Dynamic mechanical analysis of FRP composites based on different fiber reinforcements and epoxy resin as the matrix material

Three-ply composite laminates prepared from E-glass or N-glass chopped strand mats (CSMs) and jute (J) fabrics as reinforcing agents and amine-cured epoxy resin as the matrix material were subjected to dynamic mechanical thermal analysis at a fixed frequency of 1 Hz over a temperature range of 30–180°C. The volume fraction of fibers ranged between 0.21 and 0.25. The reinforcing effect for the three fibers is in the order E-glass > N-glass ≫ jute. Glass-reinforced composites show a higher storage modulus (E′) than that of jute-reinforced composites. The E′ values of glass-jute hybrid composites lie between those of glass-reinforced and jute-reinforced composites. Odd trends in temperature variability of the loss modulus (E′) and the damping parameter, tan δ, and in the glass transition temperature (T_g) for the three different unitary and four different hybrid composites are interpreted and understood on the basis of odd differences in (1) the chemical nature and physical properties of the three different fibers (E-glass, N-glass, and jute), (2) the void content and distribution, (3) the thermal expansion coefficients of the main phases in the composites, (4) the degree of matrix stiffening at or near the fiber-matrix interface, and (5) the extents of matrix softening in the zone next to the interface. © 1997 John Wiley & Sons, Inc. J Appl Polym Sci 64: 2467–2472, 1997     

Polyhalide Derivatives of Polystyrene-based Benzyltriethylammonium Resins as Oxidizing Reagents: Synthetic and Reactivity Correlations

The oxidation of alcohols using polystyrene-based benzyltriethylammonium dichloroiodate, tetrachloroiodate and dichlorobromate reagents is described. On reaction with different alcohols, the polymeric polyhalide reagents afforded the respective carbonyl compounds in high yields. The insoluble spent reagents could be regenerated and reused without significant loss in reactivity. The reactivities of the polymeric polyhalides were investigated as a function of the nature of solvents, effective molar concentration of the reagent, temperature and by varying the polarity of the macromolecular support, and the results are discussed. © of SCI.     

Multiobjective dynamic optimization of an industrial nylon 6 semibatch reactor using genetic algorithm

The nondominated sorting genetic algorithm (NSGA) is adapted and used to obtain multiobjective Pareto optimal solutions for three grades of nylon 6 being produced in an industrial semibatch reactor. The total reaction time and the concentration of an undesirable cyclic dimer in the product are taken as two individual objectives for minimization, while simultaneously requiring the attainment of design values of the final monomer conversion and for the number-average chain length. Substantial improvements in the operation of the nylon 6 reactor are indicated by this study. The technique used is very general in nature and can be used for multiobjective optimization of other reactors. Good mathematical models accounting for all the physicochemical aspects operative in a reactor (and which have been preferably tested on industrial data) are a prerequisite for such optimization studies. © 1998 John Wiley & Sons, Inc. J Appl Polym Sci 69: 69–87, 1998     

L-menthol-based initiators for atom transfer radical polymerization of styrene

Two new atom transfer radical polymerization (ATRP) initiators, 2-isopropyl-5-methylcyclohexyl 2-bromopropanoate ( 1 ) and 2-Isopropyl-5-methylcyclohexyl 2-bromo-2-methylpropanoate ( 2 ), have been synthesized by the reaction of 2-bromopropanoyl bromide and 2-bromo-2-methylpropanoyl bromide, respectively, with L-menthol and characterized by ¹H and ¹³C NMR and FTIR spectroscopic studies. ATRP of styrene has successfully been carried out in a control manner using these initiators along with catalyst/ligand system consisting of Cu(I)Br/N,N,N ^/,N ^/,N ^//-pentamethyldiethylenetriamine. Polymerizations have yielded polystyrenes (PSts) of controlled molecular weight with low polydispersity index having a menthyl end group, as confirmed by ¹H NMR and gel permeation chromatography [GPC]. The controlled nature of the polymerization has also been confirmed by kinetic study of the polymerization process monitored via ¹H NMR and GPC. Initiator 2 has evolved as most efficient among the two. The obtained end-functional PSt has also been used as a macroinitiator for homochain extension with styrene and heterochain extension with methyl methacrylate to produce PSt-b-PMMA, showing the living nature of the polymerization process. In comparison with the PSt sample prepared using widely used initiator ethyl-2-bromo-isobutyrate with almost the same molecular weight and polydispersity, initiator 2 -made L-menthyl-capped PSt has shown higher light transmission properties of its dichloromethane solution at ~259 nm, higher thermal stability, lower glass transition temperature, a broad melting temperature, and higher surface roughness over its film. © 2019 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2019 , 136, 47964.     

