Frequency and Size Dependences of Superfluidity in?Low-Dimensional 4He Fluids

We have studied superfluidity of ⁴He fluids in two- and one-dimensional states. In the 2D state of the ⁴He films on flat substrate, superfluidity was observed in the normal fluid state above the 2D Kosterlitz-Thouless temperature at high measurement frequencies. The superfluidity in 2D also depends on the system size, e.g. pore diameter of porous glasses and grain size of powder. The 1D state was realized for ⁴He fluid nanotubes formed in 1D nanopores 1.8?C4.7 nm in diameter and about 300 nm in length. Superfluidity in the 1D state was observed by the torsional oscillator experiment. The results are qualitatively well reproduced by the Monte Carlo calculation for a classical XY spin system modeled on the present ⁴He nanotubes. Although the 1D state is in the normal fluid state at any finite low temperatures due to the 1D phonon fluctuation, the superfluid frequency shift ??f of the oscillator can be observed. Above a temperature, ??f decreases due to another kind of 1D thermal fluctuation of which excitations destroy the phase coherence in the nanotubes. The excitations depend on the tube length as well as the tube diameter.     

Control of wetting on Ti-based bulk metallic glass surfaces by a hydrothermal method

The surfaces of the Ti-based bulk metallic glasses (Ti₅₀Ni₂₀Cu₂₅Sn₅) were modified by a hydrothermal method using sodium hydroxide (NaOH) solution, and the surface wettability was investigated. No reflections were observed in the XRD patterns of the NaOH-treated samples even though there was a clear change of the color, indicating formation of amorphous oxide phases. The Raman spectra showed peaks attributed to sodium titanate compounds (Na–O–Ti) and titanium oxide. Some of the samples were observed to have a very rough surface microstructure such as a “house-of-cards” or leaf-like structure. The water contact angle of the treated samples decreased with increasing treatment temperature and time. These results indicate that the wettability of the sample surface was able to be controlled from hydrophobic to hydrophilic by changing the conditions of the hydrothermal treatment.     

Current control of a PWM power amplifier by an approximate 2-degree-of-freedom digital controller

There is a need for robust current control of a pulse width modulation (PWM) power amplifier whose transient response characteristics do not deteriorate with extensive load changes and/or direct-current power supply voltage changes. In this article, we propose a digital robust controller with bumpless mode switching to control the current of a PWM power amplifier to satisfy the demands and extend the range of an inductive load width. It is necessary to measure the value of the load in order to implement this bumpless mode switching automatically depending on the load range. Therefore, a method of estimating the inductive load is shown. The bumpless mode switching is automatically performed by estimating an inductive value without specifying the value of the inductive load beforehand. That is, the value of the inductive load is estimated during the DDC execution, and the control mode is automatically switched bumplessly according to this estimated value. A digital controller equipped with inductance estimation and bumpless mode switching is realized by a DSP. Some experiments show that the digital controller with the proposed bumpless mode switching can satisfy larger specifications.     

Localization and regulation of renal Na+/myo-inositol cotransporter in diabetic rats

We have examined the effect of diabetes on sodium/myo-inositol cotransporter (SMIT) mRNA levels and myo-inositol content in the kidney to test the hypothesis that diabetes-induced changes in renal myo-inositol levels are due to the regulation of SMIT mRNA levels. In streptozotocin-induced diabetic rats, after 3, 7 and 28 days of diabetes, SMIT mRNA levels in the whole kidney were increased three to fivefold, and remained increased by about twofold after six months of diabetes. Insulin treatment of diabetic rats normalized blood glucose levels and prevented the increase in SMIT mRNA levels. Treating diabetic rats with sorbinil, an aldose reductase inhibitor, corrected the abnormal accumulation of sorbitol but had no effect on the diabetes-induced increase in renal SMIT mRNA levels. The regional distribution of SMIT mRNA from normal rats showed a relative abundance in cortex, outer medulla, and inner medulla of 1.0:3.4:7.0. After seven days of diabetes, the levels of SMIT mRNA and myo-inositol content were significantly increased only in the outer medulla. In situ hybridization studies revealed that SMIT mRNA in the outer medulla was predominately localized to the medullary thick ascending limbs of Henle's loop and was not localized to any specific cell in the inner medulla. This distribution pattern was unchanged in diabetic rats. These studies show that diabetes causes an increase in renal SMIT mRNA, which is primarily localized to the outer medulla. Accumulation of myo-inositol by the thick ascending limb of Henle's loop may account for most of the increase caused by diabetes.     

