Selective High‐Frequency Mechanical Actuation Driven by the VO2 Electronic Instability

Relaxation oscillators consist of periodic variations of a physical quantity triggered by a static excitation. They are a typical consequence of nonlinear dynamics and can be observed in a variety of systems. VO₂ is a correlated oxide with a solid‐state phase transition above room temperature, where both electrical resistance and lattice parameters undergo a drastic change in a narrow temperature range. This strong nonlinear response allows to realize spontaneous electrical oscillations in the megahertz range under a DC voltage bias. These electrical oscillations are employed to set into mechanical resonance a microstructure without the need of any active electronics, with small power consumption and with the possibility to selectively excite specific flexural modes by tuning the value of the DC electrical bias in a range of few hundreds of millivolts. This actuation method is robust and flexible and can be implemented in a variety of autonomous DC‐powered devices.     

Transmission Characteristics of Hybrid Modes in Corrugated Waveguides Above the Bragg Frequency

We studied the transmission characteristics of hybrid modes in a corrugated circular waveguide above the Bragg frequency to develop a broad-band transmission line for millimeter waves. Millimeter waves at 294 GHz were transmitted into a straight waveguide. From observed power profiles in waveguide cross-sections, a high attenuation rate of 0.13 dB/m was obtained. To match a theoretical attenuation constant with the experimental one, we introduced an ad hoc coefficient of conventional surface reactance in the waveguide wall. This was necessary because the wall began to look like the surface with a decreasing anisotropic reactance owing to the frequency above the Bragg frequency. Using nonlinear optimization for mode content analysis, the observed power profiles in the waveguide cross-section were matched with theoretical profiles. There was good agreement between the calculated and observed centers of power profiles and attenuation rate along the waveguide. The theoretical analysis showed that the magnetic field at the waveguide wall increases and the substantial attenuation takes place. Above the Bragg frequency coupling to backwards propagating modes is a point of consideration. A combination of the backwards propagating EH_1,26 and the forward propagating HE₁₁ modes satisfied the Bragg condition at 294.7 GHz which was the nearest frequency of operating frequency. A strong attenuation of the incoming HE₁₁ mode by Bragg resonance was not expected due to large difference of 0.7 GHz. It becomes clear that the observed high transmission loss outside of the Bragg resonance can be explained by a decrease in anisotropic surface reactance at the wall.     

Covered conduction of individual C(60) nanowhiskers

We investigate the electronic properties of individual C(60) nanowhiskers by exploiting conductive atomic force microscopy at room temperature in ambient atmosphere. The pristine individual C(60) nanowhiskers exhibit conducting behavior. The outer C(60) oxide covering, confirmed by Auger electron spectroscopy, shelters the conductive properties of the C(60) nanowhiskers. It is proposed that the insulating outer C(60) oxide covering might be used as the dielectric layer in potential single C(60) nanowhisker-based field-effect transistors for nanoelectronics.     

Radiophotoluminescence dosimetry using a small spherical glass: a preliminary phantom study

A radiophotoluminescence dosimetry has been proposed using a spherical silver-activated phosphate glass with a diameter of 1.5 mm. A 6 MV photon dose of 2 Sv (2 Gy) was delivered to 14 spherical glass samples placed between two solid water phantoms at a depth of 10 cm. The samples were positioned within a 20 x 20 mm(2) centred at beam axis to ensure uniform dose absorption. A normalised output from a read-out system was obtained by simultaneously measuring luminescence from a non-irradiated reference and that from an irradiated reference to eliminate background contamination and time-varying fluctuation of the readout system, leading to a normalised standard deviation of 1.8%. A dose up to 3.5 Sv (3.5 Gy) was delivered to three spherical glass samples positioned between two solid water phantoms at a depth of 10 cm. The normalised output increased linearly with the applied dose.     

Random exchanges of non-conserved amino acid residues among four parental termite cellulases by family shuffling improved thermostability

There have been two major problems preventing applications of termite cellulases; one was difficulty for their hetelologous overexpression, and another is their low thermostability. We previously achieved adaptation of termite cellulase genes to an overexpression system of Escherichia coli by family shuffling of four orthologous cDNAs (Biosci. Biotechnol. Biochem., 2005; 69: 1711-1720). Using the adapted mutant cDNAs as parental genes combined with native-form cDNAs, we performed further family shuffling and obtained mutant cDNAs, which gave enzymes with improved thermostability. The best-evolved clone (PA68) was improved by 10 degrees C in maximum stability (retaining 90% original activity for 30 min incubation) from the parental enzymes, and kept 54% of its original activity for 150 min at 50 degrees C, whereas the most thermostable enzyme amongst the parents (A18) retained 30% of its original activity. PA68 showed 889 (micromoles of reducing sugars/min/mg of protein) in V(max) and 560 (micromoles of reducing sugars/min/mg of protein) in the specific activity against carboxymethylcellulose, which corresponds to 9.8 and 13.1 times of those of one of the ancestral enzymes rRsEG. In summary, we improved thermostability of the termite cellulase and increased the V(max) value and specific activity by combining only cDNAs encoding enzymes adapted for normal temperatures.     