Quality attributes and rheological properties of novel high milk protein-based extrudates made by supercritical fluid extrusion

Supercritical fluid extrusion (SCFX) process has opened up a new way of extruding heat-sensitive materials such as milk protein concentrate (MPC) into novel nutritional porous extrudates. Three formulations (30%:66.5%, 60%:36.5% and 90%:6.5% of MPC: rice flour, w/w) with 1% Dimodan, 1% lecithin and 1.5% salt were extruded by using SCFX. The physical, rheological and thermal properties of the extrudates were evaluated. The results showed that the increased MPC contents decreased gelatinisation enthalpy and increased the viscosity of the extrudates, which contributed to develop stable porous extrudates; and the increased MPC contents also helped to form a stronger gel network existed in dispersion of the extrudate samples, which resulted in a higher stress to break the gel and flow. The radial and overall expansions, crispness, porosity, rehydration ratio, moisture content and water activity increased while the axial expansion, hardness, piece density, apparent density, bulk density, decreased with higher amounts of MPC contents in extrudates. The overall results indicated that 90% MPC-containing extrudate was very suitable for developing highly nutritional and healthy cereals/snacks.     

Small-Molecule Inhibitors of Shp2 Phosphatase as Potential Chemotherapeutic Agents for Glioblastoma: A Minireview

Glioblastoma multiforme (GBM) is a dreadful cancer characterised by poor prognosis, low survival rate and difficult clinical correlations. Several signalling pathways and molecular mediators are known to precipitate GBM, and small-molecular targets of these mediators have become a favoured thrust area for researchers to develop potent anti-GBM drugs. Shp2, an important phosphatase of the nonreceptor type protein tyrosine phosphatase (PTPN) subfamily is responsible for master regulation of several such signalling pathways in normal and glioma cells. Thus, inhibition of Shp2 is a logical strategy for the design and development of anti-neoplastic drugs against GBM. Though tapping the full potential of Shp2 binding sites has been challenging, nevertheless, many synthetic and natural scaffolds have been documented as possessing potent and selective anti-Shp2 activities in biochemical and cellular assays, through either active-site or allosteric binding. Most of these scaffolds share a few common pharmacophoric features, a thorough study of which is useful in paving the way for the design and development of improved Shp2 inhibitors. This minireview summarizes the current scenario of potent small-molecule Shp2 inhibitors and emphasizes the anti-GBM potential of some important scaffolds that have shown promising GBM-specific activity in in vitro and in vivo models, thus proving their efficacy in GBM therapy. This review could guide researchers to design new and improved anti-Shp2 pharmacophores and develop them as anti-GBM agents by employing GBM-centric drug-discovery protocols.     

Effect of Welding Speed on Texture in Laser-Welded Dual-Phase Steel

Metallurgical and Materials Transactions A - The present study makes an attempt to understand the influence of welding speed on the formability of a welded microalloyed steel. An optimum heat input...     

Development of nickel-based cable batteries with carbon nanotube and polytetrafluoroethylene enhanced flexible electrodes

The fabrication of flexible nickel-based cable batteries is presented. Different fabrication methods, as well as formulations, were studied. It was found that iron anodes were more suitable than zinc electrodes for the helix design used in the cable/rope-shaped cells, possibly due to their higher stability in the alkaline environment. Furthermore, the addition of a thin polytetrafluoroethylene (PTFE) layer to the electrodes enhanced their mechanical stability, making them more durable and stable when twisted into helixes during cell assembly and packaging. A single-step precipitation reaction was used to load iron oxides directly onto carbon nanotubes, which promoted contact between iron/iron oxide particles and conductive additives and thus improved the discharge capacity of the batteries. After optimizations, the typical iron anode showed initial specific capacity higher than 90 mAh g⁻¹, though it decreased to around 60 mAh g⁻¹ and remained more stable as cycles continued. The cable cells also remained functional and showed consistent performance under bent conditions.