Averaging analysis of periodically forced fluid networks

For a lumped parameter model of a flow network driven by a periodic generator, we apply averaging to find an approximate solution and analyze its stability. The approximate solution has three parts: mean flow due to the resistive effects of branches, a time-periodic part due to “inductive” effects, and a mean flow average correction due to the interaction of nonlinear and time varying effects. We present an example that may explain the scenario leading to venous diseases. It is shown that the widening of a branch in a venous network leads to an increase in the AC flow and a decrease in the DC flow through that branch, thus increasing the stress on venous valves, and consequently leading to a further increase in the effective width of the vein.     

Influence of Annealing on the Properties of Explosively Welded Titanium Grade 1—AW7075 Aluminum Alloy Bimetals

Explosive welding of titanium Grade 1 to AW7075 aluminum alloy arranged in parallel setup was performed. The annealing of produced bimetals at the temperatures of 450, 500 and 550 °C for times ranging from 20 to 100 h was carried out after explosive welding. The produced bimetal was characteristic by its wavy interface typical for that bonding process. Increase in the microhardness at the interface was recorded due to work hardening. Delamination of titanium Grade 1 flyer sheet was firstly observed when annealing temperature of 500 °C for 40 h was carried out. Annealing at 550 °C also resulted in delamination of upper sheet. The intermetallic compound (IMC) layer was observed at the interface after annealing of bimetals. The higher the annealing temperature and time, the higher the thickness of continuous IMC layer. The maximum measured thickness of IMC layer averaged 13 µm. Energy dispersive x-ray spectroscopy (EDS) and x-ray diffraction (XRD) analyses revealed that the interface layer is consisted of Al₁₈Ti₂Mg₃ IMC. Microhardness at the interface increased dramatically up to 439 HV0.1 after annealing of bimetal due to the presence of above-mentioned IMC.     

Novel design approach for the creation of 3D geometrical model of personalized bone scaffold

Bone scaffolds provide a structural support for tissue development. Existing bone scaffolds are mainly characterized by complex porous designs whose shortcomings are a low level of permeability for growing tissue, and a difficult design customization. Scaffolds with nucleuses (rods or lattices) as basic elements should improve bone regeneration and enable higher design flexibility. In this paper, we present two new methods for building 3D geometrical models of personalized scaffolds, which are based on method of anatomical features. Methods are demonstrated in the case of scaffold for the mandible bone. This approach greatly reduces the designer effort and time, while enabling easy personalization of scaffolds’ shape and geometry.     

Influence of Rare-Earth Dopants on Barium Titanate Ceramics Microstructure and Corresponding Electrical Properties

In this article, ytterbium and erbium oxides are used as doping materials for barium titanate (BaTiO₃) materials. The amphoteric behavior of these rare-earth ions leads to the increase of dielectric permittivity and decrease of dielectric losses. BaTiO₃ ceramics doped with 0.01–0.5 wt% of Yb₂O₃ and Er₂O₃ were prepared by conventional solid-state procedure and sintered at 1320°C for 4 h. In BaTiO₃ doped with a low content of rare-earth ions (0.01 wt%) the grain size ranged between 10 and 25 μm. With the higher dopant concentration of 0.5 wt%, the abnormal grain growth is inhibited and the grain size ranged between 2 and 10 μm. The measurements of capacitance and dielectric losses as a function of frequency and temperature have been carried out in order to correlate the microstructure and dielectric properties of doped BaTiO₃ ceramics. The temperature dependence of the dielectric constant as a function of dopant amount has been investigated.     

Application of predictive control methods for Radio telescope disk rotation control

Radio telescope (RT) installations are highly valuable assets and during the period of their service life they need regular repair and maintenance to be carried out for delivering satisfactory performance and minimizing downtime. Same down time can be expected during machinery usage. Constant control of telescope rotation angle is done manually using visual inspection of hardware. The accuracy of this procedure is very low, therefore, automation and computer control systems are required. With the growing automation technologies, predictive control can prove to be a better approach than the traditionally applied visual inspection policy and linear control models. In this paper, Irbene Radio telescope RT-16 disk rotation control motors are analysed using control voltage from the converters. Retrieved data from the small DC motor is used for the predictive control approach using two different methods: a neural network trained with Basic Levenberg-Marquardt method and a linear model. A multilayer perceptron network approach is used for prediction of the indicator voltage output which affects the monitoring of the disk rotating angle. Finally, an experimental control system was proposed and installed using National Instruments equipment.     

