All-optical 6- and 8-channel demultiplexers based on photonic crystal multilayer ring resonators in Si/C rods

In this paper, we employed multilayer ring resonators in a silicon rod base structure to realize 6-channel and 8-channel demultiplexers based on two-dimensional photonic crystals. Both the main rings and basic structures are composed of silicon rods, and the interior rings of the multilayer rings are composed of carbon. Employing silicon and carbon rods of different radii in multilayer ring resonators enhanced the coupling efficiency between the rings and waveguides. The average quality factor and power transmission efficiency were 4320 and 93%, respectively. Crosstalk values from \(-11\) to ?46 dB in conjunction with the mentioned characteristics suggest the use of the device for optical communication applications. The compact size of the proposed structure and the materials used make the proposed demultiplexer suitable for optical integrated circuits.     

Model-based design verification for embedded systems through SVOCL: an OCL extension for SystemVerilog

Model Based System Engineering (MBSE) is a renowned approach in the context of embedded systems development. It is frequently used to deal with the structural and behavioral aspects of system design. However, the verification of system design is generally performed in isolation. It is particularly true in the context of assertion based verification. Consequently, there is a huge gap between system design and its verification that seriously effects the productivity and time-to market objectives. Therefore, in this research, we target to reduce this gap by exploiting the features of MBSE and SystemVerilog assertions (SVA’s). This article introduces a novel MBSE approach to model the design verification aspects of embedded systems, along with the system design (structural and behavioral aspects). We propose SystemVerilog in Object Constraint Language (SVOCL), an OCL temporal extension for SystemVerilog, to represent the design verification requirements by means of SVA’s. As a part of research, SVOCL transformation engine has been developed to generate SVA’s code in order to automate the design verification of embedded systems. The application of SVOCL has been validated through four case studies.     

Implicit polynomial representation through a fast fitting error estimation

This paper presents a simple distance estimation for implicit polynomial fitting. It is computed as the height of a simplex built between the point and the surface (i.e., a triangle in 2-D or a tetrahedron in 3-D), which is used as a coarse but reliable estimation of the orthogonal distance. The proposed distance can be described as a function of the coefficients of the implicit polynomial. Moreover, it is differentiable and has a smooth behavior . Hence, it can be used in any gradient-based optimization. In this paper, its use in a Levenberg-Marquardt framework is shown, which is particularly devoted for nonlinear least squares problems. The proposed estimation is a generalization of the gradient-based distance estimation, which is widely used in the literature. Experimental results, both in 2-D and 3-D data sets, are provided. Comparisons with state-of-the-art techniques are presented, showing the advantages of the proposed approach.     

Robust weighted graph transformation matching for rigid and nonrigid image registration

This paper presents an automatic point matching algorithm for establishing accurate match correspondences in two or more images. The proposed algorithm utilizes a group of feature points to explore their geometrical relationship in a graph arrangement. The algorithm starts with a set of matches (including outliers) between the two images. A set of nondirectional graphs is then generated for each feature and its K nearest matches (chosen from the initial set). Using the angular distances between edges that connect a feature point to its K nearest neighbors in the graph, the algorithm finds a graph in the second image that is similar to the first graph. In the case of a graph including outliers, the algorithm removes such outliers (one by one, according to their strength) from the graph and re-evaluates the angles until the two graphs are matched or discarded. This is a simple intuitive and robust algorithm that is inspired by a previous work. Experimental results demonstrate the superior performance of this algorithm under various conditions, such as rigid and nonrigid transformations, ambiguity due to partial occlusions or match correspondence multiplicity, scale, and larger view variation.     

