Reliable indirect competitive ELISA used for a survey of ochratoxin A in green coffee from the North of Paraná State, Brazil.

The performance of an indirect competitive enzyme-linked immunosorbent assay (ic-ELISA) based on a monoclonal antibody (mAb) for ochratoxin A (OTA) detection was evaluated in a comparative study with high-performance liquid chromatography (HPLC) analysis using 68 freshly harvested coffee samples from the North of Paraná State, Brazil. The anti-OTA mAb showed high specificity and low cross-reactivity with OTA analogues (OTB and OTalpha), but cross-reacted with OTC. This ic-ELISA showed a detection limit of 3.75 ngg-1 sample, when compared to 0.80 ngg-1 by HPLC, with an ic-ELISA/HPLC correlation coefficient of 0.90. As regards OTA analysis of these coffee samples, natural contamination was detected in 10 samples (14.7%) by both methods, where the ic-ELISA values (range 3.9-7.3 ngg-1) were 1.1 to 1.6-fold higher than HPLC data (2.7-4.7 ngg-1). Five samples (7.4%) were OTA positive (range 0.84-1.30 ngg-1) only by HPLC assay, probably due to the higher detection limit reached by ic-ELISA. OTA was undetectable in 53 samples (77.9%) by both methods, while all positive samples (range 0.84-7.30 ngg-1) showed OTA levels lower than 8 ngg-1 (maximum limit recommended by the European Union). The matrix interference of green coffee was minimized by dilution of sample extracts before carrying out the ELISA assay. This mAb-based ic-ELISA can be effectively applied for OTA screening in coffee, because it is simple, sensitive and sample preparation is easy.     

DC conduction associated with electric field-induced motion in mineral oils

The contributions of the electrohydrodynamic (EHD) motion to the dc electric conduction in insulating oils are presented. The effects of solid/liquid interfaces on the EHD motion have been studied with a mineral oil-polypropylene mixed dielectric and a mineral oil single dielectric. The time dependence of current, schlieren images of EHD motion induced in the oil layer and response signals of density change in the vicinity of the electrode/oil interfaces after application of step voltage are observed. The results are as follows: (1) the EHD motion occurs at the positive electrode/oil interfaces when a voltage above critical voltage is applied; (2) a time delay exists between the application of step voltage and the onset of EHD motion. The time is inversely proportional to the applied voltage; (3) the EHD motion increases current and produces a peak phenomena in the current waveform; and (4) the time difference between peak current time and the delay time is inversely proportional to applied voltage.     

Hearing recovery in sudden deafness with profound hearing loss

To more completely describe acromion morphology and its relationship to impingement syndrome, we performed three-dimensional magnetic resonance imaging (N = 111) or computed tomography (N = 27) on 132 symptomatic shoulders. The mean patient age was 46.2 years (range, 14 to 86). Four parameters were evaluated: the angle of anterior slope of the acromion in the midsagittal and lateral-sagittal planes, lateral acromial angulation in the coronal plane, and the presence or absence of medial encroachment in the acromioclavicular joint. Twenty-five asymptomatic age-matched shoulders were used as controls. All imaging data were combined because no significant differences existed between the two imaging techniques. The mean acromion angle was 19.4 degrees in the midsagittal plane and 20 degrees in the lateral-sagittal plane. In the coronal plane, 97 (73%) acromions were neutral and 35 (27%) were downward sloping. Medial encroachment was present in 31 (24%) shoulders. Age distribution from the 2nd to 8th decade demonstrated a consistent and gradual transition from a flat acromion in the younger decades to a more hooked acromion in the older decades that was significant in both the midsagittal and lateral-sagittal planes. Furthermore, a greater percentage of patients were found to have downward angulating acromions with increasing age. Ninety-eight patients (74%) had stage II or III impingement. Of these shoulders, 39 (40%) had type I acromions, 51 (52%) type II, and 8 (8%) type III. Twenty-eight of 33 acromions with coronal lateral downward sloping had impingement, and all 31 shoulders with medial encroachment had impingement.     

