Indole‐based polymer and its silver nanocomposite as advanced antibacterial agents: synthetic path,kinetics of polymerization and applications

Atom transfer radical polymerization of 1‐allylindole‐3‐carbaldehyde (AIC) was studied by employing 2‐bromoisobutyryl bromide as initiator in toluene. It led to controlled radical polymerization of AIC, with an increase of molecular weight along with the conversion of the monomer, and a relatively narrow molar mass distribution was obtained, as determined by gel permeation chromatography. The living nature of poly(1‐allylindole‐3‐carbaldehyde) (PAIC) was confirmed by the chain extension polymerization whereas ¹H NMR analysis showed that the major population of PAIC retained the chain‐end functional group. PAIC and its silver nanocomposite were found to be biologically active against some tested bacterial pathogens. Minimum inhibitory concentration tests revealed that PAIC exhibited antibacterial activity against Staphylococcus aureus, Proteus mirabilis and Klebsiella pneumonae whereas PAIC/Ag nanocomposite showed antibacterial activity against Enterococcus faecalis and K. pneumonae. © 2012 Society of Chemical Industry     

Robust observer based control for plasma glucose regulation in type 1 diabetes patient using attractive ellipsoid method

This paper deals with the design of robust observer based output feedback control law for the stabilisation of an uncertain nonlinear system and subsequently apply the developed method for the regulation of plasma glucose concentration in Type 1 diabetes (T1D) patients. The principal objective behind the proposed design is to deal with the issues of intra‐patient parametric variation and non‐availability of all state variables for measurement. The proposed control technique for the T1D patient model is based on the attractive ellipsoid method (AEM). The observer and controller conditions are obtained in terms of linear matrix inequality (LMI), thus allowing to compute easily both the observer and controller gains. The closed‐loop response obtained using the designed controller avoids adverse situations of hypoglycemia and post‐prandial hyperglycemia under uncertain conditions. Further to validate the robustness of the design, closed‐loop simulations of random 200 virtual T1D patients considering parameters within the considered ranges are presented. The results indicate that hypoglycemia and post‐prandial hyperglycemia are significantly reduced in the presence of bounded (±30% ) parametric variability and uncertain exogenous meal disturbance.Inspec keywords: medical control systems, observers, uncertain systems, nonlinear control systems, robust control, control system synthesis, linear matrix inequalities, feedback, sugar, closed loop systems, diseasesOther keywords: virtual T1D patients, type 1 diabetes patients, closed‐loop simulations, uncertain conditions, post‐prandial hyperglycemia, designed controller, closed‐loop response, controller gains, linear matrix inequality, controller conditions, T1D patient model, control technique, intra‐patient parametric variation, principal objective, plasma glucose concentration, uncertain nonlinear system, robust observer based output feedback control law, attractive ellipsoid method, plasma glucose regulation     

Dynamic process modelling of iron ore sintering

A mathematical model was developed for the iron ore sintering process considering all the major thermochemical phenomena in the system, assuming both the static and moving bed configurations. The model predicted a large number of parameters pertinent to the sintering process including the temperatures of the gas and solid, concentration of various species, amount of solid melted etc. The results were tested against the data existing in literature, and a limited number of pot tests conducted in a pilot plant. Despite high complexity of the problem, the agreement between the experimental and simulated data was reasonably good.     

Alkylation of phenol with tert‐butyl alcohol over a catalyst synthesized from coal fly ash

The alkylation of phenol with tert‐butyl alcohol was carried out in a continuous flow reactor over a catalyst synthesized from fly ash. The activity of the synthesized catalyst was compared with those of other conventional zeolite catalysts such as 13X (NaX) and Hβ. Of all the catalysts tested, zeolite Hβ showed the highest activity in phenol conversion followed by the synthesized zeolite (HZOP‐31). The activity of commercial 13X zeolite was found to be same as that of HZOP‐31. Ce‐exchanged catalyst (CeZOP‐31) showed even better performance than 13X in the alkylation of phenol. The effects of different parameters such as reactant mole ratio, temperature and space velocity on phenol conversion and tert‐butyl phenol selectivity were studied. The effect of mass transfer resistance was found to be negligible within the feed rate range and particle size range studied. The apparent activation energy for the reaction of tert‐butyl alcohol over HZOP‐31 was determined as 30.1 kJ mol^?1. Copyright © 2006 Society of Chemical Industry     

Design and development of long-period grating sensors for temperature monitoring

Long Period Gratings (LPGs) have been developed using carbon dioxide laser in a standard optical fibre. LPGs with a periodicity of 600 μm and grating length of 24 mm have been inscribed on standard single mode fibre. Such gratings have been used in designing temperature sensors and temperature is monitored up to 80°C. The sensitivity of such type of sensor is 0·06 nm/°C where as for standard Fibre Bragg Grating (FBG) it is 0·011 nm/°C. The LPG performance is also evaluated after γ-ray irradiation for total dose of 5 KGy and has not shown any effect on transmission spectrum.     

A framework to identify applications of information technology to improve service quality

More and more organizations are seeking innovative ways to use information technology (IT) for strategic advantage. One way to gain this competitive edge is by differentiating the services provided to customers. This paper provides a framework to identify areas ripe for the implementation of IT to enhance and improve customer service. The framework is based upon the examination of the existing service delivery system of an organization and how applications of IT might change the interfaces among the various players (customers, employees, etc.) in the service delivery system. Further, examples are presented to illustrate how some organizations have achieved superior service quality by creatively utilizing simple IT tools.     

MHD flow over a moving plate in a rotating fluid with magnetic field, Hall currents and free stream velocity

The non-similar boundary layer flow of a viscous incompressible electrically conducting fluid over a moving surface in a rotating fluid, in the presence of a magnetic field, Hall currents and the free stream velocity has been studied. The parabolic partial differential equations governing the flow are solved numerically using an implicit finite-difference scheme. The Coriolis force induces overshoot in the velocity profile of the primary flow and the magnetic field reduces/removes the velocity overshoot. The local skin friction coefficient for the primary flow increases with the magnetic field, but the skin friction coefficient for the secondary flow reduces it. Also the local skin friction coefficients for the primary and secondary flows are reduced due to the Hall currents. The effects of the magnetic field, Hall currents and the wall velocity, on the skin friction coefficients for the primary and secondary flows increase with the Coriolis force. The wall velocity strongly affects the flow field. When the wall velocity is equal to the free stream velocity, the skin friction coefficients for the primary and secondary flows vanish, but this does not imply separation.     

Optimum shapes of tire‐treads for avoiding lateral slippage between tires and roads

Optimum design of tire‐tread sections is an important practical issue. However, useful study of the problem that can suggest a reliable guideline for determining the optimum tread sections had hardly been made in the past. The present paper describes a new analysis of the state of stresses in tire‐tread sections in contact with the road surface, taking special care of the boundary conditions. Based on the analysis, a method is proposed to determine the optimum tread shapes for avoiding lateral slippage between tires and roads. The displacement potential function formulation, an ideal mathematical model for the practical stress problems, has been used in conjunction with finite‐difference method of solution. For the present analysis, lateral slipping in absence of frictional resistance as well as the no‐slip conditions of the tire‐tread contact surface have been considered along with a large number of tread aspect ratios. The present computational approach proves to be a powerful tool for determining the optimum tread shapes for avoiding the lateral slippage of tire‐treads. Copyright © 2005 John Wiley & Sons, Ltd.