An electrically and optically gate-controlled Schottky/2DEGvaractor

A novel gate-controlled varactor is reported. The three-terminal varactor is a modulation-doped heterostructure of AlGaAs/GaAs with two Schottky contacts directly made to a two-dimensional electron gas (2DEG). The third, gate, contact is formed from highly doped n⁺ GaAs material to allow an open optical window that can be used for optical gating and mixing. Structure capacitance is less than 1 pF and a change of more than 30% from the zero bias capacitance is observed with the applied gate voltage. The capacitance also increases proportionally with applied light and inversely with the terminal voltage     

Comparative study of two CPU router time management algorithms in cellular IP networks

Providing good quality of service (QoS) in cellular IP networks is an important requirement for performance improvement of the cellular IP network. Resource reservation is one of the methods used in achieving this goal and is proven to be effective. The main resources to be reserved in a cellular IP network are bandwidth, buffer and central processing unit (CPU) cycles. Router CPU cycle is the time taken by the router to process the packet of the flow before forwarding it to the next router (hop). This paper proposes a model for CPU cycle optimization of routers for real‐time flows in a cellular IP network. The model applies both genetic algorithm (GA) and particle swarm optimization (PSO) as soft computing tools to optimize the CPU cycles and reduces the flow processing time at each router in the route taken by a flow. Simulation experiments illustrate a comparative study of the model.     

Utility-based adaptive radio resource allocation in OFDM wireless networks with traffic prioritization

In this letter, a joint transmit scheduling and dynamic sub-carrier and power allocation method is proposed to exploit multi-user diversity in downlink packet transmission in an OFDM wireless network with mixed real-time and non-real-time traffic patterns. To balance efficiency and fairness and to satisfy the QoS requirements of real-time users, we utilize a utility-based framework and propose a polynomial-time heuristic algorithm to solve the formulated optimization problem. The distinguishing feature of the proposed method is that it gives in one shot, the transmission scheduling, the sub-carriers assigned to each user, and the power allocated to each sub-carrier, based on a fair and efficient framework while satisfying the delay requirements of real-time users.     

A new learning automata based approach for increasing utility of service providers

Utility is an important factor for serviceproviders, and they try to increase their utilities through adopting different policies and strategies. Because of unpredictable failures in systems, there are many scenarios in which the failures may cause random losses for service providers. Loss sharing can decrease negative effects of unexpected random losses. Because of capabilities of learning automata in random and stochastic environments, in this paper, a new learning automaton based method is presented for loss sharing purpose. It is illustrated that the loss sharing can be useful for service providers and helps them to decrease negative effect of the random losses. The presented method can be used especially in collaborative environments such as federated clouds. Results of the conducted experiments show the usefulness of the presented approach to improve utility of service providers.     

Multi-Stage CMOS OTA Frequency Compensation: Genetic algorithm approach

Multistage amplifiers have become appropriate choices for high-speed electronics and data conversion. Because of the large number of high-impedance nodes, frequency compensation has become the biggest challenge in the design of multistage amplifiers. The new compensation technique in this study uses two differential stages to organize feedforward and feedback paths. Five Miller loops and a 500-pF load capacitor are driven by just two tiny compensating capacitors, each with a capacitance of less than 10 pF. The symbolic transfer function is calculated to estimate the circuit dynamics and HSPICE and TSMC 0.18 μm. CMOS technology is used to simulate the proposed five-stage amplifier. A straightforward iterative approach is also used to optimize the circuit parameters given a known cost function. According to simulation and mathematical results, the proposed structure has a DC gain of 190 dB, a gain bandwidth product of 15 MHz, a phase margin of 89°, and a power dissipation of 590 μW.     

Recapillarity: Electrochemically Controlled Capillary Withdrawal of a Liquid Metal Alloy from Microchannels

This paper describes the mechanistic details of an electrochemical method to control the withdrawal of a liquid metal alloy, eutectic gallium indium (EGaIn), from microfluidic channels. EGaIn is one of several alloys of gallium that are liquid at room temperature and form a thin (nm scale) surface oxide that stabilizes the shape of the metal in microchannels. Applying a reductive potential to the metal removes the oxide in the presence of electrolyte and induces capillary behavior; we call this behavior “recapillarity” because of the importance of electrochemical reduction to the process. Recapillarity can repeatably toggle on and off capillary behavior by applying voltage, which is useful for controlling the withdrawal of metal from microchannels. This paper explores the mechanism of withdrawal and identifies the applied current as the key factor dictating the withdrawal velocity. Experimental observations suggest that this current may be necessary to reduce the oxide on the leading interface of the metal as well as the oxide sandwiched between the wall of the microchannel and the bulk liquid metal. The ability to control the shape and position of a metal using an applied voltage may prove useful for shape reconfigurable electronics, optics, transient circuits, and microfluidic components.