Nucleotide sequencing analysis of the 146-kilobase segment around the IkBL and MICA genes at the centromeric end of the HLA class I region

The biomechanics of medialization laryngoplasty are not well understood. An excised canine larynx model was used to test the effects of various sized silicon implants. The vocal fold length, position, and tension were measured. Medialization laryngoplasty did not affect vocal fold length. At the mid-membranous vocal fold, larger shims resulted in greater medialization and tension. Medialization laryngoplasty neither medialized nor stiffened the vocal process to resist lateralizing forces. We conclude that medialization laryngoplasty provides bulk and support for defects of the membranous region of the vocal fold, but does not appear to close a posterior glottal gap. The selection of a surgical procedure to treat glottal incompetence should take into account the unique biomechanical properties of the anterior (membranous vocal folds) and posterior (cartilaginous portion) glottis.     

Clinical significance of natural killing activity in patients with advanced lymphoma

OBJECTIVE: (1) To determine which facial landmarks show the greatest movement during specific facial animations and (2) to determine the sensitivity of our instrument in using these landmarks to detect putatively abnormal facial movements. DESIGN: Movements of an array of skin-based landmarks on five healthy human subjects (2 men and 3 women; mean age, 27.6 years; range, 26 to 29 years) were observed during the execution of specific facial animations. To investigate the instrument sensitivity, we analyzed facial movements during maximal smile animations in six patients with different types of functional problems. In parallel, a panel was asked to view video recordings of the patients and to rate the degree of motor impairment. Comparisons were made between the panel scores and those of the measurement instrument. RESULTS: Specific regions of the face display movement that is representative of specific animations. During the smile animation, landmarks on the mid- and lower facial regions demonstrated the greatest movement. A similar pattern of movement was seen during the cheek puff animation, except that the infraorbital and chin regions demonstrated minimal movement. For the grimace and eye closure animations, the upper, mid-facial, and upper-lip regions exhibited the greatest movement. During eye opening, the upper and mid-facial regions, excluding the upper lip and cheek, moved the most, and during lip purse, markers on the mid- and lower face demonstrated the most movement. We used the smile-sensitive landmarks to evaluate individuals with functional impairment and found good agreement between instrument rankings based on the data from these landmarks and the panel rankings. CONCLUSION: The present method of three-dimensional tracking has the potential to detect and characterize a range of clinically significant functional deficits.     

Osteoclastogenesis inhibitory factor exhibits hypocalcemic effects in normal mice and in hypercalcemic nude mice carrying tumors associated with humoral hypercalcemia of malignancy

In the present study, we attempted to determine the extent to which an anterior capsulorrhexis carried out during cataract surgery contracts postoperatively. The size of the continuous curvilinear capsulorrhexis (CCC) was measured at the end of surgery and at the final follow-up examination in 52 eyes of 40 patients who underwent phacoemulsification/aspiration and implantation of an intraocular lens (IOL) with 6-mm optics. Images obtained by video during surgery and by slit-lamp microscopy were used to determine the CCC size with reference to the optics of the IOL. The average CCC size was 5.0 mm at the end of surgery; it contracted to 4.4 mm by the final postoperative examination. The contraction of the anterior capsule progressed rapidly in the first 50 days following surgery and then gradually thereafter. The extent of contraction was greater in older patients. The smaller the CCC size immediately after surgery, the more rapidly it contracted. The size of the capsulorrhexis contracted an average of 22% following cataract surgery. The contraction rate tended to be higher in older patients. The results suggest that the capsulorrhexis carried out in cataract surgery for elderly patients should be sufficiently large, but not larger than the optics size of the IOL.     