Specific Heat Anomaly in bcc Solid 3He

We have studied the origin of the excess specific heat (anomaly) above 10 mK in bcc solid ³ He near melting pressure. We applied strong magnetic fields to the sample to see whether the anomaly arises from spin polarons due to vacancies. The specific heat is the same before and after applying magnetic fields of 10-12 T. This result possibly indicates that the anomaly arises from the origin different from vacancies. Next, in order to check whether the anomaly comes from the surface magnetism, we measured the specific heat by coating the surface of sintered silver with three layers and two layers of ⁴ He. The results showed that unexpected large heat capacity due to phase separation of solid ³ He-⁴ He surpassed and smeared the original specific heat anomaly. We are investigating the origin of the anomaly further.     

Butyrylcholinesterase K variant and cerebral amyloid angiopathy

BACKGROUND and PURPOSE: Cholinesterases are found histochemically in the vessels affected with cerebral amyloid angiopathy (CAA). A gene for the K variant of butyrylcholinesterase (BCHE-K) may be associated with late-onset Alzheimer's disease (AD). In search of genetic risk factors for CAA, we investigated the association of BCHE-K with CAA. METHODS: The association between the severity of CAA and BCHE-K was investigated in 155 autopsy cases of the elderly, including 48 patients with AD. RESULTS: There was no significant association of BCHE-K with the severity of CAA in the total, AD, or non-AD cases. Status of the epsilon4 allele of apolipoprotein E gene did not influence the results. CONCLUSIONS: Our results may suggest that BCHE-K is not a definitive risk factor for CAA in the elderly, although further study with larger samples is necessary to confirm this.     

Modular manufacturing

This paper discusses requirements to be satisfied by future manufacturing systems and proposes a new concept of modular manufacturing to integrate intelligent and complex machines. In large-scale systems such as manufacturing systems, modularization is indispensable for clarifying logical structure and assuring a high degree of ease of construction. The parts, products and manufacturing equipments as well as the design and operating activities themselves are all described in units called modules. A manufacturing system is constructed and operated by combining these in building-block style. The creation of this manufacturing system relies on construction and operating systems that enable design and simulation in the virtual world, and production and control in the real world, in a unified approach. Hardware modules and software modules are compiled flexibly and hierarchically to fulfil specified tasks. A system in which modular manufacturing as a concept of system integration is applied to manufacturing robots is called a modular robot system. The robots are embedded in manufacturing systems as the highest application of model-based robotics.     

Lumisight Table: an interactive view-dependent tabletop display

A novel tabletop display provides different images to different users surrounding the system. It can also capture users' gestures and physical objects on the tabletop. The Lumisight Table approach is based on the optical design of a special screen system composed of a building material called Lumisty and a Fresnel lens. The system combines these films and a lens with four projectors to display four different images, one for each user's view. In addition, we need appropriate input methods for this display media. In the current state of the project, we can control computers by placing physical objects on the display or placing our hands over the display. This screen system also makes it possible to use a camera to capture the appearance of the tabletop from inside of the system. Our other main idea is to develop attractive and specialized applications on the Lumisight Table, including games and applications for computer-supported cooperative-work (CSCW) environments. The projected images can be completely different from each other, or partially identical and partially different. Users can share the identical parts as public information, because all users can see it. This article is available with a short video documentary on CD-ROM.     

Callus formation in the humerus compared with the femur and tibia during limb lengthening

We investigated whether the callus formation in the humerus during the distraction period of limb lengthening proceeds at a higher rate than that in the femur and tibia. Ten achondroplastic patients underwent 3 bilateral humerus, 3 bilateral femur and 4 bilateral tibia lengthenings. To reduce the confounding effect of bone size, we used bone mineral apparent density (BMAD) to compare the three groups; this is a volumetric bone mineral density measurement. BMAD in the distracted callus space was evaluated at 8 weeks after the start of distraction using dual-energy X-ray absorptiometry (mean +/- SD; g/cm3): in the humerus (0.24 +/- 0.08) it was significantly higher than in the tibia (0.10 +/- 0.02), while there was no difference between the humerus and femur (0.35 +/- 0.11). We conclude that the callus formation in the humerus during the distraction period of limb lengthening proceeded at a significantly faster rate than in the tibia, but there was no significant difference between the humerus and femur.     

Development of InxGa1−xAs-based ohmic contacts for p-type GaAs by radio-frequency sputtering

In_xGa_1−xAs-based ohmic contacts which showed excellent contact properties for n-GaAs were demonstrated to be applicable to p-GaAs ohmic contacts. These contacts, prepared by radio-frequency sputtering, provided low contact resistance (0.2 Ω-mm), excellent thermal stability, smooth surface, and good reproducibility. The contact resistances had a weak dependence on the annealing temperatures, which was desirable in a manufacturing view point. This weak temperature dependence was explained to be due to a unique Schottky barrier height at the metal/p-In_xGa_1−xAs interface which does not depend on the In concentration in the In_xGa_1−xAs layer. The present experiment showed the possibility of simultaneous preparation of ohmic contacts for both n and p-GaAs using the same contact materials.