Synthesis and structural characterization of an alternating double aquo-bridged and single cyano-bridged polymeric barium–iron complex: {[Ba2(phen)4(H2O)6Fe(CN)6]·Cl·2(phen)·3H2O}n

A new alternating double aquo-bridged and single cyano-bridged polymeric complex {[Ba₂(phen)₄(H₂O)₆Fe(CN)₆]·Cl·2(phen)·3H₂O}_n (1) (phen = 1,10-phenanthroline) has been synthesized and structurally characterized. In the crystal structure the two centrosymmetric [Ba₂(phen)₄(H₂O)₆] units are bridged through two trans CN groups of [Fe(CN)₆]³⁻ ion, which results in the formation of a zig-zag polymeric chain. In each [Ba₂(phen)₄(H₂O)₆] unit, the two Ba centers are joined by double aquo bridges. Both the Ba atoms are 9-coordinated with distorted mono-capped square antiprismatic geometry. An elaborate hydrogen bonding system holds the parallel polymeric chains together.     

Microstructure and mechanical properties of mechanically alloyed and spark plasma sintered amorphous–nanocrystalline Al65Cu20Ti15 intermetallic matrix composite reinforced with TiO2 nanoparticles

Multiphase Al₆₅Cu₂₀Ti₁₅ intermetallic alloy matrix composite, dispersed with 10 wt.% of TiO₂ nanoparticles, has been processed by mechanical alloying, followed by spark plasma sintering under pressure in the temperature range of 623–873 K. Differential scanning calorimetry and X-ray diffraction suggest that equilibrium crystalline phases evolve from the amorphous or intermediate crystalline phases. Transmission electron microscopy shows that the composite sintered at 873 K has partially amorphous microstructure, with dispersion of equilibrium, crystalline, intermetallic precipitates of Al₅CuTi₂, Al₃Ti, and Al₂Cu of 25–50 nm size, besides the TiO₂. The composite sintered at 873 K exhibits little porosity, hardness of 5.6 GPa, indentation fracture toughness in the range of 3.1–4.2 MPa√m, and compressive strength of 1.1 GPa. Indentation crack deflection by TiO₂ particle aggregates causes increase in fracture resistance with crack length, and suggests R-curve type behaviour. The study provides guidelines for processing high strength amorphous–nanocrystalline intermetallic composites based on the Al–Cu–Ti ternary system.     

Contribution of water and cooked rice to an estimation of the dietary intake of inorganic arsenic in a rural village of West Bengal,India

Arsenic contamination of rice plants by arsenic-polluted irrigation groundwater could result in high arsenic concentrations in cooked rice. The main objective of the study was to estimate the total and inorganic arsenic intakes in a rural population of West Bengal, India, through both drinking water and cooked rice. Simulated cooking of rice with different levels of arsenic species in the cooking water was carried out. The presence of arsenic in the cooking water was provided by four arsenic species (arsenite, arsenate, methylarsonate or dimethylarsinate) and at three total arsenic concentrations (50,?250 or 500?µg?l^?1). The results show that the arsenic concentration in cooked rice is always higher than that in raw rice and range from 227 to 1642?µg?kg^?1. The cooking process did not change the arsenic speciation in rice. Cooked rice contributed a mean of 41% to the daily intake of inorganic arsenic. The daily inorganic arsenic intakes for water plus rice were 229, 1024 and 2000?µg?day^?1 for initial arsenic concentrations in the cooking water of 50, 250 and 500?µg?arsenic?l^?1, respectively, compared with the tolerable daily intake which is 150?µg?day^?1.     

Performance and Modeling of the MWIR HgCdTe Electron Avalanche Photodiode

The operation of the mid-wave infrared (MWIR) HgCdTe cylindrical electron injection avalanche photodiode (e-APD) is described. The measured gain and excess noise factor are related to the collection region fill factor. A two-dimensional diffusion model calculates the time-dependent response and steady-state pixel point spread function for cylindrical diodes, and predicts bandwidths near 1 GHz for small geometries. A 2 μm diameter spot scan system was developed for point spread function and crosstalk measurements at 80 K. An electron diffusion length of 13.4 μm was extracted from spot scan data. Bandwidth data are shown that indicate bandwidths in excess of 300 MHz for small unit cells geometries. Dark current data, at high gain levels, indicate an effective gain normalized dark density count as low as 1000 counts/μs/cm² at an APD gain of 444. A junction doping profile was determined from capacitance–voltage data. Spectral response data shows a gain-independent characteristic.     

Improved arsenic doping in metalorganic chemical vapor deposition of HgCdTe andin situ growth of high performance long wavelength infrared photodiodes