Velocity, electromechanical coupling factor and acoustic loss of surface shear waves propagating along x-axis on rotated Y-cut plates of LiNbO3

Velocity and propagation loss of surface shear waves are measured on free-space and metallised surfaces of LiNbO3 crystals along the x-axis of rotated Y-cut plates as a function of rotation about the x-axis between 35° and 70°. The coupling factor obtained from the velocities is 0.20 for a 35° rotated Y-cut plate and 0.09 for a 70° plate. The coupling factor changes linearly with the rotation angle. The propagation losses over the whole range measured here are less than 5 dB/cm on both free-space and on metallised surfaces. These losses are fairly low and very favourable for fabricating s.a.w. filters.     

Experimental Facsimile Communication System on Packet Switched Data Network

The use of the public data network for facsimile communication has remarkable advantages with regard to high speed and reliable transmission and, in addition, it is well applicable to provide value added facilities for future service extension. The Research and Development Laboratories of Kokusai Denshin Denwa (KDD) Company, Ltd. have developed an experimental facsimile communication system on the packet switched data network (PSDN). The system is composed of packet switching exchanges (PSE), high speed digital facsimile terminal equipment, a facsimile communication processor (FCP), and facsimile packet assembly/ disassembly equipment (FAX-PAD). The facsimile equipment in the system adopts a two-dimensional modified READ code and has the interface protocol to the PSDN. The FCP provides the store-and-forward facilities to provide such services as delayed delivery, multiaddress delivery, and mailbox service. The FAX-PAD realizes the interworking between facsimile equipments on the public switched telephone network (PSTN) and those on PSDN. After various experiments including international field tests, it was confirmed that the system is useful for future advanced facsimile service.     

Mating-induced mating-type cassette conversion in Saccharomyces cerevisiae

We have previously reported that the HMRa-bearing restriction fragment of a rho degrees sir4-11 strain (HMLalpha-MATalpha-HMRa), which acts as an alpha-mater because of being rho degrees , changes its electrophoretic mobility when the strain mates with a certain group of a-mating strains (HMLalpha-MATa-HMRa). In this study, we found that the sir4-11 strain being rho degrees was not essential for this phenomenon and also that the altered form of the fragment contained HMRalpha in place of HMRa. Furthermore, we observed conversion of HMLa to HMLalpha in the cross in which a sir4-11 HMLa-MATalpha-HMRalpha strain was mated with a representative of the above-mentioned a-mating strain. In addition, when this a-mating strain was mated with a SIR(+) HMLalpha-MATa-HMRalpha strain, the resultant diploid was found to be HMLalpha/HMLalpha MATa/MATalphaHMRa/HMRalpha, indicating that conversion of MATa to MATalpha had taken place in the course of mating. From all these observations, we conclude that there is a group of S. cerevisiae strains that carries factor(s) that induces conversion of a mating-type cassette of the mating partner to alpha mating-type cassette and that this mating type cassette conversion takes place in all three mating type loci, HML, MAT and HMR, if the loci are in the non-silenced condition.     

Production of vitamin B12 in genetically engineered Propionibacterium freudenreichii

Since the chemical synthesis of vitamin B12 requires more than 70 steps, the production of vitamin B12 has been achieved by microorganism fermentation with additional brief chemical modifications. In an effort to increase the productivity of vitamin B12, we tried to express 10 genes belonging to the hem, cob and cbi gene families involved in the synthesis of vitamin B12 in Propionibacterium freudenreichii, which is a known producer of vitamin B12. In a recombinant P. freudenreichii clone that harbored the expression vector containing a cobA, cbiLF, or cbiEGH, we obtained an increase in vitamin B12 production of 1.7-, 1.9-, and 1.5-fold higher, respectively, than that in the microorganism without any cloned genes in the expression vector pPK705. The cobU and cobS genes caused a slight increase in the production of vitamin B12. Furthermore, we achieved multigene expression in P. freudenreichii. In a recombinant P. freudenreichii clone that harbored an exogenous gene, hemA, from Rhodobacter sphaeroides and endogenous hemB and cobA genes, we successfully achieved the production of about 1.7 mg/l vitamin B12, 2.2-fold higher than that produced by P. freudenreichii harboring pPK705.