of the latter is the long-term stability of liquid inks. Reactive monomers are stable in the dark at room temperature for a long time. When a photoinitiator (iodonium salt) is added, premature gelation takes place within several days, depending on the temperature. Tertiary amine, hindered amine, hindered phenol, a quinone derivative, a sulphur-based antioxidant, beta-carotene and their selected mixtures were tested as potential inhibitors of premature cationic polymerization by being subjected to accelerated ageing at higher temperatures. The influence of additives on photoinitiated polymerization was studied by means of FTIR spectroscopy. The inhibition effect of additives was ascertained by monitoring the changes in viscosity during long-term temperature exposition as well. The system used for the study was a model system containing a cycloaliphatic epoxide monomer, oxetane monomers and a diaryliodonium salt photoinitiator. Amines, in contrast to antioxidants, proved to be effective as premature polymerization inhibitors.     

Ionic polymers with tunable liquid‐crystalline properties

Side‐chain polyesters were synthesized from N‐octyl‐, N‐dodecyl‐ or N‐hexadecyl‐diethanolamine and succinic acid anhydride. These polyesters were then transformed into polyester hydrochlorides by protonation of the amino groups using different amounts of HCl (20–100 mol%). Above 60 mol% the reaction is not quantitative and a degree of protonation of up to 88% is obtained. The structures of the synthesized polyesters and their hydrochlorides were determined by ¹H nuclear magnetic resonance spectroscopy. The thermal properties of the synthesized polyesters and their hydrochlorides were also studied using differential scanning calorimetry in relation to the side‐chain length and the degree of polyester protonation. The polyester with octyl side chains and its hydrochlorides were amorphous liquids at room temperature, while the polyester and polyester hydrochlorides with hexadecyl side chains formed a smectic crystalline phase, S_mB, or its tilted analogues. The polyester with a dodecyl side chain was also an amorphous liquid at room temperature, while its hydrochlorides with various degrees of protonation were smectic liquid crystals, as determined by X‐ray diffraction. By simply varying the degree of protonation the liquid crystal isotropization temperature was increased from 32 °C to 82 °C. Copyright © 2011 Society of Chemical Industry     

Design of Cyclic Peptides Featuring Proline Predominantly in the cis Conformation under Physiological Conditions

Turns are secondary‐structure elements that are omnipresent in natively folded polypeptide chains. A large variety of four‐residue β‐turns exist, which differ mainly in the backbone dihedral angle values of the two central residues i+1 and i+2. The βVI‐type turns are of particular biological interest because the i+2 residue is always a proline in the cis conformation and might thus serve as target of peptidyl prolyl cis/trans isomerases (PPIases). We have designed cyclic hexapeptides containing two proline residues that predominantly adopt the cis conformation in aqueous solution. NMR data and MD calculations indicated that the cyclic peptide sequences c‐(‐D Xaa‐Ser‐Pro‐D Xaa‐Lys‐Pro‐) result in highly symmetric backbone structures when both prolines are in the cis conformation and the D ‐amino acids are either alanine or phenylalanine residues. Replacement of the serine residue either by phosphoserine or by tyrosine compromises this symmetry, but further increases the cis conformation content of both prolines. As a result, we obtained a cyclic hexapeptide that exists almost exclusively as the cis‐Pro/cis‐Pro conformer but shows no cis/trans interconversion even in the presence of the PPIase Pin1, apparently due to an energetically quite favorable but highly restricted conformational space.