Enhanced fair earliest due date first scheduling strategy for multimedia applications in LTE downlink framework

Guaranteeing a certain delay threshold for delay‐sensitive applications in long term evolution (LTE) cellular communication system is a very challenging mission. By implementing an optimal scheduling strategy, this mission will be achieved. In this article, a novel scheduler is introduced in order to meet a predefined level of service quality by guaranteeing a specific delay threshold for delay‐sensitive applications in LTE cellular systems. The proposed scheduler assigns the available resource blocks (RBs) to active user equipments (UEs) tacking into consideration several attributes. The expiration date of each packet, the channel quality, the average data rate previously achieved by each UE, and the number of dropped packets for each UE compared with the average number of packets totally dropped are all considered in the proposed scheduler working mechanism. Consequently, the proposed scheduling strategy reduces the number of packets dropped for multimedia applications, and at the same time maximizes the overall throughput of the network. Simulation results are provided to study and evaluate the performance of the proposed scheduling strategy. A comparative study is presented between the proposed strategy and the most recent scheduling techniques. The obtained results prove that the proposed scheduling strategy has considerably acceptable and appreciated results compared with the results of the state‐of‐the‐art scheduling techniques.     

Architectural Design,Improvement, and Challenges of Distributed Software-Defined Wireless Sensor Networks

Wireless Personal Communications - Software-defined networking (SDN) is widely perceived to simplify network management and monitoring. The introduction of the SDN model into wireless sensor...     

A hybrid multiagent routing approach for wireless ad hoc networks

Wireless ad-hoc networks are infrastructureless networks that comprise wireless mobile nodes able to communicate each other outside wireless transmission range. Due to frequent network topology changes in one hand and the limited underlying bandwidth in the other hand, routing becomes a challenging task. In this paper we present a novel routing algorithm devoted for mobile ad hoc networks. It entails both reactive and proactive components. More precisely, the algorithm is based on ant general behavior, but differs from the classic ant methods inspired from Ant-Colony-Optimization algorithm [1]. We do not use, during the reactive phase, a broadcasting technique that exponentially increases the routing overhead, but we introduce a new reactive route discovery technique that considerably reduces the communication overhead. In the simulation results, we show that our protocol can outperform both Ad hoc On-demand Distance Vector (AODV) protocol [2], one of the most important current state-of-the-art algorithms, and AntHocNet protocol [5], one of the most important ant-based routing algorithms, in terms of end-to-end delay, packet delivery ratio and the communication overhead.     

Interference coordination for LTE-Advanced and FM broadcasting interoperability

The surest way to guarantee that multiple wireless systems can concurrently exist harmlessly, when operating in the same or adjacent channel, is by analyzing spectrum overlapping. This paper proposes a more accurate model to evaluate the interference power from co-channel and adjacent channel of orthogonal frequency division multiplexing-based long term evolution-advanced (LTE-Advanced) towards broadcasting frequency modulation systems at 800?MHz. Power spectral density overlapping factor is employed, and closed form of the interference power loss is derived. Numerical results demonstrate that the proposed method evaluates more exact interference power than the advanced minimum coupling loss (A-MCL) method, where the co-channel and adjacent channel interference powers are reduced by 1.3 and 3?dB, correspondingly, compared to that obtained using the A-MCL method. This decreases the minimum separation distance between the two systems, which can eventually lead to efficient radio spectrum resources utilization.     

On the design of highly linear CMOS digitally programmable operational transconductance amplifiers for low and high-frequency applications

This paper proposes a novel highly linear digitally programmable fully differential operational transconductance amplifier (DPOTA) circuit. Two versions of the proposed DPOTA structure are designed. The first version is optimized for high-frequency operation with current division networks designated to 3-bit control code words. On the other hand, the second version is optimized for low-frequency operation with 4-bit control code words. The third-order harmonic distortion (HD3) of the first DPOTA version remains below ? 66 dB up to 0.4 V differential input voltage at 10 MHz frequency. The second DPOTA version achieved HD3 of ? 70 dB with an amplitude of 20 mV_p–p and at 100 Hz frequency. The proposed circuits are designed and simulated in 90 nm CMOS model, BSIM4 (level 54) under a balanced 1.2 V supply voltage.     

