Selective Recovery of Cadmium,Cobalt, and Nickel from Spent Ni–Cd Batteries Using Adogen® 464 and Mesoporous Silica Derivatives

Spent Ni–Cd batteries are now considered an important source for many valuable metals. The recovery of cadmium, cobalt, and nickel from spent Ni–Cd Batteries has been performed in this study. The optimum leaching process was achieved using 20% H₂SO₄, solid/liquid (S/L) 1/5 at 80 °C for 6 h. The leaching efficiency of Fe, Cd, and Co was nearly 100%, whereas the leaching efficiency of Ni was 95%. The recovery of the concerned elements was attained using successive different separation techniques. Cd(II) ions were extracted by a solvent, namely, Adogen^® 464, and precipitated as CdS with 0.5% Na₂S solution at pH of 1.25 and room temperature. The extraction process corresponded to pseudo-2nd-order. The prepared PTU-MS silica was applied for adsorption of Co(II) ions from aqueous solution, while the desorption process was performed using 0.3 M H₂SO₄. Cobalt was precipitated at pH 9.0 as Co(OH)₂ using NH₄OH. The kinetic and thermodynamic parameters were also investigated. Nickel was directly precipitated at pH 8.25 using a 10% NaOH solution at ambient temperature. FTIR, SEM, and EDX confirm the structure of the products.     

Light Spectral Composition Modifies Polyamine Metabolism in Young Wheat Plants

Although light-emitting diode (LED) technology has extended the research on targeted photomorphogenic, physiological, and biochemical responses in plants, there is not enough direct information about how light affects polyamine metabolism. In this study, the effect of three spectral compositions (referred to by their most typical characteristic: blue, red, and the combination of blue and red [pink] lights) on polyamine metabolism was compared to those obtained under white light conditions at the same light intensity. Although light quality induced pronounced differences in plant morphology, pigment contents, and the expression of polyamine metabolism-related genes, endogenous polyamine levels did not differ substantially. When exogenous polyamines were applied, their roborative effect were detected under all light conditions, but these beneficial changes were correlated with an increase in polyamine content and polyamine metabolism-related gene expression only under blue light. The effect of the polyamines on leaf gene expression under red light was the opposite, with a decreasing tendency. Results suggest that light quality may optimize plant growth through the adjustment of polyamine metabolism at the gene expression level. Polyamine treatments induced different strategies in fine-tuning of polyamine metabolism, which were induced for optimal plant growth and development under different spectral compositions.     

Automatic verification of reduction techniques in Higher Order Logic

In this paper we propose an automatic methodology to verify the soundness of model checking reduction techniques. The idea is to use the consistency of the specifications to verify if the reduced model is faithful to the original one. The user provides the reduction technique, the specification and the system under verification. Then, using Higher Order Logic he verifies automatically if the reduction technique is soundly applied. The method is completely defined in an MDG–HOL special integration platform that combines an automatic high level model checking tool Multiway Decision Graphs (MDGs) within the HOL theorem prover. We provide two case studies, the first one is the reduction using SAT–MDG of an Island Tunnel Controller and the second one is the MDG–HOL assume-guarantee reduction of the Look-Aside Interface. The obtained results of our approach offer a considerable gain in terms of the correctness of heuristics and reduction techniques as applied to commercial model checking, however a small penalty is paid in terms of CPU time and memory usage.     

Natural convection from isothermal flat surfaces

Local heat-transfer coefficients along a flat plate in natural convection in air were measured using Boelter-Schmidt type heat flux meters. Experiments were carried out for different temperature differences in heating and cooling, and with inclinations varying from the horizontal “facing upwards” position, through the vertical position, to the horizontal “facing downwards” position.

The results are presented in terms of local Nusselt number as a function of the local Grashof number “tangential component”. All runs were in the range accepted as that of laminar boundary layer flow. However, under certain conditions when the normal velocity component of the air is directed away from the surface, separated flow is indicated along the trailing part of the surface, well before turbulence sets in in the boundary layer. Separation starts at a certain point along the surface. This point is nearer to the leading edge the higher the temperature difference, and the larger the inclination of the surface to the vertical.

In a separation region, the flux density is uniform. In all other regions the results agreed closely with established theories of laminar boundary layer flow.

A leading adiabatic section, used in some of the experiments, did not affect the results. An appendix gives relations recommended for engineering calculations.     

Robust design of processes and products using the mathematics of the stochastic frontier (SF)

The International Journal of Advanced Manufacturing Technology - The paper discusses a generic procedure for the parameter design of product and process development using planned and non-planned...     

Synthesis and Anti-Cancer Activity of New Pyrazolinyl-Indole Derivatives: Pharmacophoric Interactions and Docking Studies for Identifying New EGFR Inhibitors

Newly designed series of indole-containing pyrazole analogs, pyrazolinylindoles, were synthesized, and their structures were confirmed based on the spectral data of the ¹H NMR, ¹³C NMR, and HR-MS analyses. Preliminary anti-cancer activity testings were carried out by the National Cancer Institute, United States of America (NCI, USA). Compounds HD02, HD05, and HD12 demonstrated remarkable cytotoxic activities against nine categories of cancer types based cell line panels which included leukemia, colon, breast, melanoma, lungs, renal, prostate, CNS, and ovarian cancer cell lines. The highest cytotoxic effects were exhibited by the compounds HD02 [1-(5-(1-H-indol-3-yl)-3-(p-tolyl)-4,5-dihydro-1H-pyrazol-1-yl)-2-phenylethanone], HD05 [1-(3-(4-chlorophenyl)-5-(1H-indol-3-yl)-4,5-dihydro-1H-pyrazol-1-yl)-2-phenoxyethanone], and HD12 [(3-(4-chlorophenyl)-5-(1H-indol-3-yl)-4,5-dihydro-1H-pyrazol-1-yl)(pyridin-4-yl)methanone] against some of the 56 types of NCI-based cell lines in different panels. Compound HD05 showed the maximum range of cancer cell growth inhibitions against all categories of the cell lines in all nine panels. On average, in comparison to the referral standard, imatinib, at a dose level of 10 µM, the HD05 showed significant activity against leukemia in the range of 78.76%, as compared to the imatinib at 9% of cancer cells’ growth inhibitions. Molecular docking simulation studies were performed in silico on the epidermal growth factor receptor (EGFR) tyrosine kinase, in order to validate the activity.     

Modeling metallurgical responses of coal Tri-Flo separators by a novel BNN:a "Conscious-Lab" development

Tri-flo cyclone,as a dense-medium separation device,is one of the most typical environmentally friendly industrial techniques in the coal washery plants.Surpris...     

Reactions with Thiazolo[3,2-b]-s-triazol-3(2H)-ones

5-Aryl-3-carboxymethylthio-1,2,4-triazoles 2 are cyclised to 6-arylthiazolo[3,2-b]-s-triazol-3(2H)-ones 3 . This structural assignment has been based on IR and NMR spectra. 2-Arylmethylene-6-arylthiazolo[3,2-b]-s-triazol-3(2H)-ones 7 were prepared by several methods. Compounds 3 coupled with diazotised anilines to give 2,3-dihydro-6-arylthiazolo[3,2-b]-s-triazole-2,3-dione 2-arylhydrazones 8 . The action of amines on 3a opens the thiazolone ring with the formation of substituted (5-phenyltriazol-3-ylthio)-acetamides 9 .