Finding an optimization of the plate element of Egyptian research reactor using genetic algorithm

The second Egyptian research reactor ET-RR-2 went critical on the 27th of November 1997. The National Center of Nuclear Safety and Radiation Control （NCNSRC） has the responsibility of the evaluation and assessment of the safety of this reactor. The purpose of this paper is to present an approach to optimization of the fuel element plate. For an efficient search through the solution space we use a multi objective genetic algorithm which allows us to identify a set of Pareto optimal solutions providing the decision maker with the complete spectrum of optimal solutions with respect to the various targets. The aim of this paper is to propose a new approach for optimizing the fuel element plate in the reactor. The fuel element plate is designed with a view to improve reliability and lifetime and it is one of the most important elements during the shut down. In this present paper, we present a conceptual design approach for fuel element plate, in conjunction with a genetic algorithm to obtain a fuel plate that maximizes a fitness value to optimize the safety design of the fuel plate.     

Investigation of Tunnel-Soil-Pile Interaction in Cohesive Soils

Underground tunnels are considered to be a vital infrastructure component in most cities around the world. Careful planning is always necessary to ensure minimum impact on nearby surface and subsurface structures. This study describes the experimental investigation carried out to examine the effect of existing piles installed in cohesive soil and extended to bedrock on the circumferential stresses developing in a newly constructed tunnel supported by a flexible lining system. A small scale testing facility was designed and built to simulate the process of tunnel excavation and lining installation in the close vicinity of preinstalled model piles. Lining stresses were measured for different separation distances between the lining and the existing piles Consistent decrease in the lining load was observed when the piles are located within a distance of one tunnel diameter from the tunnel. The results presented in this study indicated that measuring the lining response near existing pile foundations may be used to evaluate the extent of the interaction between the lining and the surrounding piles.     

Reactions with 2,3,4,5-Tetrahydro-benzo[b]thiepin-5-one and its Derivatives

2,3,4,5-Tetrahydro-benzo[b]thiepin-5-one, its 7-methyl derivative, and their S, S-dioxides condense with aromatic aldehydes to give the corresponding 4-arylidene derivatives 3 and 4 . Compounds 4 react with hydrazine and phenylhydrazine to yield 3, 3a, 4, 5-tetrahydro-2 H-benzo-[b]thiepino[4, 5-c]pyrazole S, S-dioxide derivatives 5 and 6 . Some of the arylidene derivatives 4 add GRIGNARD reagents to give 7 . The IR spectra of representative examples are discussed.     

Reactions with 5-substituted 4-arylimino-2-thiazolidinones

The reaction of 5-arylidene-4-arylimino-2-thiazolidinones 4 with GRIGNARD reagents effected 1,4-addition to the exocyclic  CC bond with the formation of 5 . Alkylation of the arylidene derivatives 4 with diazomethane or methyl iodide results in the formation of the N-methyl derivatives 6 . Treatment of 6 with phenylmagnesium bromide effects addition of the reagent to the double bond of the lateral chain to yield products, proved to have structure 8 . The 5-arylazo derivatives 9 of 4-arylimino-2-thiazolidinones were obtained by coupling 4 with aromatic diazonium chlorides. Compounds 9 were N-methylated with diazomethane to yield 10 .     

Geometrical approach of planar hyper-redundant manipulators: Inverse kinematics,path planning and workspace

A new method for inverse kinematics for hyper-redundant manipulators is proposed in this paper to plan the path of the end-effector. The basic idea is that for a given smooth path consisting of points close enough to each other; computing the inverse kinematics for these points is carried out geometrically using the proposed method. In this method, the angles between the adjacent links are set to be the same, which makes lining up of two or more joint axes impossible; therefore, avoiding singularities. The manipulability index has been used to show how far the manipulator from the singularity configuration is. The determination of the workspace of the manipulator using the proposed method has been presented in this paper. The simulation results have been carried out on a planar and a three dimensional manipulators. The effectiveness of the proposed method is clearly demonstrated by comparing its result with results calculated by the well-known method of measuring manipulability which is used for singularity avoidance for the last two decades.     

Selective Recovery of Cadmium,Cobalt, and Nickel from Spent Ni–Cd Batteries Using Adogen® 464 and Mesoporous Silica Derivatives

Spent Ni–Cd batteries are now considered an important source for many valuable metals. The recovery of cadmium, cobalt, and nickel from spent Ni–Cd Batteries has been performed in this study. The optimum leaching process was achieved using 20% H₂SO₄, solid/liquid (S/L) 1/5 at 80 °C for 6 h. The leaching efficiency of Fe, Cd, and Co was nearly 100%, whereas the leaching efficiency of Ni was 95%. The recovery of the concerned elements was attained using successive different separation techniques. Cd(II) ions were extracted by a solvent, namely, Adogen^® 464, and precipitated as CdS with 0.5% Na₂S solution at pH of 1.25 and room temperature. The extraction process corresponded to pseudo-2nd-order. The prepared PTU-MS silica was applied for adsorption of Co(II) ions from aqueous solution, while the desorption process was performed using 0.3 M H₂SO₄. Cobalt was precipitated at pH 9.0 as Co(OH)₂ using NH₄OH. The kinetic and thermodynamic parameters were also investigated. Nickel was directly precipitated at pH 8.25 using a 10% NaOH solution at ambient temperature. FTIR, SEM, and EDX confirm the structure of the products.     