New CMOS Fully‐Differential Transconductor and Application to a Fully‐Differential Gm‐C Filter

A new CMOS voltage‐controlled fully‐differential transconductor is presented. The basic structure of the proposed transconductor is based on a four‐MOS transistor cell operating in the triode or saturation region. It achieves a high linearity range of ± 1 V at a 1.5 V supply voltage. The proposed transconductor is used to realize a new fully‐differential Gm‐C low‐pass filter with a minimum number of transconductors and grounded capacitors. PSpice simulation results for the transconductor circuit and its filter application indicating the linearity range and verifying the analytical results using 0.35 μm technology are also given.     

Harvesting Lost Photons: Plasmon and Upconversion Enhanced Broadband Photocatalytic Activity in Core@Shell Microspheres Based on Lanthanide‐Doped NaYF4, TiO2, and Au

Efficiently harvesting solar energy for photocatalysis remains very challenging. Rational design of architectures by combining nanocomponents of radically different properties, for example, plasmonic, upconversion, and photocatalytic properties, offers a promising route to improve solar energy utilization. Herein, the synthesis of novel, plasmonic Au nanoparticle decorated NaYF₄:Yb³⁺, Er³⁺, Tm³⁺‐core@porous‐TiO₂‐shell microspheres is reported. They exhibit high surface area, good stability, broadband absorption from ultraviolet to near infrared, and excellent photocatalytic activity, significantly better than the benchmark P25 TiO₂. The enhanced activity is attributed to synergistic effects from nanocomponents arranged into the nanostructured architecture in such a way that favors the efficient charge/energy transfer among nanocomponents and largely reduced charge recombination. Optical and energy‐transfer properties are modeled theoretically to support our interpretations of catalytic mechanisms. In addition to yielding novel materials and interesting properties, the current work provides physical insights that can contribute to the future development of plasmon‐enhanced broadband catalysts.     

LAS Detector with Soft-Output MMSE Initialization Under Imperfect Channel Estimation and Channel Correlation

Wireless Personal Communications - This paper proposes a modified likelihood ascent search (LAS) algorithm for multiple-input multiple-output (MIMO) systems under correlated channel and imperfect...     

Best Minimum Summation Scheduler for Long Term Evolution

Resource scheduling in Long Term Evolution (LTE) is an open and rising issue. It has an enormous impact on the entire system performance. Due to the nature of LTE system, the scheduler has to be designed carefully. It has to overcome many challenges such as limited processing time and the high dynamic behavior. This paper proposes a novel scheduling policy for the MAC layer in LTE called the Best Minimum Summation (BMS). The main aim of this scheduling policy is to achieve high performance with low complexity. Three sub-schedulers have been developed. Each one of these schedulers deals with scheduling table in different dimension. The first one operates on the scheduling table through the user dimension (BMS.UE); while the second one operates on the scheduling table through the resource block dimension (BMS.RB). The third scheduler operates on the scheduling table correlating both of these dimensions (BMS.2D). All of the proposed solutions were intensively evaluated in a system level simulator. Three performance metrics were used which are throughput, error rate and fairness. The results have shown that the ability of the BMS.UE scheduler to outperform other existing schedulers of LTE.     

Catalyst Design by NH4OH Treatment of USY Zeolite

Hierarchical zeolites are a class of superior catalysts which couples the intrinsic zeolitic properties to enhanced accessibility and intracrystalline mass transport to and from the active sites. The design of hierarchical USY (Ultra‐Stable Y) catalysts is achieved using a sustainable postsynthetic room temperature treatment with mildly alkaline NH₄OH (0.02 m ) solutions. Starting from a commercial dealuminated USY zeolite (Si/Al = 47), a hierarchical material is obtained by selective and tuneable creation of interconnected and accessible small mesopores (2–6 nm). In addition, the treatment immediately yields the NH₄⁺ form without the need for additional ion exchange. After NH₄OH modification, the crystal morphology is retained, whereas the microporosity and relative crystallinity are decreased. The gradual formation of dense amorphous phases throughout the crystal without significant framework atom leaching rationalizes the very high material yields (>90%). The superior catalytic performance of the developed hierarchical zeolites is demonstrated in the acid‐catalyzed isomerization of α‐pinene and the metal‐catalyzed conjugation of safflower oil. Significant improvements in activity and selectivity are attained, as well as a lowered susceptibility to deactivation. The catalytic performance is intimately related to the introduced mesopores, hence enhanced mass transport capacity, and the retained intrinsic zeolitic properties.