Catalytic Aerobic Photo‐oxidation of a Methyl Group on a Heterocycle to Produce an Aldehyde via Homolytic C?I Bond Cleavage caused by Irradiation with Visible Light

A new catalytic method was developed for photo‐oxidizing the methyl group on aromatic heterocycles such as benzothiazole, benzoxazole, and quinoline to produce the corresponding aldehyde. This is the first report of the metal‐free catalytic synthesis of benzothiazole‐2‐carboxaldehydes using molecular oxygen as the terminal oxidant.

     

Synthesis of thermoresponsive block and graft copolymers via the combination of living cationic polymerization and RAFT polymerization using a vinyl ether-type RAFT agent

A novel vinyl ether-type RAFT agent, benzyl 2-(vinyloxy)ethyl carbonotrithioate (BVCT) was synthesized for various block copolymers via the combination of living cationic polymerization of vinyl ethers and reversible addition−fragmentation chain transfer (RAFT) polymerization. The novel BVCT–trifluoroacetic acid adduct play an important role to produce well-defined block copolymers, which is both as a cationogen under EtAlCl₂ initiation system in the presence of ethyl acetate for living cationic polymerization and a RAFT agent for blocks by RAFT polymerization. The resulting polymer, poly(vinyl ether)s, by living cationic polymerization had a high number average α-end functionality (≥0.9) as determined by both ¹H NMR and MALDI-TOF-MS spectrometry. In addition, this poly(vinyl ether)s worked well as a macromolecular chain transfer agent for RAFT polymerization. The RAFT polymerization of radically polymerizable monomers was conducted in toluene using 2,2′-azobis(isobutyronitrile) at 70 °C. For example, a double thermoresponsive block copolymer (MOVE₆₁-b-NIPAM₁₅₀) consisting of 2-methoxyethyl vinyl ether (MOVE) and N-isopropylacrylamide (NIPAM) was prepared via the combination of living cationic polymerization and RAFT polymerization. The block copolymer reversibly formed and deformed micellar assemblies above the phase separation temperature (T_ps) of poly(NIPAM) block in water. This BVCT is not only functioned as an initiator, but also acted as a monomer. When BVCT was copolymerized with MOVE by living cationic polymerization, followed by graft copolymerization with NIPAM via RAFT polymerization, well-defined graft copolymers (MOVE_n-co-BVCT_m)-g-NIPAM_x (n = 62–73, m = 1–9, x = 19–214) were successfully obtained. However, no micelle formed in water above T_ps of poly(NIPAM) graft chain unlike the case of block copolymers.     

2 Gb/s 15 pJ/b/chip Inductive-Coupling Programmable Bus for NAND Flash Memory Stacking

An inductive-coupling programmable bus for NAND flash memory access in solid state drive (SSD) is presented. Compared to the conventional SSD, this wireless interface using relayed transmission reduces power consumption to 1/2, I/O circuit-layout area to 1/40, and achieves a data rate of 2 Gb/s in 0.18 ?m CMOS process. In addition, since this wireless interface enables one package to contain 64 chips, the number of packages is reduced to 1/8.     

Development of lateral displacement sensor for real‐time detection of structural damage

We have developed a novel sensor that enables us to measure the relative story displacement of a building structure in real time. This lateral displacement sensor (LDS) is composed of a light‐emitting diode (LED) array, which is fixed on the ceiling, and a position‐sensitive detector (PSD) unit, which is placed on the floor. We optimized the LDS to achieve high accuracy in lateral displacement measurement. The accuracy was evaluated to be 60 µm by conducting shaking table tests. Two LDSs were implemented in an actual building equipped with an active variable stiffness (AVS) system, and the building was vibrated with seismic waveforms by an exciter placed on the rooftop. The seismic displacement of the second floor relative to the first floor was measured using the LDS. Furthermore, the inclination angle of the second floor could be measured using the LDS during the seismic vibration. Using the AVS system, we realized the residual displacement of the second floor without inducing damage to the building, and succeeded in real‐time residual displacement measurement for the first time. These results indicate that the LDS is useful for the health diagnosis of a building structure. © 2011 Institute of Electrical Engineers of Japan. Published by John Wiley & Sons, Inc.     

Analysis of the current distortion factor of a three‐phase,three‐wire system

In a balanced three‐phase system, the three‐phase current distortion factor of three‐phase ac power sources has been expressed by applying the conventional single‐phase current distortion factor, which is defined for a single‐phase system. However, in an unbalanced three‐phase system, it is difficult to express the three‐phase current distortion factor for distorted three‐phase ac currents by means of the conventional single‐phase current distortion factor. For instance, the conventional current distortion factors for three‐phase ac currents are usually different from each other in the unbalanced three‐phase system. To solve the above problem, this paper proposes a novel definition of the three‐phase current distortion factor. The proposed three‐phase current distortion factor is quite effective for the unbalanced three‐phase system as well as the balanced three‐phase system. © 2000 Scripta Technica, Electr Eng Jpn, 131(4): 1–10, 2000     

DC‐linked hybrid generation system with an energy storage device including photovoltaic generation and gas engine cogeneration for residential houses

For the past few years, hybrid generation systems including solar panel and gas cogeneration have been used for residential houses. Solar panels can generate electronic power at daytime but not at night. But the power consumption of residential houses usually peaks in the evening. The gas engine cogeneration system can generate electronic power without such a restriction, and it also can generate heat power to warm up a house or to produce hot water. In this paper we propose a solar panel and gas engine cogeneration hybrid system with an energy storage device, combined by a DC bus. If a blackout occurs, the system still can supply electronic power for special house loads. We propose a control scheme for the system related to the charging level of the energy storage device and the voltage of the utility grid, which can be applied to both grid‐connected and standalone operation. Finally, we report experiments designed to demonstrate system operation and calculations for loss estimation. © 2012 Wiley Periodicals, Inc. Electr Eng Jpn, 182(4): 29–46, 2013; Published online in Wiley Online Library ( wileyonlinelibrary.com ).DOI 10.1002/eej.22321     

Polonium evaporation and adhesion experiments for the development of polonium filter in lead–bismuth cooled reactors

Fundamental experiments were performed to determine the adhesion characteristics of polonium to different metals and to develop a filter for polonium evaporated from neutron-irradiated LBE. The results of the first experiments suggested that adhesion characteristics are almost the same for stainless steel and nickel metal. The results of the preliminary experiments for a polonium filter suggested that stainless steel mesh with thin wires could effectively collect polonium evaporated from neutron-irradiated LBE. In the experiments, stainless steel wire mesh was used, but from the results of adhesion experiment, it is expected that the same effect can be obtained with wire mesh made of other kinds of metal.     

Effects of indium addition to CuAu alloy on phase transformation behaviors

The effects of indium addition to CuAu on the alloy phase transformation behavior were investigated by hardness tests, electrical resistivity measurements, X-ray diffraction and transmission electron microscopy. These established that indium additions lower the critical temperature and stabilize the CuAu II phase at room temperature. Formation of the long period ordered phase produces an age-hardening; although this age-hardening is retarded, the degree of hardening is comparable to that in CuAu. It was noted that the axial ratio increases and the antiphase domain size decreases.