Electrical switching of the vortex core in a magnetic disk

A magnetic vortex is a curling magnetic structure realized in a ferromagnetic disk, which is a promising candidate for a memory cell for future non-volatile data-storage devices. Thus, an understanding of the stability and dynamical behaviour of the magnetic vortex is a major requirement for developing magnetic data-storage technology. Since the publication of experimental proof for the existence of a nanometre-scale core with out-of-plane magnetization in a magnetic vortex, the dynamics of vortices have been investigated intensively. However, a way to electrically control the core magnetization, which is a key for constructing a vortex-core memory, has been lacking. Here, we demonstrate the electrical switching of the core magnetization by using the current-driven resonant dynamics of the vortex; the core switching is triggered by a strong dynamic field that is produced locally by a rotational core motion at a high speed of several hundred metres per second. Efficient switching of the vortex core without magnetic-field application is achieved owing to resonance. This opens up the potentiality of a simple magnetic disk as a building block for spintronic devices such as a memory cell where the bit data is stored as the direction of the nanometre-scale core magnetization.     

Performance analysis of shaft generator systems

A shaft generator system supplies electrical power required in a ship by using a part of the power produced by the main engine. Since the speed of the main engine can vary over a wide range, an externally commutated thyristor inverter, which has high reliability, is generally used to produce ac power with constant voltage and frequency. In this paper, a set of system equations, by which the total harmonic distortion of the output voltage, for example, can be estimated, is derived first. The effects of leading angle of the inverter and the reactance of ac reactor located in the output side of the inverter on the system performances and the operation limit of the system are then clarified. Moreover, a way of taking the system losses into account is proposed to obtain precise calculation results. Finally, the apparent power for the synchronous condenser to provide reactive power in the system is discussed. © 2000 Scripta Technica, Electr Eng Jpn, 131(3): 70–79, 2000     

Evaluating the performance of forced convection heat transfer enhancement

Two methods for assessing thermal performance were evaluated for four kinds of forced convective heat transfer augmentations. On method uses the first law of thermodynamics, i.e., the heat transfer improvement at (1) constant Reynolds number, (2) constant pressure loss, and (3) constant pumping power. The other method uses the second law of thermodynamics, i.e., the entropy generation. The first method restricts the effective region and the second method supplies the condition for achieving the minimum entropy generation rate. © 1998 Scripta Technica, Heat Trans Jpn Res, 27(2): 142–154, 1998     

Cell distributions in and sound absorption characteristics of flexible polyurethane foams

In this article, the two-dimensional distributions of cells from the cross section of some flexible polyurethane foams were cleared, and the three-dimensional distributions of cells based on Saltykov's theory were estimated further. As a result, it was found that a mean of the two-dimensional distributions of cells was a good linear relation with a mean of the three-dimensional distributions of cells, and it was confirmed that cell structure of the foams which should have been analyzed in the three-dimensional distributions was evaluated by analysis of the two-dimensional distributions fully. It was also found that not only cell number but also cell distribution was necessary in the evaluation of flexible polyurethane foams, and cell diameter was closely related to the sound absorption coefficient in polyester-based flexible polyurethane foams. © 1997 John Wiley & Sons, Inc. J Appl Polym Sci 65: 1395–1402, 1997     

Identification of Tumor Antigens in Ovarian Cancers Using Local and Circulating Tumor-Specific Antibodies

Ovarian cancers include several disease subtypes and patients often present with advanced metastatic disease and a poor prognosis. New biomarkers for early diagnosis and targeted therapy are, therefore, urgently required. This study uses antibodies produced locally in tumor-draining lymph nodes (ASC probes) of individual ovarian cancer patients to screen two separate protein microarray platforms and identify cognate tumor antigens. The resulting antigen profiles were unique for each individual cancer patient and were used to generate a 50-antigen custom microarray. Serum from a separate cohort of ovarian cancer patients encompassing four disease subtypes was screened on the custom array and we identified 28.8% of all ovarian cancers, with a higher sensitivity for mucinous (50.0%) and serous (40.0%) subtypes. Combining local and circulating antibodies with high-density protein microarrays can identify novel, patient-specific tumor-associated antigens that may have diagnostic, prognostic or therapeutic uses in ovarian cancer.