Controlled and effective p-type doping is a key ingredient forin situ growth of high performance HgCdTe photodiode detectors. In this paper, we present a detailed study of p-type doping with two arsenic precursors in metalorganic chemical vapor deposition (MOCVD) of HgCdTe. Doping results from a new precursortris-dimethylaminoarsenic (DMAAs), are reported and compared to those obtained from tertiarybutylarsine (TBAs). Excellent doping control has been achieved using both precursors in the concentration range of 3 × 1015-5 × 10¹⁷ cm⁻³ which is sufficient for a wide variety of devices. Arsenic incorporation efficiency for the same growth temperature and partial pressure is found to be higher with DMAAs than with TBAs. For doping levels up to 1 × 10₁₇ cm⁻³, the alloy composition is not significantly affected by DMAAs. However, at higher doping levels, an increase in the x-value is observed, possibly as a result of surface adduct formation of DMAAs dissociative products with dimethylcadmium. The activation of the arsenic as acceptors is found to be in the 152–50% range for films grown with DMAAs following a stoichiometric anneal. However, a site transfer anneal increases the acceptor activation to near 100%. Detailed temperature dependent Hall measurements and modeling calculations show that two shallow acceptor levels are involved with ionization energies of 11.9 and 3.2 meV. Overall, the data indicate that DMAAs results in more classically behaved acceptor doping. This is most likely because DMAAs has a more favorable surface dissociation chemistry than TBAs. Long wavelength infrared photodiode arrays were fabricated on P-on-n heterojunctions, grownin situ with iodine doping from ethyl iodide and arsenic from DMAAs on near lattice matched CdZnTe (100) substrates. At 77K, for photodiodes with 10.1 and 11.1 (im cutoff wavelengths, the average (for 100 elements 60 × 60 μm² in size) zero-bias resistance-area product, R₀A are 434 and 130 ohm-cm², respectively. Quantum efficiencies are ≥50% at 77K. These are the highest R₀A data reported for MOCVDin situ grown photodiodes and are comparable to state-of-the-art LPE grown photodiodes processed and tested under identical conditions.     

Microstructural evolution and hardness of in situ Al-4.5Cu-5TiB2 composite processed by multiple roll passes in mushy state

In situ Al-4.5Cu-5TiB₂ composite has been processed through stir casting method, in which, the TiB₂ particles have been precipitated in situ by mixed salt route involving reactions between K₂TiF₆ and KBF₄.The as-cast specimens containing 20 volume percent liquid content have been subjected to three mushy state roll passes, each leading to 5 percent reduction in thickness. The grain structure has been found to be globular in the mushy state rolled composites. Measurements along the cross-section have shown decrease in average grain size and increase in hardness, as one proceeds along the direction of rolling. On the other hand, grain size and hardness have been found to be more or less similar, when compared for sections perpendicular to the rolling direction.     

Logistics cost analysis of rice straw for biomass power generation in Thailand

The logistics of the fuel supply have a large impact on the economy of a biomass power generation facility, especially for low density biomass fuels like straw. A detailed cost analysis of a typical rice straw logistics process for two baling options in three regions of Thailand shows that the costs for all logistics operations vary from a minimum of 18.75 USD/t for small rectangular bales in the Northern region of Thailand to maximum 19.89 USD/t for large rectangular bales in the North-eastern region. The difference in costs is not very significant due to the higher ownership and operating costs of the equipment for using large rectangular bales; however, the specific fuel consumption cost is substantially lower by around 17.5% and a total transport cost reduction is about 31.5%. Analysis of the logistics economies of scale for projected power plant capacities of 2-35 MW_e showed that each doubling the capacity of the energy facility increases the specific costs of the logistics operations only by around 4% in all regions.     

Generalized linear mixed model for monitoring autocorrelated logistic regression profiles

Profile monitoring is used to monitor the regression relationship between a response variable and one or more explanatory variables over time. Many researches have been done in this area, but in most of them, the distribution of the response variable is assumed to be normal. However, this assumption is violated in many real case problems. In these instances, classic methods cannot be used for monitoring the profiles. For example, when the response variable is binary, logistic regression methods should be used rather than ordinary least square or other classic regression methods. There are some methods for monitoring logistic profiles in the literature, but the basic assumption of these methods is the independency of the consecutive observations, while this assumption is violated in some instances for example when the successive samples are taken in short intervals. This paper considers the effect of autocorrelation presence between the observations in different levels of the independent variable in a logistic regression profile on the monitoring procedure (T ² control chart) and proposes two remedies to account for the autocorrelation within logistic profiles. In one of the remedies, upper control limit of the traditional T ² control chart is modified. In the second one, we use a generalized linear mixed model (GLMM) to estimate the regression parameters and then use the T ² control chart for monitoring autocorrelated logistic regression profiles. Simulation studies show the better performance of T ² control chart when the regression parameters are estimated by the GLMM method under both step shifts and drifts.     

Growth kinetics and lipid production using Chlorella vulgaris in a circulating loop photobioreactor

BACKGROUND: Compared with agriculture, microalgae culture promises to be a novel way of producing lipids for both food consumption and transportation fuel (biodiesel) purposes while using a minimal amount of land area. A circulating loop photobioreactor has been used to study the growth kinetics and lipid yield of Chlorella vulgaris growing on carbon dioxide as the sole source of carbon. RESULTS: Because of high photosynthetic active radiation (PAR) fluxes, C. vulgaris was observed to grow in exponential mode. The highest growth rate achieved was 0.049 h^?1 at the optimum growth conditions of 71.8 mW L^?1 PAR density, 10% CO₂ (v/v) in air and with an applied 8 h dark phase. The microalgae was observed to grow in a Monod fashion with a PAR density saturation coefficient of 2.8 mW L^?1. Light intensity showed the potential to significantly increase lipid yield, which reached a maximum of 30% (by mass) of cell dry weight. CONCLUSION: The circulating loop photobioreactor is a low‐cost bioreactor technology capable of culturing photosynthetic microalgae at high PAR densities and with uniform mixing and lighting. C. vulgaris is able to grow exponentially in this bioreactor and produce lipids at concentrations up to 30% by cell dry weight. Copyright © 2011 Society of Chemical Industry