Light Spectral Composition Modifies Polyamine Metabolism in Young Wheat Plants

Although light-emitting diode (LED) technology has extended the research on targeted photomorphogenic, physiological, and biochemical responses in plants, there is not enough direct information about how light affects polyamine metabolism. In this study, the effect of three spectral compositions (referred to by their most typical characteristic: blue, red, and the combination of blue and red [pink] lights) on polyamine metabolism was compared to those obtained under white light conditions at the same light intensity. Although light quality induced pronounced differences in plant morphology, pigment contents, and the expression of polyamine metabolism-related genes, endogenous polyamine levels did not differ substantially. When exogenous polyamines were applied, their roborative effect were detected under all light conditions, but these beneficial changes were correlated with an increase in polyamine content and polyamine metabolism-related gene expression only under blue light. The effect of the polyamines on leaf gene expression under red light was the opposite, with a decreasing tendency. Results suggest that light quality may optimize plant growth through the adjustment of polyamine metabolism at the gene expression level. Polyamine treatments induced different strategies in fine-tuning of polyamine metabolism, which were induced for optimal plant growth and development under different spectral compositions.     

Preemptive cloud resource allocation modeling of processing jobs

Cloud computing allows execution and deployment of different types of applications such as interactive databases or web-based services which require distinctive types of resources. These applications lease cloud resources for a considerably long period and usually occupy various resources to maintain a high quality of service (QoS) factor. On the other hand, general big data batch processing workloads are less QoS-sensitive and require massively parallel cloud resources for short period. Despite the elasticity feature of cloud computing, fine-scale characteristics of cloud-based applications may cause temporal low resource utilization in the cloud computing systems, while process-intensive highly utilized workload suffers from performance issues. Therefore, ability of utilization efficient scheduling of heterogeneous workload is one challenging issue for cloud owners. In this paper, addressing the heterogeneity issue impact on low utilization of cloud computing system, conjunct resource allocation scheme of cloud applications and processing jobs is presented to enhance the cloud utilization. The main idea behind this paper is to apply processing jobs and cloud applications jointly in a preemptive way. However, utilization efficient resource allocation requires exact modeling of workloads. So, first, a novel methodology to model the processing jobs and other cloud applications is proposed. Such jobs are modeled as a collection of parallel and sequential tasks in a Markovian process. This enables us to analyze and calculate the efficient resources required to serve the tasks. The next step makes use of the proposed model to develop a preemptive scheduling algorithm for the processing jobs in order to improve resource utilization and its associated costs in the cloud computing system. Accordingly, a preemption-based resource allocation architecture is proposed to effectively and efficiently utilize the idle reserved resources for the processing jobs in the cloud paradigms. Then, performance metrics such as service time for the processing jobs are investigated. The accuracy of the proposed analytical model and scheduling analysis is verified through simulations and experimental results. The simulation and experimental results also shed light on the achievable QoS level for the preemptively allocated processing jobs.     

Automatic verification of reduction techniques in Higher Order Logic

In this paper we propose an automatic methodology to verify the soundness of model checking reduction techniques. The idea is to use the consistency of the specifications to verify if the reduced model is faithful to the original one. The user provides the reduction technique, the specification and the system under verification. Then, using Higher Order Logic he verifies automatically if the reduction technique is soundly applied. The method is completely defined in an MDG–HOL special integration platform that combines an automatic high level model checking tool Multiway Decision Graphs (MDGs) within the HOL theorem prover. We provide two case studies, the first one is the reduction using SAT–MDG of an Island Tunnel Controller and the second one is the MDG–HOL assume-guarantee reduction of the Look-Aside Interface. The obtained results of our approach offer a considerable gain in terms of the correctness of heuristics and reduction techniques as applied to commercial model checking, however a small penalty is paid in terms of CPU time and memory usage.     

Natural convection from isothermal flat surfaces

Local heat-transfer coefficients along a flat plate in natural convection in air were measured using Boelter-Schmidt type heat flux meters. Experiments were carried out for different temperature differences in heating and cooling, and with inclinations varying from the horizontal “facing upwards” position, through the vertical position, to the horizontal “facing downwards” position.

The results are presented in terms of local Nusselt number as a function of the local Grashof number “tangential component”. All runs were in the range accepted as that of laminar boundary layer flow. However, under certain conditions when the normal velocity component of the air is directed away from the surface, separated flow is indicated along the trailing part of the surface, well before turbulence sets in in the boundary layer. Separation starts at a certain point along the surface. This point is nearer to the leading edge the higher the temperature difference, and the larger the inclination of the surface to the vertical.

In a separation region, the flux density is uniform. In all other regions the results agreed closely with established theories of laminar boundary layer flow.

A leading adiabatic section, used in some of the experiments, did not affect the results. An appendix gives relations recommended for engineering calculations.