A case of using the Semantic Interoperability Framework for custom orthopedic implants manufacturing

The efficiency and effectiveness of the daily practice in orthopedic surgery depend on the availability, interoperability and unique access to a wide set of information, related to the patient’s medical record and diagnosis, domain knowledge and available resources and staff. The most important of the tangible resources, needed for the therapeutic or preventive actions are orthopedic implants. In some cases, the implants may be highly complex and customized products, which need to be manufactured (assembled) on basis of the above information in a shortest possible timeframe. In this paper, the case of the custom orthopedic implants manufacturing is described from the perspective of the collaborative enterprising, with special consideration of the interoperability issues of the involved enterprise collaboration. It is shown how the previously developed Semantic Interoperability Framework can be used to improve the efficiency of the manufacturing and other relevant processes.     

Latex-coated polymeric monolithic ion-exchange stationary phases. 1. Anion-exchange capillary electrochromatography and in-line sample preconcentration in capillary electrophoresis

A sulfonated methacrylate monolithic polymer has been synthesized inside fused-silica capillaries of diameters 50-533-microm i.d. and coated with 65-nm-diameter fully functionalized quaternary ammonium latex particles (AS18, Dionex Corp.) to form an anion-exchange stationary phase. This stationary phase was used for ion-exchange capillary electrochromatography of inorganic anions in a 75-microm-i.d. capillary with Tris/perchlorate electrolyte and direct UV detection at 195 nm. Seven inorganic anions (bromide, nitrate, iodide, iodate, bromate, thiocyanate, chromate) could be separated over a period of 90 s, and the elution order indicated that both ion exchange and electrophoresis contributed to the separation mechanism. Separation efficiencies of up to 1.66 x 10(5) plates m(-1) were achieved, and the monoliths were stable under pressures of up to 62 MPa. Another latex-coated monolith in a 250-microm-i.d. capillary was used for in-line preconcentration by coupling it to a separation capillary in which the EOF had been reversed using a coating of either a cationic polymer or cationic latex particles. Several capillary volumes of sample were loaded onto the preconcentration monolith, and the analytes (inorganic anions) were then eluted from the monolith with a transient isotachophoretic gradient before being separated by electrophoresis in the separation capillary. Linear calibration curves were obtained for aqueous mixtures of bromide, nitrite, nitrate, and iodide. Recoveries of all analytes except iodide were reduced significantly when the sample matrix contained high levels of chloride. The preconcentration method was applied to the determination of iodide in open ocean water and provided a limit of detection of 75 pM (9.5 ng/L) calculated at a signal-to-noise ratio of 3. The relative standard deviation for migration time and peak area for iodide were 1.1 and 2.7%, respectively (n = 6). Iodide was eluted as an efficient peak, yielding a separation efficiency of 5.13 x 10(7) plates m(-1). This focusing was reproducible for repeated analyses of seawater.     

Delay compensated control of the Stefan problem and robustness to delay mismatch

This paper presents a control design for the one‐phase Stefan problem under actuator delay via a backstepping method. The Stefan problem represents a liquid‐solid phase change phenomenon which describes the time evolution of a material's temperature profile and the interface position. The actuator delay is modeled by a first‐order hyperbolic partial differential equation (PDE), resulting in a cascaded transport‐diffusion PDE system defined on a time‐varying spatial domain described by an ordinary differential equation (ODE). Two nonlinear backstepping transformations are utilized for the control design. The setpoint restriction is given to guarantee a physical constraint on the proposed controller for the melting process. This constraint ensures the exponential convergence of the moving interface to a setpoint and the exponential stability of the temperature equilibrium profile and the delayed controller in the norm. Furthermore, robustness analysis with respect to the delay mismatch between the plant and the controller is studied, which provides analogous results to the exact compensation by restricting the control gain.     

Effects of thermal annealing as polymer processing step on poly(lactic acid)

Thermal annealing as an additional polymer processing step or post-treatment processing step enables the structural changes of amorphous parts into crystalline parts. This paper investigates the feasibility of thermal annealing at 100°C up to 90?min used as an additional processing step to modify the crystalline structure and the thermo-mechanical stability of poly(lactic acid) (PLA). Moreover, the crystallization ability of PLA has been amended by the addition of 3?wt% of wood flour and kaolin. The values of the degree of crystallinity and lamellar thickness determined by wide-angle-X-ray scattering showed that the thermal annealing of PLA samples modified with nucleating agents was an efficient processing step to increase the final crystallinity of PLA. Moreover, altered crystalline structure helped to improve the thermomechanical stability of PLA.